Skip to content

M
MarlinKimbra
Commit 691547bd authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Merge branch 'master' into k40_flow_cooler

parents 09ccdb59 8cd7f8fa
Pipeline #92 skipped
Expand all Show whitespace changes
Inline Side-by-side
Showing with 3571 additions and 2922 deletions
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Cartesian.h
View file @ 691547bd
......@@ -8,14 +8,15 @@
* - Endstop pullup resistors
* - Endstops logic
* - Endstops min or max
* - Min Z height for homing
* - Stepper enable logic
* - Stepper step logic
* - Stepper direction
* - Disables axis
* - Travel limits
* - Axis relative mode
* - MBL or ABL
* - Auto bed levelling
* - Mesh Bed Leveling (MBL)
* - Auto Bed Leveling (ABL)
* - Z probe endstop
* - Safe Z homing
* - Manual home positions
......@@ -27,6 +28,7 @@
* - Cartesian Correction
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -104,6 +106,18 @@
/*****************************************************************************************/
/*****************************************************************************************
***************************** MIN Z HEIGHT FOR HOMING **********************************
*****************************************************************************************
* *
* (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, *
* Be sure you have this distance over your Z_MAX_POS in case. *
* *
*****************************************************************************************/
#define MIN_Z_HEIGHT_FOR_HOMING 0
/*****************************************************************************************/
/*****************************************************************************************
********************************* Stepper enable logic **********************************
*****************************************************************************************
......@@ -216,24 +230,27 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
* *
******************************* Mesh Bed Leveling ***************************************
*****************************************************************************************/
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
//#define MESH_BED_LEVELING
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define MESH_INSET 10 // Mesh inset margin on print area
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
#define MESH_NUM_Y_POINTS 3
#define MESH_HOME_SEARCH_Z 5 // Z after Home, bed somewhere below but above 0.0.
// After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
//#define MESH_G28_REST_ORIGIN
// Add display menu option for bed leveling.
//#define MANUAL_BED_LEVELING
// Step size while manually probing Z axis.
#define MBL_Z_STEP 0.025
/*****************************************************************************************/
/*****************************************************************************************
******************************* Auto bed levelling **************************************
******************************* Auto Bed Leveling ***************************************
*****************************************************************************************
* *
* There are 2 different ways to specify probing locations *
......@@ -248,7 +265,7 @@
* You specify the XY coordinates of all 3 points. *
* *
* *
* Uncomment AUTO_BED_LEVELING_FEATURE to enable *
* Uncomment AUTO BED LEVELING FEATURE to enable *
* *
*****************************************************************************************/
//#define AUTO_BED_LEVELING_FEATURE
......@@ -258,14 +275,22 @@
// Note: this feature generates 10KB extra code size
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// START yes AUTO BED LEVELING GRID
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
// The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// END yes AUTO BED LEVELING GRID
// no AUTO_BED_LEVELING_GRID
// START no AUTO BED LEVELING GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15
......@@ -274,7 +299,7 @@
#define ABL_PROBE_PT_2_Y 15
#define ABL_PROBE_PT_3_X 180
#define ABL_PROBE_PT_3_Y 15
// no AUTO_BED_LEVELING_GRID
// END no AUTO BED LEVELING GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
......@@ -288,12 +313,12 @@
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
// (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 10 // (in mm) Raise Z before homing (G28) for Probe Clearance.
// Be sure you have this distance over your Z_MAX_POS in case
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define Z_RAISE_BEFORE_PROBING 10 //How much the extruder will be raised before travelling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when travelling from between next probing points
......
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Feature.h
View file @ 691547bd
......@@ -23,6 +23,7 @@
* - Software endstops
* - Endstops only for homing
* - Abort on endstop hit feature
* - Mesh Level Area
* - R/C Servo
* - Late Z axis
* - Ahead slowdown
......@@ -437,6 +438,23 @@
**************************************************************************/
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
#define ABORT_ON_ENDSTOP_HIT_INIT true
/**************************************************************************/
/**************************************************************************
*************************** Mesh Level Area ******************************
**************************************************************************
* *
* Default mesh area is an area with an inset margin on the print area. *
* Below are the macros that are used to define the borders for the mesh *
* area, made available here for specialized needs. *
* *
**************************************************************************/
#define MESH_MIN_X (X_MIN_POS + MESH_INSET)
#define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
#define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
#define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
/**************************************************************************/
/**************************************************************************
......@@ -1195,9 +1213,9 @@
************************** Motor's current ****************************
***********************************************************************/
// Motor Current setting (Only functional on ALLIGATOR BOARD)
#define MOTOR_CURRENT {1, 1, 1, 1, 1, 1, 1} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
#define MOTOR_CURRENT {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
#define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
/***********************************************************************/
......
Documentation/Laser/K40_ramps_configs/K40_no_cooler_no_flowmeter/Configuration_Pins.h
View file @ 691547bd
......@@ -114,6 +114,7 @@
#elif LASER_CONTROL == 2
#define LASER_PWR_PIN 6
#define LASER_TTL_PIN 5
#endif
#if ENABLED(LASER_PERIPHERALS)
#define LASER_PERIPHERALS_PIN 11
#define LASER_PERIPHERALS_STATUS_PIN 14
......
Documentation/Laser/K40_ramps_configs/K40_with_cooler_and_flowmeter/Configuration_Cartesian.h
View file @ 691547bd
......@@ -8,14 +8,15 @@
* - Endstop pullup resistors
* - Endstops logic
* - Endstops min or max
* - Min Z height for homing
* - Stepper enable logic
* - Stepper step logic
* - Stepper direction
* - Disables axis
* - Travel limits
* - Axis relative mode
* - MBL or ABL
* - Auto bed levelling
* - Mesh Bed Leveling (MBL)
* - Auto Bed Leveling (ABL)
* - Z probe endstop
* - Safe Z homing
* - Manual home positions
......@@ -27,6 +28,7 @@
* - Cartesian Correction
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -104,6 +106,18 @@
/*****************************************************************************************/
/*****************************************************************************************
***************************** MIN Z HEIGHT FOR HOMING **********************************
*****************************************************************************************
* *
* (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, *
* Be sure you have this distance over your Z_MAX_POS in case. *
* *
*****************************************************************************************/
#define MIN_Z_HEIGHT_FOR_HOMING 0
/*****************************************************************************************/
/*****************************************************************************************
********************************* Stepper enable logic **********************************
*****************************************************************************************
......@@ -216,24 +230,27 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
* *
******************************* Mesh Bed Leveling ***************************************
*****************************************************************************************/
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
//#define MESH_BED_LEVELING
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define MESH_INSET 10 // Mesh inset margin on print area
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
#define MESH_NUM_Y_POINTS 3
#define MESH_HOME_SEARCH_Z 5 // Z after Home, bed somewhere below but above 0.0.
// After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
//#define MESH_G28_REST_ORIGIN
// Add display menu option for bed leveling.
//#define MANUAL_BED_LEVELING
// Step size while manually probing Z axis.
#define MBL_Z_STEP 0.025
/*****************************************************************************************/
/*****************************************************************************************
******************************* Auto bed levelling **************************************
******************************* Auto Bed Leveling ***************************************
*****************************************************************************************
* *
* There are 2 different ways to specify probing locations *
......@@ -248,7 +265,7 @@
* You specify the XY coordinates of all 3 points. *
* *
* *
* Uncomment AUTO_BED_LEVELING_FEATURE to enable *
* Uncomment AUTO BED LEVELING FEATURE to enable *
* *
*****************************************************************************************/
//#define AUTO_BED_LEVELING_FEATURE
......@@ -258,14 +275,22 @@
// Note: this feature generates 10KB extra code size
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// START yes AUTO BED LEVELING GRID
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
// The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// END yes AUTO BED LEVELING GRID
// no AUTO_BED_LEVELING_GRID
// START no AUTO BED LEVELING GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15
......@@ -274,7 +299,7 @@
#define ABL_PROBE_PT_2_Y 15
#define ABL_PROBE_PT_3_X 180
#define ABL_PROBE_PT_3_Y 15
// no AUTO_BED_LEVELING_GRID
// END no AUTO BED LEVELING GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
......@@ -288,12 +313,12 @@
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
// (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 10 // (in mm) Raise Z before homing (G28) for Probe Clearance.
// Be sure you have this distance over your Z_MAX_POS in case
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define Z_RAISE_BEFORE_PROBING 10 //How much the extruder will be raised before travelling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when travelling from between next probing points
......
Documentation/Laser/K40_ramps_configs/K40_with_cooler_and_flowmeter/Configuration_Feature.h
View file @ 691547bd
......@@ -23,6 +23,7 @@
* - Software endstops
* - Endstops only for homing
* - Abort on endstop hit feature
* - Mesh Level Area
* - R/C Servo
* - Late Z axis
* - Ahead slowdown
......@@ -437,6 +438,23 @@
**************************************************************************/
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
#define ABORT_ON_ENDSTOP_HIT_INIT true
/**************************************************************************/
/**************************************************************************
*************************** Mesh Level Area ******************************
**************************************************************************
* *
* Default mesh area is an area with an inset margin on the print area. *
* Below are the macros that are used to define the borders for the mesh *
* area, made available here for specialized needs. *
* *
**************************************************************************/
#define MESH_MIN_X (X_MIN_POS + MESH_INSET)
#define MESH_MAX_X (X_MAX_POS - (MESH_INSET))
#define MESH_MIN_Y (Y_MIN_POS + MESH_INSET)
#define MESH_MAX_Y (Y_MAX_POS - (MESH_INSET))
/**************************************************************************/
/**************************************************************************
......@@ -1195,9 +1213,9 @@
************************** Motor's current ****************************
***********************************************************************/
// Motor Current setting (Only functional on ALLIGATOR BOARD)
#define MOTOR_CURRENT {1, 1, 1, 1, 1, 1, 1} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
#define MOTOR_CURRENT {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
#define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
/***********************************************************************/
......
Documentation/Laser/K40_ramps_configs/K40_with_cooler_and_flowmeter/Configuration_Pins.h
View file @ 691547bd
......@@ -114,6 +114,7 @@
#elif LASER_CONTROL == 2
#define LASER_PWR_PIN 6
#define LASER_TTL_PIN 5
#endif
#if ENABLED(LASER_PERIPHERALS)
#define LASER_PERIPHERALS_PIN 11
#define LASER_PERIPHERALS_STATUS_PIN 14
......
MK/Configuration_Cartesian.h
View file @ 691547bd
......@@ -15,8 +15,8 @@
* - Disables axis
* - Travel limits
* - Axis relative mode
* - MBL or ABL
* - Auto bed levelling
* - Mesh Bed Leveling (MBL)
* - Auto Bed Leveling (ABL)
* - Z probe endstop
* - Safe Z homing
* - Manual home positions
......@@ -28,6 +28,7 @@
* - Cartesian Correction
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -229,24 +230,7 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
* *
*****************************************************************************************/
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
/*****************************************************************************************/
/*****************************************************************************************
******************************* Mesh bed leveling ***************************************
******************************* Mesh Bed Leveling ***************************************
*****************************************************************************************/
//#define MESH_BED_LEVELING
......@@ -266,7 +250,7 @@
/*****************************************************************************************
******************************* Auto bed leveling ***************************************
******************************* Auto Bed Leveling ***************************************
*****************************************************************************************
* *
* There are 2 different ways to specify probing locations *
......@@ -281,7 +265,7 @@
* You specify the XY coordinates of all 3 points. *
* *
* *
* Uncomment AUTO_BED_LEVELING_FEATURE to enable *
* Uncomment AUTO BED LEVELING FEATURE to enable *
* *
*****************************************************************************************/
//#define AUTO_BED_LEVELING_FEATURE
......@@ -291,14 +275,22 @@
// Note: this feature generates 10KB extra code size
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// START yes AUTO BED LEVELING GRID
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
// The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// END yes AUTO BED LEVELING GRID
// no AUTO_BED_LEVELING_GRID
// START no AUTO BED LEVELING GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15
......@@ -307,7 +299,7 @@
#define ABL_PROBE_PT_2_Y 15
#define ABL_PROBE_PT_3_X 180
#define ABL_PROBE_PT_3_Y 15
// no AUTO_BED_LEVELING_GRID
// END no AUTO BED LEVELING GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
......@@ -321,10 +313,13 @@
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
// (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define Z_RAISE_BEFORE_PROBING 10 //How much the extruder will be raised before travelling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when travelling from between next probing points
#define Z_RAISE_AFTER_PROBING 5 //How much the extruder will be raised after the last probing point.
......
MK/Configuration_Core.h
View file @ 691547bd
......@@ -16,8 +16,8 @@
* - Disables axis
* - Travel limits
* - Axis relative mode
* - MBL or ABL
* - Auto bed levelling
* - Mesh Bed Leveling (MBL)
* - Auto Bed Leveling (ABL)
* - Z probe endstop
* - Safe Z homing
* - Manual home positions
......@@ -28,6 +28,7 @@
* - Hotend offset
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -251,24 +252,7 @@
/*****************************************************************************************
************************************** MBL or ABL ***************************************
*****************************************************************************************
* *
* Manual Bed Leveling (MBL) or Auto Bed Leveling (ABL) settings *
* Set the rectangle in which to probe in MBL or ABL. *
* *
*****************************************************************************************/
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
/*****************************************************************************************/
/*****************************************************************************************
******************************* Mesh bed leveling ***************************************
******************************* Mesh Bed Leveling ***************************************
*****************************************************************************************/
//#define MESH_BED_LEVELING
......@@ -288,7 +272,7 @@
/*****************************************************************************************
******************************* Auto bed leveling ***************************************
******************************* Auto Bed Leveling ***************************************
*****************************************************************************************
* *
* There are 2 different ways to specify probing locations *
......@@ -303,7 +287,7 @@
* You specify the XY coordinates of all 3 points. *
* *
* *
* Uncomment AUTO_BED_LEVELING_FEATURE to enable *
* Uncomment AUTO BED LEVELING FEATURE to enable *
* *
*****************************************************************************************/
//#define AUTO_BED_LEVELING_FEATURE
......@@ -313,14 +297,22 @@
// Note: this feature generates 10KB extra code size
#define AUTO_BED_LEVELING_GRID
// yes AUTO_BED_LEVELING_GRID
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
// START yes AUTO BED LEVELING GRID
#define LEFT_PROBE_BED_POSITION 20
#define RIGHT_PROBE_BED_POSITION 180
#define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 180
// The probe square sides can be no smaller than this
#define MIN_PROBE_EDGE 10
// Set the number of grid points per dimension
// You probably don't need more than 3 (squared=9)
#define AUTO_BED_LEVELING_GRID_POINTS 2
// yes AUTO_BED_LEVELING_GRID
// END yes AUTO BED LEVELING GRID
// no AUTO_BED_LEVELING_GRID
// START no AUTO BED LEVELING GRID
// Arbitrary points to probe. A simple cross-product
// is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15
......@@ -329,7 +321,7 @@
#define ABL_PROBE_PT_2_Y 15
#define ABL_PROBE_PT_3_X 180
#define ABL_PROBE_PT_3_Y 15
// no AUTO_BED_LEVELING_GRID
// END no AUTO BED LEVELING GRID
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
......@@ -343,10 +335,13 @@
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
// (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define XY_TRAVEL_SPEED 10000 // X and Y axis travel speed between probes, in mm/min
#define Z_RAISE_BEFORE_PROBING 10 //How much the extruder will be raised before travelling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when travelling from between next probing points
#define Z_RAISE_AFTER_PROBING 5 //How much the extruder will be raised after the last probing point.
......
MK/Configuration_Scara.h
View file @ 691547bd
......@@ -9,6 +9,7 @@
* - Endstop pullup resistors
* - Endstops logic
* - Endstops min or max
* - Min Z height for homing
* - Stepper enable logic
* - Stepper step logic
* - Stepper direction
......@@ -24,6 +25,7 @@
* - Hotend offset
*
* Basic-settings can be found in Configuration_Basic.h
* Temperature-settings can be found in Configuration_Temperature.h
* Feature-settings can be found in Configuration_Feature.h
* Pins-settings can be found in "Configuration_Pins.h"
*/
......@@ -124,6 +126,18 @@
/*****************************************************************************************/
/*****************************************************************************************
***************************** MIN Z HEIGHT FOR HOMING **********************************
*****************************************************************************************
* *
* (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, *
* Be sure you have this distance over your Z_MAX_POS in case. *
* *
*****************************************************************************************/
#define MIN_Z_HEIGHT_FOR_HOMING 0
/*****************************************************************************************/
/*****************************************************************************************
********************************* Stepper enable logic **********************************
*****************************************************************************************
......
MK/Configuration_Store.cpp
View file @ 691547bd
This diff is collapsed.
MK/base.h
View file @ 691547bd
......@@ -61,12 +61,10 @@
#include "module/language/language.h"
#include "module/printcounter/printcounter.h"
#include "module/MK_Main.h"
#include "module/motion/planner.h"
#include "module/planner/planner.h"
#include "module/endstop/endstops.h"
#include "module/motion/stepper_indirection.h"
#include "module/motion/stepper.h"
#include "module/motion/endstops.h"
#include "module/motion/vector_3.h"
#include "module/motion/qr_solve.h"
#include "module/motion/cartesian_correction.h"
#include "module/temperature/temperature.h"
#include "module/sensor/flowmeter.h"
......
MK/module/MK_Main.cpp
View file @ 691547bd
This diff is collapsed.
MK/module/MK_Main.h
View file @ 691547bd
......@@ -79,8 +79,12 @@ void prepare_move();
void kill(const char *);
void Stop();
#if !MECH(DELTA) && !MECH(SCARA)
void set_current_position_from_planner();
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
void filrunout();
void handle_filament_runout();
#endif
/**
......
MK/module/conditionals.h
View file @ 691547bd
......@@ -444,6 +444,9 @@
#define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#define HAS_Z_ENDSTOP_SERVO (ENABLED(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
#define SERVO_LEVELING (ENABLED(AUTO_BED_LEVELING_FEATURE) && HAS_Z_ENDSTOP_SERVO)
// Make sure probing points are reachable
#if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
#undef LEFT_PROBE_BED_POSITION
......
MK/module/digipot/digipot_mcp4451.cpp
View file @ 691547bd
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../base.h"
#if ENABLED(DIGIPOT_I2C)
......
MK/module/digipot/digipot_mcp4451.h
View file @ 691547bd
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef DIGIPOT_MCP4451_H
#define DIGIPOT_MCP4451_H
......
MK/module/motion/endstops.cpp → MK/module/endstop/endstops.cpp
View file @ 691547bd
......@@ -25,7 +25,7 @@
*/
#include "../../base.h"
#include "endstops.h"
//#include "endstops.h"
// TEST_ENDSTOP: test the old and the current status of an endstop
#define TEST_ENDSTOP(ENDSTOP) (TEST(current_endstop_bits & old_endstop_bits, ENDSTOP))
......@@ -189,6 +189,9 @@ void Endstops::report_state() {
card.sdprinting = false;
card.closeFile();
quickStop();
#if NOMECH(DELTA) && NOMECH(SCARA)
set_current_position_from_planner();
#endif
disable_all_heaters(); // switch off all heaters.
disable_all_coolers();
}
......
MK/module/laser/laser.cpp
View file @ 691547bd
/**
* MK & MK4due 3D Printer Firmware
*
......@@ -24,6 +23,7 @@
/**
* laser.cpp - Laser control library for Arduino using 16 bit timers- Version 1
* Copyright (c) 2013 Timothy Schmidt. All right reserved.
* Copyright (c) 2016 Franco (nextime) Lanza
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
......@@ -335,7 +335,6 @@
}
}
}
#endif // LASER_PERIPHERALS
#endif // LASERBEAM
MK/module/laser/laser.h
View file @ 691547bd
......@@ -23,6 +23,7 @@
/**
* laser.cpp - Laser control library for Arduino using 16 bit timers- Version 1
* Copyright (c) 2013 Timothy Schmidt. All right reserved.
* Copyright (c) 2016 Franco (nextime) Lanza
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
......
MK/module/lcd/ultralcd.cpp
View file @ 691547bd
This diff is collapsed.
MK/module/mbl/mesh_bed_leveling.cpp
View file @ 691547bd
......@@ -29,7 +29,7 @@
mesh_bed_leveling::mesh_bed_leveling() { reset(); }
void mesh_bed_leveling::reset() {
active = 0;
status = MBL_STATUS_NONE;
z_offset = 0;
for (int8_t y = MESH_NUM_Y_POINTS; y--;)
for (int8_t x = MESH_NUM_X_POINTS; x--;)
......
MK/module/mbl/mesh_bed_leveling.h
View file @ 691547bd
......@@ -22,12 +22,14 @@
#if ENABLED(MESH_BED_LEVELING)
enum MBLStatus { MBL_STATUS_NONE = 0, MBL_STATUS_HAS_MESH_BIT = 0, MBL_STATUS_ACTIVE_BIT = 1 };
#define MESH_X_DIST ((MESH_MAX_X - (MESH_MIN_X))/(MESH_NUM_X_POINTS - 1))
#define MESH_Y_DIST ((MESH_MAX_Y - (MESH_MIN_Y))/(MESH_NUM_Y_POINTS - 1))
class mesh_bed_leveling {
public:
bool active;
uint8_t status; // Has Mesh and Is Active bits
float z_offset;
float z_values[MESH_NUM_Y_POINTS][MESH_NUM_X_POINTS];
......@@ -39,6 +41,11 @@
static FORCE_INLINE float get_probe_y(int8_t i) { return MESH_MIN_Y + (MESH_Y_DIST) * i; }
void set_z(const int8_t px, const int8_t py, const float z) { z_values[py][px] = z; }
bool active() { return TEST(status, MBL_STATUS_ACTIVE_BIT); }
void set_active(bool onOff) { if (onOff) SBI(status, MBL_STATUS_ACTIVE_BIT); else CBI(status, MBL_STATUS_ACTIVE_BIT); }
bool has_mesh() { return TEST(status, MBL_STATUS_HAS_MESH_BIT); }
void set_has_mesh(bool onOff) { if (onOff) SBI(status, MBL_STATUS_HAS_MESH_BIT); else CBI(status, MBL_STATUS_HAS_MESH_BIT); }
inline void zigzag(int8_t index, int8_t &px, int8_t &py) {
px = index % (MESH_NUM_X_POINTS);
py = index / (MESH_NUM_X_POINTS);
......
MK/module/mechanics.h
View file @ 691547bd
......@@ -34,5 +34,6 @@
#define MECH_SCARA 4
#define MECH(mech) (MECHANISM == MECH_##mech)
#define NOMECH(mech) (MECHANISM != MECH_##mech)
#endif
\ No newline at end of file
MK/module/motion/cartesian_correction.cpp
View file @ 691547bd
......@@ -22,7 +22,7 @@
/**
* cartesian_correction.cpp
* A class that manages hysteresis by inserting extra plan_buffer_line when necessary
* A class that manages hysteresis by inserting extra planner.buffer_line when necessary
* A class that manages ZWobble
*
* Copyright (c) 2012 Neil James Martin
......@@ -86,7 +86,7 @@
//===========================================================================
void Hysteresis::calcSteps() {
for (uint8_t i = 0; i < NUM_AXIS; i++)
m_hysteresis_steps[i] = (long)(m_hysteresis_mm[i] * axis_steps_per_unit[i]);
m_hysteresis_steps[i] = (long)(m_hysteresis_mm[i] * planner.axis_steps_per_unit[i]);
}
//===========================================================================
......@@ -135,9 +135,9 @@
}
//===========================================================================
// insert a plan_buffer_line if required to handle any hysteresis
// insert a planner.buffer_line if required to handle any hysteresis
void Hysteresis::InsertCorrection(const float x, const float y, const float z, const float e) {
long destination[NUM_AXIS] = {x * axis_steps_per_unit[X_AXIS], y * axis_steps_per_unit[Y_AXIS], z * axis_steps_per_unit[Z_AXIS], e * axis_steps_per_unit[E_AXIS + active_extruder]};
long destination[NUM_AXIS] = {x * planner.axis_steps_per_unit[X_AXIS], y * planner.axis_steps_per_unit[Y_AXIS], z * planner.axis_steps_per_unit[Z_AXIS], e * planner.axis_steps_per_unit[E_AXIS + active_extruder]};
uint8_t direction_bits = calc_direction_bits(position, destination);
uint8_t move_bits = calc_move_bits(position, destination);
......@@ -459,12 +459,12 @@
}
//===========================================================================
// insert a plan_buffer_line if required to handle any hysteresis
// insert a planner.buffer_line if required to handle any hysteresis
void ZWobble::InsertCorrection(const float targetZ) {
if (!m_consistent) return; // don't go through consistency checks all the time; just check one bool
float originZ = (float)position[Z_AXIS] / axis_steps_per_unit[Z_AXIS];
float originZ = (float)position[Z_AXIS] / planner.axis_steps_per_unit[Z_AXIS];
if (originZ < ZWOBBLE_MIN_Z || targetZ < ZWOBBLE_MIN_Z) return;
......@@ -492,7 +492,7 @@
ECHO_MV(" Target Rod: ", targetZRod);
// difference in steps between the correct movement (originZRod->targetZRod) and the planned movement
long stepDiff = lround((targetZRod - originZRod) * axis_steps_per_unit[Z_AXIS]) - (lround(targetZ * axis_steps_per_unit[Z_AXIS]) - position[Z_AXIS]);
long stepDiff = lround((targetZRod - originZRod) * planner.axis_steps_per_unit[Z_AXIS]) - (lround(targetZ * planner.axis_steps_per_unit[Z_AXIS]) - position[Z_AXIS]);
if (DEBUGGING(DEBUG))
ECHO_EMV(" stepDiff: ", stepDiff);
......
MK/module/motion/cartesian_correction.h
View file @ 691547bd
......@@ -22,7 +22,7 @@
/**
* cartesian_correction.h
* A class that manages hysteresis by inserting extra plan_buffer_line when necessary
* A class that manages hysteresis by inserting extra planner.buffer_line when necessary
* A class that manages ZWobble
*
* Copyright (c) 2012 Neil James Martin
......
MK/module/motion/qr_solve.cpp deleted 100644 → 0
View file @ 09ccdb59
This diff is collapsed.
MK/module/motion/stepper.cpp
View file @ 691547bd
......@@ -417,7 +417,7 @@ ISR(TIMER1_COMPA_vect) {
if (cleaning_buffer_counter) {
current_block = NULL;
plan_discard_current_block();
planner.discard_current_block();
#if ENABLED(SD_FINISHED_RELEASECOMMAND)
if ((cleaning_buffer_counter == 1) && (SD_FINISHED_STEPPERRELEASE)) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
#endif
......@@ -438,7 +438,7 @@ ISR(TIMER1_COMPA_vect) {
// If there is no current block, attempt to pop one from the buffer
if (!current_block) {
// Anything in the buffer?
current_block = plan_get_current_block();
current_block = planner.get_current_block();
if (current_block) {
current_block->busy = true;
trapezoid_generator_reset();
......@@ -651,12 +651,6 @@ ISR(TIMER1_COMPA_vect) {
#endif
#endif // LASERBEAM
// safe check for erroneous calculated events count
if(current_block->step_event_count >= MAX_EVENTS_COUNT) {
kill_current_block();
break;
}
step_events_completed++;
if (step_events_completed >= current_block->step_event_count) break;
}
......@@ -710,7 +704,6 @@ ISR(TIMER1_COMPA_vect) {
if (step_rate <= acc_step_rate) {
step_rate = acc_step_rate - step_rate; // Decelerate from acceleration end point.
// lower limit
NOLESS(step_rate, current_block->final_rate);
}
else {
......@@ -763,7 +756,7 @@ ISR(TIMER1_COMPA_vect) {
// If current block is finished, reset pointer
if (step_events_completed >= current_block->step_event_count) {
current_block = NULL;
plan_discard_current_block();
planner.discard_current_block();
#if ENABLED(LASERBEAM) && ENABLED(LASER_PULSE_METHOD)
if (current_block->laser_mode == CONTINUOUS && current_block->laser_status == LASER_ON)
laser_extinguish();
......@@ -1043,7 +1036,7 @@ void st_init() {
/**
* Block until all buffered steps are executed
*/
void st_synchronize() { while (blocks_queued()) idle(); }
void st_synchronize() { while (planner.blocks_queued()) idle(); }
/**
* Set the stepper positions directly in steps
......@@ -1119,7 +1112,7 @@ float st_get_axis_position_mm(AxisEnum axis) {
axis_pos = st_get_position(axis);
#endif
return axis_pos / axis_steps_per_unit[axis];
return axis_pos / planner.axis_steps_per_unit[axis];
}
void enable_all_steppers() {
......@@ -1150,7 +1143,7 @@ void finishAndDisableSteppers() {
void quickStop() {
cleaning_buffer_counter = 5000;
DISABLE_STEPPER_DRIVER_INTERRUPT();
while (blocks_queued()) plan_discard_current_block();
while (planner.blocks_queued()) planner.discard_current_block();
current_block = NULL;
ENABLE_STEPPER_DRIVER_INTERRUPT();
}
......@@ -1217,7 +1210,7 @@ void kill_current_block() {
}
float triggered_position_mm(AxisEnum axis) {
return endstops_trigsteps[axis] / axis_steps_per_unit[axis];
return endstops_trigsteps[axis] / planner.axis_steps_per_unit[axis];
}
bool motor_direction(AxisEnum axis) { return TEST(last_direction_bits, axis); }
......@@ -1456,7 +1449,7 @@ void microstep_readings() {
}
#if ENABLED(Z_DUAL_ENDSTOPS)
void In_Homing_Process(bool state) { performing_homing = state; }
void Lock_z_motor(bool state) { locked_z_motor = state; }
void Lock_z2_motor(bool state) { locked_z2_motor = state; }
void set_homing_flag(bool state) { performing_homing = state; }
void set_z_lock(bool state) { locked_z_motor = state; }
void set_z2_lock(bool state) { locked_z2_motor = state; }
#endif
MK/module/motion/stepper.h
View file @ 691547bd
......@@ -22,6 +22,22 @@
/**
* stepper.h - stepper motor driver: executes motion plans of planner.c using the stepper motors
* Part of Grbl
*
* Copyright (c) 2009-2011 Simen Svale Skogsrud
*
* Grbl is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Grbl is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef STEPPER_H
......@@ -107,9 +123,9 @@
void kill_current_block();
#if ENABLED(Z_DUAL_ENDSTOPS)
void In_Homing_Process(bool state);
void Lock_z_motor(bool state);
void Lock_z2_motor(bool state);
void set_homing_flag(bool state);
void set_z_lock(bool state);
void set_z2_lock(bool state);
#endif
#if ENABLED(BABYSTEPPING)
......
MK/module/motion/stepper_indirection.h
View file @ 691547bd
......@@ -45,17 +45,19 @@
#define X_ENABLE_READ READ(X_ENABLE_PIN)
// X2 motor
#define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN)
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
#define X2_STEP_READ READ(X2_STEP_PIN)
#if ENABLED(DUAL_X_CARRIAGE)
#define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN)
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
#define X2_STEP_READ READ(X2_STEP_PIN)
#define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN)
#define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE)
#define X2_DIR_READ READ(X_DIR_PIN)
#define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN)
#define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE)
#define X2_DIR_READ READ(X_DIR_PIN)
#define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
#define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE)
#define X2_ENABLE_READ READ(X_ENABLE_PIN)
#define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN)
#define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE)
#define X2_ENABLE_READ READ(X_ENABLE_PIN)
#endif // DUAL_X_CARRIAGE
// Y motor
#define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN)
......@@ -71,17 +73,19 @@
#define Y_ENABLE_READ READ(Y_ENABLE_PIN)
// Y2 motor
#define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN)
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
#define Y2_STEP_READ READ(Y2_STEP_PIN)
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
#define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN)
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
#define Y2_STEP_READ READ(Y2_STEP_PIN)
#define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN)
#define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE)
#define Y2_DIR_READ READ(Y2_DIR_PIN)
#define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN)
#define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE)
#define Y2_DIR_READ READ(Y2_DIR_PIN)
#define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
#define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE)
#define Y2_ENABLE_READ READ(Y2_ENABLE_PIN)
#define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN)
#define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE)
#define Y2_ENABLE_READ READ(Y2_ENABLE_PIN)
#endif // Y_DUAL_STEPPER_DRIVERS
// Z motor
#define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN)
......@@ -97,17 +101,19 @@
#define Z_ENABLE_READ READ(Z_ENABLE_PIN)
// Z2 motor
#define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN)
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
#define Z2_STEP_READ READ(Z2_STEP_PIN)
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN)
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
#define Z2_STEP_READ READ(Z2_STEP_PIN)
#define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN)
#define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE)
#define Z2_DIR_READ READ(Z2_DIR_PIN)
#define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN)
#define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE)
#define Z2_DIR_READ READ(Z2_DIR_PIN)
#define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
#define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE)
#define Z2_ENABLE_READ READ(Z2_ENABLE_PIN)
#define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN)
#define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE)
#define Z2_ENABLE_READ READ(Z2_ENABLE_PIN)
#endif // Z_DUAL_STEPPER_DRIVERS
// E0 motor
#define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN)
......@@ -374,11 +380,11 @@
// TMC26X drivers have step and dir on normal pins, but everything else via SPI
//////////////////////////////////
#if ENABLED(HAVE_TMCDRIVER)
#include <SPI.h>
#include <TMC26XStepper.h>
#include <SPI.h>
#include <TMC26XStepper.h>
void tmc_init();
#if ENABLED(X_IS_TMC)
#if ENABLED(X_IS_TMC)
extern TMC26XStepper stepperX;
#undef X_ENABLE_INIT
#define X_ENABLE_INIT ((void)0)
......@@ -389,8 +395,8 @@
#undef X_ENABLE_READ
#define X_ENABLE_READ stepperX.isEnabled()
#endif
#if ENABLED(X2_IS_TMC)
#endif
#if ENABLED(X2_IS_TMC)
extern TMC26XStepper stepperX2;
#undef X2_ENABLE_INIT
#define X2_ENABLE_INIT ((void)0)
......@@ -400,8 +406,8 @@
#undef X2_ENABLE_READ
#define X2_ENABLE_READ stepperX2.isEnabled()
#endif
#if ENABLED(Y_IS_TMC)
#endif
#if ENABLED(Y_IS_TMC)
extern TMC26XStepper stepperY;
#undef Y_ENABLE_INIT
#define Y_ENABLE_INIT ((void)0)
......@@ -411,8 +417,8 @@
#undef Y_ENABLE_READ
#define Y_ENABLE_READ stepperY.isEnabled()
#endif
#if ENABLED(Y2_IS_TMC)
#endif
#if ENABLED(Y2_IS_TMC)
extern TMC26XStepper stepperY2;
#undef Y2_ENABLE_INIT
#define Y2_ENABLE_INIT ((void)0)
......@@ -422,8 +428,8 @@
#undef Y2_ENABLE_READ
#define Y2_ENABLE_READ stepperY2.isEnabled()
#endif
#if ENABLED(Z_IS_TMC)
#endif
#if ENABLED(Z_IS_TMC)
extern TMC26XStepper stepperZ;
#undef Z_ENABLE_INIT
#define Z_ENABLE_INIT ((void)0)
......@@ -433,8 +439,8 @@
#undef Z_ENABLE_READ
#define Z_ENABLE_READ stepperZ.isEnabled()
#endif
#if ENABLED(Z2_IS_TMC)
#endif
#if ENABLED(Z2_IS_TMC)
extern TMC26XStepper stepperZ2;
#undef Z2_ENABLE_INIT
#define Z2_ENABLE_INIT ((void)0)
......@@ -444,8 +450,8 @@
#undef Z2_ENABLE_READ
#define Z2_ENABLE_READ stepperZ2.isEnabled()
#endif
#if ENABLED(E0_IS_TMC)
#endif
#if ENABLED(E0_IS_TMC)
extern TMC26XStepper stepperE0;
#undef E0_ENABLE_INIT
#define E0_ENABLE_INIT ((void)0)
......@@ -455,8 +461,8 @@
#undef E0_ENABLE_READ
#define E0_ENABLE_READ stepperE0.isEnabled()
#endif
#if ENABLED(E1_IS_TMC)
#endif
#if ENABLED(E1_IS_TMC)
extern TMC26XStepper stepperE1;
#undef E1_ENABLE_INIT
#define E1_ENABLE_INIT ((void)0)
......@@ -466,8 +472,8 @@
#undef E1_ENABLE_READ
#define E1_ENABLE_READ stepperE1.isEnabled()
#endif
#if ENABLED(E2_IS_TMC)
#endif
#if ENABLED(E2_IS_TMC)
extern TMC26XStepper stepperE2;
#undef E2_ENABLE_INIT
#define E2_ENABLE_INIT ((void)0)
......@@ -477,8 +483,8 @@
#undef E2_ENABLE_READ
#define E2_ENABLE_READ stepperE2.isEnabled()
#endif
#if ENABLED(E3_IS_TMC)
#endif
#if ENABLED(E3_IS_TMC)
extern TMC26XStepper stepperE3;
#undef E3_ENABLE_INIT
#define E3_ENABLE_INIT ((void)0)
......@@ -488,7 +494,7 @@
#undef E3_ENABLE_READ
#define E3_ENABLE_READ stepperE3.isEnabled()
#endif
#endif
#endif // HAVE_TMCDRIVER
......@@ -498,11 +504,11 @@
//////////////////////////////////
#if ENABLED(HAVE_L6470DRIVER)
#include <SPI.h>
#include <L6470.h>
#include <SPI.h>
#include <L6470.h>
void L6470_init();
#if ENABLED(X_IS_L6470)
#if ENABLED(X_IS_L6470)
extern L6470 stepperX;
#undef X_ENABLE_INIT
#define X_ENABLE_INIT ((void)0)
......@@ -522,8 +528,8 @@
#undef X_DIR_READ
#define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
#endif
#if ENABLED(X2_IS_L6470)
#endif
#if ENABLED(X2_IS_L6470)
extern L6470 stepperX2;
#undef X2_ENABLE_INIT
#define X2_ENABLE_INIT ((void)0)
......@@ -542,8 +548,8 @@
#undef X2_DIR_READ
#define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
#endif
#if ENABLED(Y_IS_L6470)
#endif
#if ENABLED(Y_IS_L6470)
extern L6470 stepperY;
#undef Y_ENABLE_INIT
#define Y_ENABLE_INIT ((void)0)
......@@ -562,8 +568,8 @@
#undef Y_DIR_READ
#define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
#endif
#if ENABLED(Y2_IS_L6470)
#endif
#if ENABLED(Y2_IS_L6470)
extern L6470 stepperY2;
#undef Y2_ENABLE_INIT
#define Y2_ENABLE_INIT ((void)0)
......@@ -582,8 +588,8 @@
#undef Y2_DIR_READ
#define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
#endif
#if ENABLED(Z_IS_L6470)
#endif
#if ENABLED(Z_IS_L6470)
extern L6470 stepperZ;
#undef Z_ENABLE_INIT
#define Z_ENABLE_INIT ((void)0)
......@@ -602,8 +608,8 @@
#undef Y_DIR_READ
#define Y_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
#endif
#if ENABLED(Z2_IS_L6470)
#endif
#if ENABLED(Z2_IS_L6470)
extern L6470 stepperZ2;
#undef Z2_ENABLE_INIT
#define Z2_ENABLE_INIT ((void)0)
......@@ -622,8 +628,8 @@
#undef Y2_DIR_READ
#define Y2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
#endif
#if ENABLED(E0_IS_L6470)
#endif
#if ENABLED(E0_IS_L6470)
extern L6470 stepperE0;
#undef E0_ENABLE_INIT
#define E0_ENABLE_INIT ((void)0)
......@@ -642,8 +648,8 @@
#undef E0_DIR_READ
#define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
#endif
#if ENABLED(E1_IS_L6470)
#endif
#if ENABLED(E1_IS_L6470)
extern L6470 stepperE1;
#undef E1_ENABLE_INIT
#define E1_ENABLE_INIT ((void)0)
......@@ -662,8 +668,8 @@
#undef E1_DIR_READ
#define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
#endif
#if ENABLED(E2_IS_L6470)
#endif
#if ENABLED(E2_IS_L6470)
extern L6470 stepperE2;
#undef E2_ENABLE_INIT
#define E2_ENABLE_INIT ((void)0)
......@@ -682,8 +688,8 @@
#undef E2_DIR_READ
#define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
#endif
#if ENABLED(E3_IS_L6470)
#endif
#if ENABLED(E3_IS_L6470)
extern L6470 stepperE3;
#undef E3_ENABLE_INIT
#define E3_ENABLE_INIT ((void)0)
......@@ -702,7 +708,7 @@
#undef E3_DIR_READ
#define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR)
#endif
#endif
#endif //HAVE_L6470DRIVER
......
MK/module/motion/vector_3.cpp deleted 100644 → 0
View file @ 09ccdb59
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* vector_3.cpp - Vector library for bed leveling
* Copyright (c) 2012 Lars Brubaker. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "../../base.h"
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#include <math.h>
#include "vector_3.h"
vector_3::vector_3() : x(0), y(0), z(0) { }
vector_3::vector_3(float x_, float y_, float z_) : x(x_), y(y_), z(z_) { }
vector_3 vector_3::cross(vector_3 left, vector_3 right) {
return vector_3(left.y * right.z - left.z * right.y,
left.z * right.x - left.x * right.z,
left.x * right.y - left.y * right.x);
}
vector_3 vector_3::operator+(vector_3 v) { return vector_3((x + v.x), (y + v.y), (z + v.z)); }
vector_3 vector_3::operator-(vector_3 v) { return vector_3((x - v.x), (y - v.y), (z - v.z)); }
vector_3 vector_3::get_normal() {
vector_3 normalized = vector_3(x, y, z);
normalized.normalize();
return normalized;
}
float vector_3::get_length() { return sqrt((x * x) + (y * y) + (z * z)); }
void vector_3::normalize() {
float length = get_length();
x /= length;
y /= length;
z /= length;
}
void vector_3::apply_rotation(matrix_3x3 matrix) {
float resultX = x * matrix.matrix[0][0] + y * matrix.matrix[1][0] + z * matrix.matrix[2][0];
float resultY = x * matrix.matrix[0][1] + y * matrix.matrix[1][1] + z * matrix.matrix[2][1];
float resultZ = x * matrix.matrix[0][2] + y * matrix.matrix[1][2] + z * matrix.matrix[2][2];
x = resultX;
y = resultY;
z = resultZ;
}
void vector_3::debug(const char title[]) {
ECHO_ST(DB, title);
ECHO_MV(" x: ", x, 6);
ECHO_MV(" y: ", y, 6);
ECHO_EMV(" z: ", z, 6);
}
void apply_rotation_xyz(matrix_3x3 matrix, float& x, float& y, float& z) {
vector_3 vector = vector_3(x, y, z);
vector.apply_rotation(matrix);
x = vector.x;
y = vector.y;
z = vector.z;
}
matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2) {
//row_0.debug("row_0");
//row_1.debug("row_1");
//row_2.debug("row_2");
matrix_3x3 new_matrix;
new_matrix.matrix[0][0] = row_0.x; new_matrix.matrix[0][1] = row_0.y; new_matrix.matrix[0][2] = row_0.z;
new_matrix.matrix[1][0] = row_1.x; new_matrix.matrix[1][1] = row_1.y; new_matrix.matrix[1][2] = row_1.z;
new_matrix.matrix[2][0] = row_2.x; new_matrix.matrix[2][1] = row_2.y; new_matrix.matrix[2][2] = row_2.z;
//new_matrix.debug("new_matrix");
return new_matrix;
}
void matrix_3x3::set_to_identity() {
matrix[0][0] = 1; matrix[0][1] = 0; matrix[0][2] = 0;
matrix[1][0] = 0; matrix[1][1] = 1; matrix[1][2] = 0;
matrix[2][0] = 0; matrix[2][1] = 0; matrix[2][2] = 1;
}
matrix_3x3 matrix_3x3::create_look_at(vector_3 target) {
vector_3 z_row = target.get_normal();
vector_3 x_row = vector_3(1, 0, -target.x / target.z).get_normal();
vector_3 y_row = vector_3::cross(z_row, x_row).get_normal();
// x_row.debug("x_row");
// y_row.debug("y_row");
// z_row.debug("z_row");
// create the matrix already correctly transposed
matrix_3x3 rot = matrix_3x3::create_from_rows(x_row, y_row, z_row);
// rot.debug("rot");
return rot;
}
matrix_3x3 matrix_3x3::transpose(matrix_3x3 original) {
matrix_3x3 new_matrix;
new_matrix.matrix[0][0] = original.matrix[0][0]; new_matrix.matrix[0][1] = original.matrix[1][0]; new_matrix.matrix[0][2] = original.matrix[2][0];
new_matrix.matrix[1][0] = original.matrix[0][1]; new_matrix.matrix[1][1] = original.matrix[1][1]; new_matrix.matrix[1][2] = original.matrix[2][1];
new_matrix.matrix[2][0] = original.matrix[0][2]; new_matrix.matrix[2][1] = original.matrix[1][2]; new_matrix.matrix[2][2] = original.matrix[2][2];
return new_matrix;
}
void matrix_3x3::debug(const char title[]) {
ECHO_LT(DB, title);
for (uint8_t i = 0; i < 3; i++) {
ECHO_S(DB);
for (uint8_t j = 0; j < 3; j++) {
if (matrix[i][j] >= 0.0) ECHO_C('+');
ECHO_V(matrix[i][j], 6);
ECHO_C(' ');
}
ECHO_E;
}
}
#endif // AUTO_BED_LEVELING_FEATURE
MK/module/planner/qr_solve.cpp 0 → 100644
View file @ 691547bd
This diff is collapsed.
MK/module/motion/qr_solve.h → MK/module/planner/qr_solve.h
View file @ 691547bd
......@@ -20,23 +20,31 @@
*
*/
#include "../../base.h"
#ifndef QR_SOLVE_H
#define QR_SOLVE_H
#if ENABLED(AUTO_BED_LEVELING_GRID)
void daxpy(int n, double da, double dx[], int incx, double dy[], int incy);
double ddot(int n, double dx[], int incx, double dy[], int incy);
double dnrm2(int n, double x[], int incx);
void dqrank(double a[], int lda, int m, int n, double tol, int* kr,
void daxpy(int n, double da, double dx[], int incx, double dy[], int incy);
double ddot(int n, double dx[], int incx, double dy[], int incy);
double dnrm2(int n, double x[], int incx);
void dqrank(double a[], int lda, int m, int n, double tol, int* kr,
int jpvt[], double qraux[]);
void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[],
void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[],
double work[], int job);
int dqrls(double a[], int lda, int m, int n, double tol, int* kr, double b[],
int dqrls(double a[], int lda, int m, int n, double tol, int* kr, double b[],
double x[], double rsd[], int jpvt[], double qraux[], int itask);
void dqrlss(double a[], int lda, int m, int n, int kr, double b[], double x[],
void dqrlss(double a[], int lda, int m, int n, int kr, double b[], double x[],
double rsd[], int jpvt[], double qraux[]);
int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[],
int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[],
double qy[], double qty[], double b[], double rsd[], double ab[], int job);
void dscal(int n, double sa, double x[], int incx);
void dswap(int n, double x[], int incx, double y[], int incy);
void qr_solve(double x[], int m, int n, double a[], double b[]);
void dscal(int n, double sa, double x[], int incx);
void dswap(int n, double x[], int incx, double y[], int incy);
void qr_solve(double x[], int m, int n, double a[], double b[]);
#endif // ENABLED(AUTO_BED_LEVELING_GRID)
#endif // QR_SOLVE_H
#endif
MK/module/planner/vector_3.cpp 0 → 100644
View file @ 691547bd
/**
* MK & MK4due 3D Printer Firmware
*
* Based on Marlin, Sprinter and grbl
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* vector_3.cpp - Vector library for bed leveling
* Copyright (c) 2012 Lars Brubaker. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "../../base.h"
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#include <math.h>
#include "vector_3.h"
vector_3::vector_3() : x(0), y(0), z(0) { }
vector_3::vector_3(float x_, float y_, float z_) : x(x_), y(y_), z(z_) { }
vector_3 vector_3::cross(vector_3 left, vector_3 right) {
return vector_3(left.y * right.z - left.z * right.y,
left.z * right.x - left.x * right.z,
left.x * right.y - left.y * right.x);
}
vector_3 vector_3::operator+(vector_3 v) { return vector_3((x + v.x), (y + v.y), (z + v.z)); }
vector_3 vector_3::operator-(vector_3 v) { return vector_3((x - v.x), (y - v.y), (z - v.z)); }
vector_3 vector_3::get_normal() {
vector_3 normalized = vector_3(x, y, z);
normalized.normalize();
return normalized;
}
float vector_3::get_length() { return sqrt((x * x) + (y * y) + (z * z)); }
void vector_3::normalize() {
float length = get_length();
x /= length;
y /= length;
z /= length;
}
void vector_3::apply_rotation(matrix_3x3 matrix) {
float resultX = x * matrix.matrix[3 * 0 + 0] + y * matrix.matrix[3 * 1 + 0] + z * matrix.matrix[3 * 2 + 0];
float resultY = x * matrix.matrix[3 * 0 + 1] + y * matrix.matrix[3 * 1 + 1] + z * matrix.matrix[3 * 2 + 1];
float resultZ = x * matrix.matrix[3 * 0 + 2] + y * matrix.matrix[3 * 1 + 2] + z * matrix.matrix[3 * 2 + 2];
x = resultX;
y = resultY;
z = resultZ;
}
void vector_3::debug(const char title[]) {
ECHO_ST(DB, title);
ECHO_MV(" x: ", x, 6);
ECHO_MV(" y: ", y, 6);
ECHO_EMV(" z: ", z, 6);
}
void apply_rotation_xyz(matrix_3x3 matrix, float& x, float& y, float& z) {
vector_3 vector = vector_3(x, y, z);
vector.apply_rotation(matrix);
x = vector.x;
y = vector.y;
z = vector.z;
}
matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2) {
//row_0.debug("row_0");
//row_1.debug("row_1");
//row_2.debug("row_2");
matrix_3x3 new_matrix;
new_matrix.matrix[0] = row_0.x; new_matrix.matrix[1] = row_0.y; new_matrix.matrix[2] = row_0.z;
new_matrix.matrix[3] = row_1.x; new_matrix.matrix[4] = row_1.y; new_matrix.matrix[5] = row_1.z;
new_matrix.matrix[6] = row_2.x; new_matrix.matrix[7] = row_2.y; new_matrix.matrix[8] = row_2.z;
//new_matrix.debug("new_matrix");
return new_matrix;
}
void matrix_3x3::set_to_identity() {
matrix[0] = 1; matrix[1] = 0; matrix[2] = 0;
matrix[3] = 0; matrix[4] = 1; matrix[5] = 0;
matrix[6] = 0; matrix[7] = 0; matrix[8] = 1;
}
matrix_3x3 matrix_3x3::create_look_at(vector_3 target) {
vector_3 z_row = target.get_normal();
vector_3 x_row = vector_3(1, 0, -target.x / target.z).get_normal();
vector_3 y_row = vector_3::cross(z_row, x_row).get_normal();
// x_row.debug("x_row");
// y_row.debug("y_row");
// z_row.debug("z_row");
// create the matrix already correctly transposed
matrix_3x3 rot = matrix_3x3::create_from_rows(x_row, y_row, z_row);
// rot.debug("rot");
return rot;
}
matrix_3x3 matrix_3x3::transpose(matrix_3x3 original) {
matrix_3x3 new_matrix;
new_matrix.matrix[0] = original.matrix[0]; new_matrix.matrix[1] = original.matrix[3]; new_matrix.matrix[2] = original.matrix[6];
new_matrix.matrix[3] = original.matrix[1]; new_matrix.matrix[4] = original.matrix[4]; new_matrix.matrix[5] = original.matrix[7];
new_matrix.matrix[6] = original.matrix[2]; new_matrix.matrix[7] = original.matrix[5]; new_matrix.matrix[8] = original.matrix[8];
return new_matrix;
}
void matrix_3x3::debug(const char title[]) {
ECHO_LT(DB, title);
int count = 0;
for (int i = 0; i < 3; i++) {
for (int j = 0; j < 3; j++) {
if (matrix[count] >= 0.0) ECHO_C('+');
ECHO_V(matrix[count], 6);
ECHO_C(' ');
count++;
}
ECHO_E;
}
}
#endif // AUTO_BED_LEVELING_FEATURE
MK/module/motion/vector_3.h → MK/module/planner/vector_3.h
View file @ 691547bd
......@@ -40,12 +40,12 @@
*/
#ifndef VECTOR_3_H
#define VECTOR_3_H
#define VECTOR_3_H
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
class matrix_3x3;
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
class matrix_3x3;
struct vector_3 {
struct vector_3 {
float x, y, z;
vector_3();
......@@ -62,20 +62,22 @@
void debug(const char title[]);
void apply_rotation(matrix_3x3 matrix);
};
};
struct matrix_3x3 {
float matrix[3][3];
struct matrix_3x3 {
float matrix[9];
static matrix_3x3 create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2);
static matrix_3x3 create_look_at(vector_3 target);
static matrix_3x3 transpose(matrix_3x3 original);
void set_to_identity();
void debug(const char title[]);
};
};
void apply_rotation_xyz(matrix_3x3 rotationMatrix, float& x, float& y, float& z);
void apply_rotation_xyz(matrix_3x3 rotationMatrix, float& x, float& y, float& z);
#endif // AUTO_BED_LEVELING_FEATURE
#endif // AUTO_BED_LEVELING_FEATURE
#endif // VECTOR_3_H
MK/module/sanitycheck.h
View file @ 691547bd
......@@ -588,9 +588,6 @@
#if DISABLED(Z_PROBE_OFFSET_FROM_EXTRUDER)
#error DEPENDENCY ERROR: Missing setting Z_PROBE_OFFSET_FROM_EXTRUDER
#endif
#if DISABLED(Z_RAISE_BEFORE_HOMING)
#error DEPENDENCY ERROR: Missing setting Z_RAISE_BEFORE_HOMING
#endif
#if DISABLED(Z_RAISE_BEFORE_PROBING)
#error DEPENDENCY ERROR: Missing setting Z_RAISE_BEFORE_PROBING
#endif
......@@ -1627,8 +1624,8 @@
#if Z_ENDSTOP_SERVO_NR < 0
#error DEPENDENCY ERROR: You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_PROBE_ENDSTOP.
#endif
#if DISABLED(SERVO_ENDSTOP_ANGLES)
#error DEPENDENCY ERROR: You must have SERVO_ENDSTOP_ANGLES EXIST for Z Extend and Retract to use Z_PROBE_ENDSTOP.
#if DISABLED(Z_ENDSTOP_SERVO_ANGLES)
#error DEPENDENCY ERROR: You must have Z_ENDSTOP_SERVO_ANGLES EXIST for Z Extend and Retract to use Z_PROBE_ENDSTOP.
#endif
#endif
#endif
......
MK/module/temperature/temperature.cpp
View file @ 691547bd
This diff is collapsed.
MK/module/temperature/temperature.h
View file @ 691547bd
......@@ -199,6 +199,12 @@ FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_tempe
FORCE_INLINE bool isCoolingChamber() { return target_temperature_chamber < current_temperature_chamber; }
FORCE_INLINE bool isCoolingCooler() { return target_temperature_cooler < current_temperature_cooler; }
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
FORCE_INLINE bool tooColdToHotend(uint8_t h) { return degHotend(h) < extrude_min_temp; }
#else
FORCE_INLINE bool tooColdToHotend(uint8_t h) { UNUSED(h); return false; }
#endif
#define HOTEND_ROUTINES(NR) \
FORCE_INLINE float degHotend##NR() { return degHotend(NR); } \
FORCE_INLINE float degTargetHotend##NR() { return degTargetHotend(NR); } \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment