Skip to content

M
MarlinKimbra
Commit 5729de2f authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Fix problem width CURA

parent ac418efe
Show whitespace changes
Inline Side-by-side
Showing with 118 additions and 92 deletions
MarlinKimbra/Marlin_main.cpp
View file @ 5729de2f
...@@ -1029,7 +1029,7 @@ long code_value_long() { return strtol(seen_pointer + 1, NULL, 10); } ...@@ -1029,7 +1029,7 @@ long code_value_long() { return strtol(seen_pointer + 1, NULL, 10); }
int16_t code_value_short() { return (int16_t)strtol(seen_pointer + 1, NULL, 10); } int16_t code_value_short() { return (int16_t)strtol(seen_pointer + 1, NULL, 10); }
bool code_seen(char code) { bool code_seen(char code) {
seen_pointer = strchr(command_queue[cmd_queue_index_r], code); seen_pointer = strchr(current_command_args, code); // +3 since "G0 " is the shortest prefix
return (seen_pointer != NULL); //Return True if a character was found return (seen_pointer != NULL); //Return True if a character was found
} }
...@@ -2525,10 +2525,10 @@ inline void wait_heater() { ...@@ -2525,10 +2525,10 @@ inline void wait_heater() {
{ // while loop { // while loop
if (millis() > temp_ms + 1000UL) { //Print temp & remaining time every 1s while waiting if (millis() > temp_ms + 1000UL) { //Print temp & remaining time every 1s while waiting
ECHO_MV("T:", degHotend(target_extruder), 1); ECHO_MV(MSG_T, degHotend(target_extruder), 1);
ECHO_MV(" E:", (int)target_extruder); ECHO_MV(" E:", (int)target_extruder);
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
ECHO_M(" W:"); ECHO_M(" " MSG_W);
if (residency_start_ms > -1) { if (residency_start_ms > -1) {
temp_ms = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residency_start_ms)) / 1000UL; temp_ms = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residency_start_ms)) / 1000UL;
ECHO_EV(temp_ms); ECHO_EV(temp_ms);
...@@ -2572,13 +2572,11 @@ inline void wait_bed() { ...@@ -2572,13 +2572,11 @@ inline void wait_bed() {
if (ms > temp_ms + 1000UL) { //Print Temp Reading every 1 second while heating up. if (ms > temp_ms + 1000UL) { //Print Temp Reading every 1 second while heating up.
temp_ms = ms; temp_ms = ms;
float tt = degHotend(active_extruder); float tt = degHotend(active_extruder);
ECHO_MV("T:", tt); ECHO_MV(MSG_T, tt);
ECHO_MV(" E:", active_extruder); ECHO_MV(" E:", active_extruder);
ECHO_EMV(" B:", degBed(), 1); ECHO_EMV(" " MSG_B, degBed(), 1);
} }
manage_heater(); idle();
manage_inactivity();
lcd_update();
} }
LCD_MESSAGEPGM(MSG_BED_DONE); LCD_MESSAGEPGM(MSG_BED_DONE);
refresh_cmd_timeout(); refresh_cmd_timeout();
...@@ -2851,7 +2849,7 @@ inline void gcode_G4() { ...@@ -2851,7 +2849,7 @@ inline void gcode_G4() {
* Z Home to the Z endstop * Z Home to the Z endstop
* *
*/ */
inline void gcode_G28(boolean home_XY = false) { inline void gcode_G28() {
// Wait for planner moves to finish! // Wait for planner moves to finish!
st_synchronize(); st_synchronize();
...@@ -2867,10 +2865,10 @@ inline void gcode_G28(boolean home_XY = false) { ...@@ -2867,10 +2865,10 @@ inline void gcode_G28(boolean home_XY = false) {
feedrate = 0.0; feedrate = 0.0;
bool homeX = code_seen(axis_codes[X_AXIS]) || home_XY, bool homeX = code_seen(axis_codes[X_AXIS]),
homeY = code_seen(axis_codes[Y_AXIS]) || home_XY, homeY = code_seen(axis_codes[Y_AXIS]),
homeZ = code_seen(axis_codes[Z_AXIS]) && !home_XY, homeZ = code_seen(axis_codes[Z_AXIS]),
homeE = code_seen(axis_codes[E_AXIS]) && !home_XY; homeE = code_seen(axis_codes[E_AXIS]);
home_all_axis = (!homeX && !homeY && !homeZ && !homeE) || (homeX && homeY && homeZ); home_all_axis = (!homeX && !homeY && !homeZ && !homeE) || (homeX && homeY && homeZ);
...@@ -3812,10 +3810,7 @@ inline void gcode_M17() { ...@@ -3812,10 +3810,7 @@ inline void gcode_M17() {
* M23: Select a file * M23: Select a file
*/ */
inline void gcode_M23() { inline void gcode_M23() {
char* codepos = seen_pointer + 4; card.openFile(current_command_args, true);
char* starpos = strchr(codepos, '*');
if (starpos) *starpos = '\0';
card.openFile(codepos, true);
} }
/** /**
...@@ -3855,14 +3850,7 @@ inline void gcode_M17() { ...@@ -3855,14 +3850,7 @@ inline void gcode_M17() {
* M28: Start SD Write * M28: Start SD Write
*/ */
inline void gcode_M28() { inline void gcode_M28() {
char* codepos = seen_pointer + 4; card.openFile(current_command_args, false);
char* starpos = strchr(codepos, '*');
if (starpos) {
char* npos = strchr(command_queue[cmd_queue_index_r], 'N');
seen_pointer = strchr(npos, ' ') + 1;
*(starpos) = '\0';
}
card.openFile(codepos, false);
} }
/** /**
...@@ -3879,13 +3867,7 @@ inline void gcode_M17() { ...@@ -3879,13 +3867,7 @@ inline void gcode_M17() {
inline void gcode_M30() { inline void gcode_M30() {
if (card.cardOK) { if (card.cardOK) {
card.closeFile(); card.closeFile();
char* starpos = strchr(seen_pointer + 4, '*'); card.removeFile(current_command_args);
if (starpos) {
char* npos = strchr(command_queue[cmd_queue_index_r], 'N');
seen_pointer = strchr(npos, ' ') + 1;
*(starpos) = '\0';
}
card.removeFile(seen_pointer + 4);
} }
} }
#endif #endif
...@@ -3910,8 +3892,7 @@ inline void gcode_M31() { ...@@ -3910,8 +3892,7 @@ inline void gcode_M31() {
* M32: Select file and start SD Print * M32: Select file and start SD Print
*/ */
inline void gcode_M32() { inline void gcode_M32() {
if (card.sdprinting) if (card.sdprinting) st_synchronize();
st_synchronize();
char* namestartpos = strchr(current_command_args, '!'); // Find ! to indicate filename string start. char* namestartpos = strchr(current_command_args, '!'); // Find ! to indicate filename string start.
if (!namestartpos) if (!namestartpos)
...@@ -3957,13 +3938,7 @@ inline void gcode_M31() { ...@@ -3957,13 +3938,7 @@ inline void gcode_M31() {
* M928: Start SD Write * M928: Start SD Write
*/ */
inline void gcode_M928() { inline void gcode_M928() {
char* starpos = strchr(seen_pointer + 5, '*'); card.openLogFile(current_command_args);
if (starpos) {
char* npos = strchr(command_queue[cmd_queue_index_r], 'N');
seen_pointer = strchr(npos, ' ') + 1;
*(starpos) = '\0';
}
card.openLogFile(seen_pointer + 5);
} }
#endif // SDSUPPORT #endif // SDSUPPORT
...@@ -4347,9 +4322,11 @@ inline void gcode_M92() { ...@@ -4347,9 +4322,11 @@ inline void gcode_M92() {
inline void gcode_M104() { inline void gcode_M104() {
if (setTargetedHotend(104)) return; if (setTargetedHotend(104)) return;
if (debugLevel & DEBUG_DRYRUN) return; if (debugLevel & DEBUG_DRYRUN) return;
#if HOTENDS == 1 #if HOTENDS == 1
if (target_extruder != active_extruder) return; if (target_extruder != active_extruder) return;
#endif #endif
if (code_seen('S')) { if (code_seen('S')) {
float temp = code_value(); float temp = code_value();
setTargetHotend(temp, target_extruder); setTargetHotend(temp, target_extruder);
...@@ -4357,10 +4334,6 @@ inline void gcode_M104() { ...@@ -4357,10 +4334,6 @@ inline void gcode_M104() {
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0) if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset); setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset);
#endif #endif
#ifdef THERMAL_PROTECTION_HOTENDS
start_watching_heater(target_extruder);
#endif
} }
} }
...@@ -4387,17 +4360,16 @@ inline void gcode_M105() { ...@@ -4387,17 +4360,16 @@ inline void gcode_M105() {
} }
#else // !HAS_TEMP_0 && !HAS_TEMP_BED #else // !HAS_TEMP_0 && !HAS_TEMP_BED
ECHO_LM(ER, MSG_ERR_NO_THERMISTORS); ECHO_LM(ER, MSG_ERR_NO_THERMISTORS);
return;
#endif #endif
ECHO_M(" @:"); ECHO_M(" " MSG_AT);
#ifdef HOTEND_WATTS #ifdef HOTEND_WATTS
ECHO_VM((HOTEND_WATTS * getHeaterPower(target_extruder))/127, "W"); ECHO_VM((HOTEND_WATTS * getHeaterPower(target_extruder))/127, "W");
#else #else
ECHO_V(getHeaterPower(target_extruder)); ECHO_V(getHeaterPower(target_extruder));
#endif #endif
ECHO_M(" B@:"); ECHO_M(" " MSG_BAT);
#ifdef BED_WATTS #ifdef BED_WATTS
ECHO_VM((BED_WATTS * getHeaterPower(-1))/127, "W"); ECHO_VM((BED_WATTS * getHeaterPower(-1))/127, "W");
#else #else
...@@ -4406,10 +4378,10 @@ inline void gcode_M105() { ...@@ -4406,10 +4378,10 @@ inline void gcode_M105() {
#ifdef SHOW_TEMP_ADC_VALUES #ifdef SHOW_TEMP_ADC_VALUES
#if HAS_TEMP_BED #if HAS_TEMP_BED
ECHO_MV(" ADC B:", degBed(),1); ECHO_MV(" ADC B:", degBed(), 1);
ECHO_MV("C->", rawBedTemp()/OVERSAMPLENR,0); ECHO_MV("C->", rawBedTemp()/OVERSAMPLENR, 0);
#endif #endif
for (int8_t cur_extruder = 0; cur_extruder < HOTENDS; ++cur_extruder) { for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
ECHO_MV(" T", cur_extruder); ECHO_MV(" T", cur_extruder);
ECHO_MV(":", degHotend(cur_extruder),1); ECHO_MV(":", degHotend(cur_extruder),1);
ECHO_MV("C->", rawHotendTemp(cur_extruder)/OVERSAMPLENR,0); ECHO_MV("C->", rawHotendTemp(cur_extruder)/OVERSAMPLENR,0);
...@@ -4437,6 +4409,7 @@ inline void gcode_M105() { ...@@ -4437,6 +4409,7 @@ inline void gcode_M105() {
inline void gcode_M109() { inline void gcode_M109() {
if (setTargetedHotend(109)) return; if (setTargetedHotend(109)) return;
if (debugLevel & DEBUG_DRYRUN) return; if (debugLevel & DEBUG_DRYRUN) return;
#if HOTENDS == 1 #if HOTENDS == 1
if (target_extruder != active_extruder) return; if (target_extruder != active_extruder) return;
#endif #endif
...@@ -4468,6 +4441,7 @@ inline void gcode_M109() { ...@@ -4468,6 +4441,7 @@ inline void gcode_M109() {
*/ */
inline void gcode_M111() { inline void gcode_M111() {
debugLevel = code_seen('S') ? code_value_short() : DEBUG_INFO|DEBUG_COMMUNICATION; debugLevel = code_seen('S') ? code_value_short() : DEBUG_INFO|DEBUG_COMMUNICATION;
if (debugLevel & DEBUG_ECHO) ECHO_LM(DB, MSG_DEBUG_ECHO); if (debugLevel & DEBUG_ECHO) ECHO_LM(DB, MSG_DEBUG_ECHO);
//if (debugLevel & DEBUG_INFO) ECHO_LM(DB, MSG_DEBUG_INFO); //if (debugLevel & DEBUG_INFO) ECHO_LM(DB, MSG_DEBUG_INFO);
//if (debugLevel & DEBUG_ERRORS) ECHO_LM(DB, MSG_DEBUG_ERRORS); //if (debugLevel & DEBUG_ERRORS) ECHO_LM(DB, MSG_DEBUG_ERRORS);
...@@ -4490,7 +4464,7 @@ inline void gcode_M112() { kill(PSTR(MSG_KILLED)); } ...@@ -4490,7 +4464,7 @@ inline void gcode_M112() { kill(PSTR(MSG_KILLED)); }
*/ */
inline void gcode_M114() { inline void gcode_M114() {
//MESSAGE for Host //MESSAGE for Host
ECHO_SMV(OK, " X:", current_position[X_AXIS]); ECHO_SMV(OK, "X:", current_position[X_AXIS]);
ECHO_MV(" Y:", current_position[Y_AXIS]); ECHO_MV(" Y:", current_position[Y_AXIS]);
ECHO_MV(" Z:", current_position[Z_AXIS]); ECHO_MV(" Z:", current_position[Z_AXIS]);
ECHO_MV(" E:", current_position[E_AXIS]); ECHO_MV(" E:", current_position[E_AXIS]);
...@@ -4549,7 +4523,7 @@ inline void gcode_M115() { ...@@ -4549,7 +4523,7 @@ inline void gcode_M115() {
* M117: Set LCD Status Message * M117: Set LCD Status Message
*/ */
inline void gcode_M117() { inline void gcode_M117() {
lcd_setstatus(seen_pointer + 5); lcd_setstatus(current_command_args);
} }
#endif #endif
...@@ -4595,12 +4569,12 @@ inline void gcode_M119() { ...@@ -4595,12 +4569,12 @@ inline void gcode_M119() {
/** /**
* M120: Enable endstops * M120: Enable endstops
*/ */
inline void gcode_M120() { enable_endstops(false); } inline void gcode_M120() { enable_endstops(true); }
/** /**
* M121: Disable endstops * M121: Disable endstops
*/ */
inline void gcode_M121() { enable_endstops(true); } inline void gcode_M121() { enable_endstops(false); }
#ifdef BARICUDA #ifdef BARICUDA
#if HAS_HEATER_1 #if HAS_HEATER_1
...@@ -4727,6 +4701,7 @@ inline void gcode_M140() { ...@@ -4727,6 +4701,7 @@ inline void gcode_M140() {
*/ */
inline void gcode_M190() { inline void gcode_M190() {
if (debugLevel & DEBUG_DRYRUN) return; if (debugLevel & DEBUG_DRYRUN) return;
LCD_MESSAGEPGM(MSG_BED_HEATING); LCD_MESSAGEPGM(MSG_BED_HEATING);
no_wait_for_cooling = code_seen('S'); no_wait_for_cooling = code_seen('S');
if (no_wait_for_cooling || code_seen('R')) if (no_wait_for_cooling || code_seen('R'))
...@@ -4870,20 +4845,35 @@ inline void gcode_M206() { ...@@ -4870,20 +4845,35 @@ inline void gcode_M206() {
#ifdef FWRETRACT #ifdef FWRETRACT
/** /**
* M207: Set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop] * M207: Set firmware retraction values
*
* S[+mm] retract_length
* W[+mm] retract_length_swap (multi-extruder)
* F[mm/min] retract_feedrate
* Z[mm] retract_zlift
*/ */
inline void gcode_M207() { inline void gcode_M207() {
if (code_seen('S')) retract_length = code_value(); if (code_seen('S')) retract_length = code_value();
if (code_seen('F')) retract_feedrate = code_value() / 60; if (code_seen('F')) retract_feedrate = code_value() / 60;
if (code_seen('Z')) retract_zlift = code_value(); if (code_seen('Z')) retract_zlift = code_value();
#if EXTRUDERS > 1
if (code_seen('W')) retract_length_swap = code_value();
#endif
} }
/** /**
* M208: Set retract recover length S[positive mm surplus to the M207 S*] F[feedrate mm/min] * M208: Set firmware un-retraction values
*
* S[+mm] retract_recover_length (in addition to M207 S*)
* W[+mm] retract_recover_length_swap (multi-extruder)
* F[mm/min] retract_recover_feedrate
*/ */
inline void gcode_M208() { inline void gcode_M208() {
if (code_seen('S')) retract_recover_length = code_value(); if (code_seen('S')) retract_recover_length = code_value();
if (code_seen('F')) retract_recover_feedrate = code_value() / 60; if (code_seen('F')) retract_recover_feedrate = code_value() / 60;
#if EXTRUDERS > 1
if (code_seen('W')) retract_recover_length_swap = code_value();
#endif
} }
/** /**
...@@ -4901,8 +4891,7 @@ inline void gcode_M206() { ...@@ -4901,8 +4891,7 @@ inline void gcode_M206() {
autoretract_enabled = true; autoretract_enabled = true;
break; break;
default: default:
ECHO_SM(ER, MSG_UNKNOWN_COMMAND); unknown_command_error();
ECHO_EVM(command_queue[cmd_queue_index_r], "\"");
return; return;
} }
for (int i=0; i < EXTRUDERS; i++) retracted[i] = false; for (int i=0; i < EXTRUDERS; i++) retracted[i] = false;
...@@ -5036,7 +5025,7 @@ inline void gcode_M226() { ...@@ -5036,7 +5025,7 @@ inline void gcode_M226() {
} }
#endif // CHDK || PHOTOGRAPH_PIN #endif // CHDK || PHOTOGRAPH_PIN
#if defined(DOGLCD) && LCD_CONTRAST >= 0 #ifdef HAS_LCD_CONTRAST
/** /**
* M250: Read and optionally set the LCD contrast * M250: Read and optionally set the LCD contrast
*/ */
...@@ -5110,8 +5099,7 @@ inline void gcode_M226() { ...@@ -5110,8 +5099,7 @@ inline void gcode_M226() {
if (code_seen('D')) PID_PARAM(Kd, e) = scalePID_d(code_value()); if (code_seen('D')) PID_PARAM(Kd, e) = scalePID_d(code_value());
updatePID(); updatePID();
ECHO_S(DB); ECHO_SMV(OK, "e:", e);
ECHO_MV(" e:", e);
ECHO_MV(" p:", PID_PARAM(Kp, e)); ECHO_MV(" p:", PID_PARAM(Kp, e));
ECHO_MV(" i:", unscalePID_i(PID_PARAM(Ki, e))); ECHO_MV(" i:", unscalePID_i(PID_PARAM(Ki, e)));
ECHO_EMV(" d:", unscalePID_d(PID_PARAM(Kd, e))); ECHO_EMV(" d:", unscalePID_d(PID_PARAM(Kd, e)));
...@@ -5146,6 +5134,7 @@ inline void gcode_M303() { ...@@ -5146,6 +5134,7 @@ inline void gcode_M303() {
int c = code_seen('C') ? code_value_short() : 5; int c = code_seen('C') ? code_value_short() : 5;
float temp = code_seen('S') ? code_value() : (e < 0 ? 70.0 : 150.0); float temp = code_seen('S') ? code_value() : (e < 0 ? 70.0 : 150.0);
PID_autotune(temp, e, c); PID_autotune(temp, e, c);
// Suppress a line mismatch error
gcode_LastN += 1; gcode_LastN += 1;
FlushSerialRequestResend(); FlushSerialRequestResend();
} }
...@@ -5158,8 +5147,7 @@ inline void gcode_M303() { ...@@ -5158,8 +5147,7 @@ inline void gcode_M303() {
if (code_seen('D')) bedKd = scalePID_d(code_value()); if (code_seen('D')) bedKd = scalePID_d(code_value());
updatePID(); updatePID();
ECHO_S(DB); ECHO_SMV(OK, "p:", bedKp);
ECHO_MV(" p:", bedKp);
ECHO_MV(" i:", unscalePID_i(bedKi)); ECHO_MV(" i:", unscalePID_i(bedKi));
ECHO_EMV(" d:", unscalePID_d(bedKd)); ECHO_EMV(" d:", unscalePID_d(bedKd));
} }
...@@ -5168,9 +5156,9 @@ inline void gcode_M303() { ...@@ -5168,9 +5156,9 @@ inline void gcode_M303() {
#if HAS_MICROSTEPS #if HAS_MICROSTEPS
// M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
inline void gcode_M350() { inline void gcode_M350() {
if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value()); if(code_seen('S')) for(int i = 0; i <= 4; i++) microstep_mode(i, code_value());
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value()); for(int i = 0; i < NUM_AXIS; i++) if(code_seen(axis_codes[i])) microstep_mode(i, (uint8_t)code_value());
if(code_seen('B')) microstep_mode(4,code_value()); if(code_seen('B')) microstep_mode(4, code_value());
microstep_readings(); microstep_readings();
} }
...@@ -5181,11 +5169,11 @@ inline void gcode_M303() { ...@@ -5181,11 +5169,11 @@ inline void gcode_M303() {
inline void gcode_M351() { inline void gcode_M351() {
if (code_seen('S')) switch(code_value_short()) { if (code_seen('S')) switch(code_value_short()) {
case 1: case 1:
for(int i=0;i<NUM_AXIS;i++) if (code_seen(axis_codes[i])) microstep_ms(i, code_value(), -1); for(int i = 0; i < NUM_AXIS; i++) if (code_seen(axis_codes[i])) microstep_ms(i, code_value(), -1);
if (code_seen('B')) microstep_ms(4, code_value(), -1); if (code_seen('B')) microstep_ms(4, code_value(), -1);
break; break;
case 2: case 2:
for(int i=0;i<NUM_AXIS;i++) if (code_seen(axis_codes[i])) microstep_ms(i, -1, code_value()); for(int i = 0; i < NUM_AXIS; i++) if (code_seen(axis_codes[i])) microstep_ms(i, -1, code_value());
if (code_seen('B')) microstep_ms(4, -1, code_value()); if (code_seen('B')) microstep_ms(4, -1, code_value());
break; break;
} }
...@@ -6119,15 +6107,50 @@ inline void gcode_T(uint8_t tmp_extruder) { ...@@ -6119,15 +6107,50 @@ inline void gcode_T(uint8_t tmp_extruder) {
* This is called from the main loop() * This is called from the main loop()
*/ */
void process_next_command() { void process_next_command() {
current_command = command_queue[cmd_queue_index_r];
if ((debugLevel & DEBUG_ECHO)) { if ((debugLevel & DEBUG_ECHO)) {
ECHO_LV(DB, command_queue[cmd_queue_index_r]); ECHO_LV(DB, current_command);
}
// Sanitize the current command:
// - Skip leading spaces
// - Bypass N...
// - Overwrite * with nul to mark the end
while (*current_command == ' ') ++current_command;
if (*current_command == 'N' && current_command[1] >= '0' && current_command[1] <= '9') {
while (*current_command != ' ' && *current_command != 'G' && *current_command != 'M' && *current_command != 'T') ++current_command;
while (*current_command == ' ') ++current_command;
} }
char *starpos = strchr(current_command, '*'); // * should always be the last parameter
if (starpos) *starpos = '\0';
// Get the command code, which must be G, M, or T
char command_code = *current_command;
// The code must have a numeric value
bool code_is_good = (current_command[1] >= '0' && current_command[1] <= '9');
int codenum; // define ahead of goto
// Bail early if there's no code
if (!code_is_good) goto ExitUnknownCommand;
// Args pointer optimizes code_seen, especially those taking XYZEF
// This wastes a little cpu on commands that expect no arguments.
current_command_args = current_command;
while (*current_command_args != ' ') ++current_command_args;
while (*current_command_args == ' ') ++current_command_args;
// Interpret the code int
seen_pointer = current_command;
codenum = code_value_short();
// Handle a known G, M, or T
switch(command_code) {
case 'G': switch (codenum) {
if(code_seen('G')) { // G0 -> G1
int gCode = code_value_short();
switch(gCode) {
//G0 -> G1
case 0: case 0:
case 1: case 1:
gcode_G0_G1(); break; gcode_G0_G1(); break;
...@@ -6136,7 +6159,7 @@ void process_next_command() { ...@@ -6136,7 +6159,7 @@ void process_next_command() {
#ifndef SCARA #ifndef SCARA
case 2: // G2 - CW ARC case 2: // G2 - CW ARC
case 3: // G3 - CCW ARC case 3: // G3 - CCW ARC
gcode_G2_G3(gCode == 2); break; gcode_G2_G3(codenum == 2); break;
#endif #endif
// G4 Dwell // G4 Dwell
...@@ -6146,7 +6169,7 @@ void process_next_command() { ...@@ -6146,7 +6169,7 @@ void process_next_command() {
#ifdef FWRETRACT #ifdef FWRETRACT
case 10: // G10: retract case 10: // G10: retract
case 11: // G11: retract_recover case 11: // G11: retract_recover
gcode_G10_G11(gCode == 10); break; gcode_G10_G11(codenum == 10); break;
#endif //FWRETRACT #endif //FWRETRACT
case 28: //G28: Home all axes, one at a time case 28: //G28: Home all axes, one at a time
...@@ -6161,7 +6184,7 @@ void process_next_command() { ...@@ -6161,7 +6184,7 @@ void process_next_command() {
#else // Z_PROBE_SLED #else // Z_PROBE_SLED
case 31: // G31: dock the sled case 31: // G31: dock the sled
case 32: // G32: undock the sled case 32: // G32: undock the sled
dock_sled(gCode == 31); break; dock_sled(codenum == 31); break;
#endif // Z_PROBE_SLED #endif // Z_PROBE_SLED
#endif // ENABLE_AUTO_BED_LEVELING #endif // ENABLE_AUTO_BED_LEVELING
...@@ -6183,10 +6206,10 @@ void process_next_command() { ...@@ -6183,10 +6206,10 @@ void process_next_command() {
case 92: // G92 case 92: // G92
gcode_G92(); break; gcode_G92(); break;
} }
} break;
case 'M': switch (codenum) {
else if (code_seen('M')) {
switch(code_value_short()) {
#ifdef ULTIPANEL #ifdef ULTIPANEL
case 0: // M0 - Unconditional stop - Wait for user button press on LCD case 0: // M0 - Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD case 1: // M1 - Conditional stop - Wait for user button press on LCD
...@@ -6243,10 +6266,8 @@ void process_next_command() { ...@@ -6243,10 +6266,8 @@ void process_next_command() {
case 928: // M928 - Start SD write case 928: // M928 - Start SD write
gcode_M928(); break; gcode_M928(); break;
#endif //SDSUPPORT #endif //SDSUPPORT
case 31: // M31 take time since the start of the SD print or an M109 command case 31: // M31 take time since the start of the SD print or an M109 command
gcode_M31(); break; gcode_M31(); break;
case 42: // M42 -Change pin status via gcode case 42: // M42 -Change pin status via gcode
...@@ -6278,7 +6299,7 @@ void process_next_command() { ...@@ -6278,7 +6299,7 @@ void process_next_command() {
case 104: // M104 case 104: // M104
gcode_M104(); break; gcode_M104(); break;
case 105: // M105 Read current temperature case 105: // M105 Read current temperature
gcode_M105(); return; break; gcode_M105(); return; break; // "ok" already printed
#if HAS_FAN #if HAS_FAN
case 106: //M106 Fan On case 106: //M106 Fan On
...@@ -6520,17 +6541,20 @@ void process_next_command() { ...@@ -6520,17 +6541,20 @@ void process_next_command() {
gcode_SET_Z_PROBE_OFFSET(); break; gcode_SET_Z_PROBE_OFFSET(); break;
#endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET #endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
} }
} break;
else if (code_seen('T')) { case 'T':
gcode_T(code_value_short()); gcode_T(codenum);
} break;
else { default: code_is_good = false;
ECHO_SM(ER, MSG_UNKNOWN_COMMAND);
ECHO_EVM(command_queue[cmd_queue_index_r], "\"");
} }
ExitUnknownCommand:
// Still unknown command? Throw an error
if (!code_is_good) unknown_command_error();
ok_to_send(); ok_to_send();
} }
......
MarlinKimbra/language.h
View file @ 5729de2f
...@@ -200,6 +200,8 @@ ...@@ -200,6 +200,8 @@
#define MSG_T "T:" #define MSG_T "T:"
#define MSG_B "B:" #define MSG_B "B:"
#define MSG_AT "@:" #define MSG_AT "@:"
#define MSG_BAT "B@:"
#define MSG_W "W:"
#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h or send command M500 for save in EEPROM the new value!" #define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from above into Configuration.h or send command M500 for save in EEPROM the new value!"
#define MSG_PID_DEBUG " PID_DEBUG " #define MSG_PID_DEBUG " PID_DEBUG "
#define MSG_PID_DEBUG_INPUT ": Input " #define MSG_PID_DEBUG_INPUT ": Input "
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment