Default config for k40

MK/Configuration_Basic.h

@@ -7,9 +7,10 @@
  * - Board type
  * - Mechanism type
  * - Extruders number
+ * - Thermistor type
+ * - Temperature limits
  *
  * Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
- * Temperature settings can be found in Configuration_Temperature.h
  * Feature-settings can be found in Configuration_Feature.h
  * Pins-settings can be found in "Configuration_Pins.h"
  */
@@ -54,13 +55,10 @@
 // Uncomment to include more info in ok command
 //#define ADVANCED_OK
 
-//
-// Host Keepalive
-//
-// When enabled MarlinKimbra will send a busy status message to the host
+// By default MarlinKimbra will send a busy status message to the host
 // every couple of seconds when it can't accept commands.
-#define HOST_KEEPALIVE_FEATURE        // Disable this if your host doesn't like keepalive messages
-#define DEFAULT_KEEPALIVE_INTERVAL 2  // Number of seconds between "busy" messages. Set with M113.
+// Enable this option if your host doesn't like keepalive messages.
+//#define DISABLE_HOST_KEEPALIVE
 /***********************************************************************/
 
 
@@ -115,6 +113,16 @@
 //#define PS_DEFAULT_OFF
 /*************************************************************************************/
 
+/***********************************************************************
+ ******************************* Cooler ********************************
+ ***********************************************************************
+ *                                                                     *
+ * Uncomment the following line to enable COOLER support               *
+ *                                                                     *
+ ***********************************************************************/
+//#define COOLER
+
+
 
 /***********************************************************************
  ************************** Extruders number ***************************
@@ -126,4 +134,129 @@
 #define DRIVER_EXTRUDERS 1
 /***********************************************************************/
 
+
+/*****************************************************************************************************
+ ************************************** Thermistor type **********************************************
+ *****************************************************************************************************
+ *                                                                                                   *
+ * 4.7kohm PULLUP!                                                                                   *
+ * This is a normal value, if you use a 1k pullup thermistor see below                               *
+ * Please choose the one that matches your setup and set to TEMP_SENSOR_.                            *
+ *                                                                                                   *
+ * Temperature sensor settings (4.7kohm PULLUP):                                                     *
+ *  -2 is thermocouple with MAX6675 (only for sensor 0)                                              *
+ *  -1 is thermocouple with AD595 or AD597                                                           *
+ *   0 is not used                                                                                   *
+ *   1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)                                 *
+ *   2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)                                        *
+ *   3 is Mendel-parts thermistor (4.7k pullup)                                                      *
+ *   4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!     *
+ *   5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)              *
+ *   6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) *
+ *   7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)                                     *
+ *  71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)                                     *
+ *   8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)                                        *
+ *   9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)                                          *
+ *  10 is 100k RS thermistor 198-961 (4.7k pullup)                                                   *
+ *  11 is 100k beta 3950 1% thermistor (4.7k pullup)                                                 *
+ *  12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)       *
+ *  13 is 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"          *
+ *  20 is the PT100 circuit found in the Ultimainboard V2.x                                          *
+ *  40 is the 10k Carel NTC015WH01 or ELIWELL SN8T6A1502 (4.7k pullup)                               *
+ *  60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950                                    *
+ *                                                                                                   *
+ * 1kohm PULLUP!                                                                                     *
+ * This is not normal, you would have to have changed out your 4.7k for 1k                           *
+ * (but gives greater accuracy and more stable PID)                                                  *
+ * Please choose the one that matches your setup.                                                    *
+ *                                                                                                   *
+ * Temperature sensor settings (1kohm PULLUP):                                                       *
+ *  51 is 100k thermistor - EPCOS (1k pullup)                                                        *
+ *  52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)                                          *
+ *  55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)                *
+ *                                                                                                   *
+ *  1047 is Pt1000 with 4k7 pullup                                                                   *
+ *  1010 is Pt1000 with 1k pullup (non standard)                                                     *
+ *  147 is Pt100 with 4k7 pullup                                                                     *
+ *  110 is Pt100 with 1k pullup (non standard)                                                       *
+ *  998 and 999 are Dummy Tables. ALWAYS read 25°C or DUMMY_THERMISTOR_998_VALUE temperature        *
+ *                                                                                                   *
+ *****************************************************************************************************/
+#define TEMP_SENSOR_0 0
+#define TEMP_SENSOR_1 0
+#define TEMP_SENSOR_2 0
+#define TEMP_SENSOR_3 0
+#define TEMP_SENSOR_BED 0
+#define TEMP_SENSOR_COOLER 0
+
+//These 2 defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
+//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
+#define TEMP_SENSOR_AD595_OFFSET 0.0
+#define TEMP_SENSOR_AD595_GAIN   1.0
+
+// Use it for Testing or Development purposes. NEVER for production machine.
+#define DUMMY_THERMISTOR_998_VALUE 25
+#define DUMMY_THERMISTOR_999_VALUE 25
+
+//Show Temperature ADC value
+//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+//#define SHOW_TEMP_ADC_VALUES
+/*****************************************************************************************************/
+
+
+/***********************************************************************
+ ************************* Temperature limits ***************************
+ ***********************************************************************/
+// Hotend temperature must be close to target for this long before M109 returns success
+#define TEMP_RESIDENCY_TIME 10  // (seconds)
+#define TEMP_HYSTERESIS 3       // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_WINDOW     1       // (degC) Window around target to start the residency timer x degC early.
+
+// Bed temperature must be close to target for this long before M190 returns success
+#define TEMP_BED_RESIDENCY_TIME 0   // (seconds)
+#define TEMP_BED_HYSTERESIS 3       // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_BED_WINDOW     1       // (degC) Window around target to start the residency timer x degC early.
+
+// Cooler temperature must be close to target for this long before M190 returns success
+#define TEMP_COOLER_RESIDENCY_TIME 0      // (seconds)
+#define TEMP_COOLER_HYSTERESIS 1          // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_COOLER_WINDOW     1          // (degC) Window around target to start the residency timer x degC early.
+
+
+// When temperature exceeds max temp, your heater will be switched off.
+// When temperature exceeds max temp, your cooler cannot be activaed.
+// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
+// You should use MINTEMP for thermistor short/failure protection.
+#define HEATER_0_MAXTEMP 275 // (degC)
+#define HEATER_1_MAXTEMP 275 // (degC)
+#define HEATER_2_MAXTEMP 275 // (degC)
+#define HEATER_3_MAXTEMP 275 // (degC)
+#define BED_MAXTEMP      150 // (degC)
+#define COOLER_MAXTEMP   35  // 
+
+// The minimal temperature defines the temperature below which the heater will not be enabled It is used
+// or, in case of cooler, it will switched off.
+// to check that the wiring to the thermistor is not broken.
+// Otherwise this would lead to the heater being powered on all the time.
+#define HEATER_0_MINTEMP 5 // (degC)
+#define HEATER_1_MINTEMP 5 // (degC)
+#define HEATER_2_MINTEMP 5 // (degC)
+#define HEATER_3_MINTEMP 5 // (degC)
+#define BED_MINTEMP      5 // (degC)
+#define COOLER_MINTEMP  10 // (degC) 
+
+//Preheat Constants
+#define PLA_PREHEAT_HOTEND_TEMP 190
+#define PLA_PREHEAT_HPB_TEMP     60
+#define PLA_PREHEAT_FAN_SPEED   255   // Insert Value between 0 and 255
+
+#define ABS_PREHEAT_HOTEND_TEMP 240
+#define ABS_PREHEAT_HPB_TEMP    100
+#define ABS_PREHEAT_FAN_SPEED   255   // Insert Value between 0 and 255
+
+#define GUM_PREHEAT_HOTEND_TEMP 230
+#define GUM_PREHEAT_HPB_TEMP     60
+#define GUM_PREHEAT_FAN_SPEED   255   // Insert Value between 0 and 255
+/*****************************************************************************************************/
+
 #endif

MK/Configuration_Cartesian.h

@@ -39,7 +39,7 @@
  * Displayed in the LCD "Ready" message.                                                 *
  *                                                                                       *
  *****************************************************************************************/
-#define CUSTOM_MACHINE_NAME "Prusa I3"
+#define CUSTOM_MACHINE_NAME "K40 Laser cutter"
 /*****************************************************************************************/
 
 
@@ -165,7 +165,7 @@
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false
-#define DISABLE_E false      // For all extruder
+#define DISABLE_E true      // For all extruder
 // Disable only inactive extruder and keep active extruder enabled
 #define DISABLE_INACTIVE_EXTRUDER false
 /*****************************************************************************************/
@@ -178,11 +178,11 @@
  * Travel limits after homing (units are in mm)                                          *
  *                                                                                       *
  *****************************************************************************************/
-#define X_MAX_POS 200
+#define X_MAX_POS 337
 #define X_MIN_POS 0
-#define Y_MAX_POS 200
+#define Y_MAX_POS 230
 #define Y_MIN_POS 0
-#define Z_MAX_POS 200
+#define Z_MAX_POS 75
 #define Z_MIN_POS 0
 #define E_MIN_POS 0
 /*****************************************************************************************/
@@ -358,7 +358,7 @@
  ******************************* Axis steps per unit *************************************
  *****************************************************************************************/
 // Default steps per unit               X,  Y,    Z,  E0...(per extruder)
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {80, 80, 3200, 625, 625, 625, 625}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {157.4802, 157.4802, 6047.2440, 0, 0, 0, 0}
 /*****************************************************************************************/
 
 
@@ -366,7 +366,7 @@
  ********************************** Axis feedrate ****************************************
  *****************************************************************************************/
 //                                       X,   Y, Z,  E0...(per extruder). (mm/sec)
-#define DEFAULT_MAX_FEEDRATE          {300, 300, 2, 100, 100, 100, 100}
+#define DEFAULT_MAX_FEEDRATE          {500, 500, 100, 25, 0, 0, 0}
 #define MANUAL_FEEDRATE               {50*60, 50*60, 4*60, 60}  // Feedrates for manual moves along X, Y, Z, E from panel
 #define DEFAULT_MINIMUMFEEDRATE       0.0                       // minimum feedrate
 #define DEFAULT_MINTRAVELFEEDRATE     0.0
@@ -381,13 +381,13 @@
  ******************************** Axis accelleration *************************************
  *****************************************************************************************/
 //  Maximum start speed for accelerated moves.    X,    Y,  Z,   E0...(per extruder)
-#define DEFAULT_MAX_ACCELERATION              {3000, 3000, 50, 1000, 1000, 1000, 1000}
+#define DEFAULT_MAX_ACCELERATION              {2000, 2000, 50, 1000, 1000, 1000, 1000}
 //  Maximum acceleration in mm/s^2 for retracts   E0... (per extruder)
-#define DEFAULT_RETRACT_ACCELERATION          {10000, 10000, 10000, 10000}
+#define DEFAULT_RETRACT_ACCELERATION          {2000, 2000, 2000, 2000}
 //  X, Y, Z and E* maximum acceleration in mm/s^2 for printing moves
-#define DEFAULT_ACCELERATION          3000
+#define DEFAULT_ACCELERATION          2000
 //  X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
-#define DEFAULT_TRAVEL_ACCELERATION   3000
+#define DEFAULT_TRAVEL_ACCELERATION   2000
 /*****************************************************************************************/
 
 
@@ -429,9 +429,9 @@
  * For the other hotends it is their distance from the hotend 0.                         *
  *                                                                                       *
  *****************************************************************************************/
-#define HOTEND_OFFSET_X {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the X axis
-#define HOTEND_OFFSET_Y {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Y axis
-#define HOTEND_OFFSET_Z {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Z axis
+//#define HOTEND_OFFSET_X {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the X axis
+//#define HOTEND_OFFSET_Y {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Y axis
+//#define HOTEND_OFFSET_Z {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Z axis
 /*****************************************************************************************/
 
 

MK/Configuration_Feature.h

@@ -148,7 +148,7 @@
  * This prevents dangerous Extruder moves.                             *
  *                                                                     *
  ***********************************************************************/
-#define PREVENT_DANGEROUS_EXTRUDE
+//#define PREVENT_DANGEROUS_EXTRUDE
 #define EXTRUDE_MINTEMP 170 // degC
 
 // if PREVENT DANGEROUS EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
@@ -863,7 +863,7 @@
 #define FLOWMETER_MAXFREQ  55       // frequency of pulses at max flow
 
 // uncomment this to kill print job under the min flow rate, in liters/minute
-//#define MINFLOW_PROTECTION 4      
+#define MINFLOW_PROTECTION 4      
 /**************************************************************************/
 
 
@@ -1020,7 +1020,7 @@
 // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
 // REMEMBER TO INSTALL U8glib to your ARDUINO library folder: https://github.com/olikraus/U8glib_Arduino
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
 // The RepRapWorld REPRAPWORLD_KEYPAD v1.1
 // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
@@ -1131,7 +1131,7 @@
  * Check also Configuration_Laser.h                                       *
  *                                                                        *
  **************************************************************************/
-//#define LASERBEAM
+#define LASERBEAM
 /**************************************************************************/
 
 
@@ -1195,9 +1195,9 @@
  ************************** Motor's current ****************************
  ***********************************************************************/
 // Motor Current setting (Only functional on ALLIGATOR BOARD)
-#define MOTOR_CURRENT {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
+#define MOTOR_CURRENT {1, 1, 1, 1, 1, 1, 1} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
 // Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
-#define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 /***********************************************************************/
 
 

MK/Configuration_Laser.h

@@ -9,7 +9,7 @@
 // Please choose the one that matches your setup.
 // 1 = Single pin control - LOW when off, HIGH when on, PWM to adjust intensity
 // 2 = Two pin control - A firing pin for which LOW = off, HIGH = on, and a seperate intensity pin which carries a constant PWM signal and adjusts duty cycle to control intensity
-#define LASER_CONTROL 1
+#define LASER_CONTROL 2
 
 // The following define to use the new HakanBasted laser_pulse method to fire laser. It should be more efficient, but it's less tested.
 // Thanks for it to HakanBastedt that has implemented it for Marlin at https://github.com/HakanBastedt/Marlin

MK/Configuration_Temperature.h

@@ -68,7 +68,7 @@
  *  998 and 999 are Dummy Tables. ALWAYS read 25°C or DUMMY_THERMISTOR_998_VALUE temperature        *
  *                                                                                                   *
  *****************************************************************************************************/
-#define TEMP_SENSOR_0 1
+#define TEMP_SENSOR_0 25
 #define TEMP_SENSOR_1 0
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
@@ -371,14 +371,14 @@
 // all forms of cooler control obey this (PID, bang-bang, bang-bang with hysteresis)
 // setting this to anything other than 255 enables a form of PWM to the cooler,
 // so you shouldn't use it unless you are OK with PWM on your cooler.  (see the comment on enabling PIDTEMPCOOLER)
-#define MAX_COOLER_POWER 255 // limits duty cycle to cooler; 255=full current
+#define MAX_COOLER_POWER 200 // limits duty cycle to cooler; 255=full current
 
 #define PID_COOLER_INTEGRAL_DRIVE_MAX MAX_COOLER_POWER // limit for the integral term
 // 120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-#define DEFAULT_coolerKp 10.00
-#define DEFAULT_coolerKi .023
-#define DEFAULT_coolerKd 305.4
+#define DEFAULT_coolerKp 40.00
+#define DEFAULT_coolerKi .3
+#define DEFAULT_coolerKd 50.4
 
 // FIND YOUR OWN: "M303 E-3 C8 S90" to run autotune on the cooler at 90 degreesC for 8 cycles.
 
@@ -485,7 +485,7 @@
 //#define THERMAL_PROTECTION_COOLER
 
 #define THERMAL_PROTECTION_COOLER_PERIOD    30 // Seconds
-#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degree Celsius
+#define THERMAL_PROTECTION_COOLER_HYSTERESIS 2 // Degree Celsius
 
 /**
  * Whenever an M142 or M192 increases the target temperature the firmware will wait for the