Merge remote-tracking branch 'refs/remotes/origin/master' into dev

MarlinKimbra/Configuration_Delta.h

@@ -107,9 +107,6 @@
  *****************************************************************************************/
 //#define Z_PROBE_ENDSTOP
 
-// Uncomment to enable autocalibration debug messages
-#define DEBUG_MESSAGES
-
 // Speed for autocalibration travel and probing moves
 #define AUTOCAL_TRAVELRATE 100  // mm/sec
 #define AUTOCAL_PROBERATE   50  // mm/sec

MarlinKimbra/Configuration_Feature.h

@@ -32,6 +32,7 @@
  * MOTION FEATURES:
  * - Software endstops
  * - Endstops only for homing
+ * - Abort on endstop hit feature
  * - R/C Servo
  * - Late Z axis
  * - Ahead slowdown
@@ -580,19 +581,38 @@
  **************************************************************************/
 #define SOFTWARE_MIN_ENDSTOPS true  // If true, axis won't move to coordinates less than HOME_POS.
 #define SOFTWARE_MAX_ENDSTOPS true  // If true, axis won't move to coordinates greater than the defined lengths below.
-/***********************************************************************/
+/**************************************************************************/
 
 
 /**************************************************************************
  *********************** Endstops only for homing *************************
+ **************************************************************************
+ *                                                                        *
+ * If defined the endstops will only be used for homing                   *
+ *                                                                        *
  **************************************************************************/
-#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
-/***********************************************************************/
+#define ENDSTOPS_ONLY_FOR_HOMING
+/**************************************************************************/
 
 
-/***********************************************************************
- **************************** R/C Servo ********************************
- ***********************************************************************/
+/**************************************************************************
+ ******************** Abort on endstop hit feature ************************
+ **************************************************************************
+ *                                                                        *
+ * This option allows you to abort printing when any endstop is triggered.*
+ * This feature must be enabled with "M540 S1" or from the LCD menu or    *
+ * by define ABORT ON ENDSTOP HIT INIT true.                              *
+ * To have any effect, endstops must be enabled during SD printing.       *
+ * With ENDSTOPS ONLY FOR HOMING you must send "M120" to enable endstops. *
+ *                                                                        *
+ **************************************************************************/
+//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+//#define ABORT_ON_ENDSTOP_HIT_INIT true
+
+
+/**************************************************************************
+ ****************************** R/C Servo *********************************
+ **************************************************************************/
 //#define ENABLE_SERVOS
 // Number of servos
 // If you select a configuration below, this will receive a default value and does not need to be set manually
@@ -621,7 +641,7 @@
 // 300ms is a good value but you can try less delay.
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DEACTIVATION_DELAY 300
-/***********************************************************************/
+/**************************************************************************/
 
 
 /***********************************************************************
@@ -1026,12 +1046,6 @@
 // This allows hosts to request long names for files and folders with M33
 //#define LONG_FILENAME_HOST_SUPPORT
 
-// This option allows you to abort SD printing when any endstop is triggered.
-// This feature must be enabled with "M540 S1" or from the LCD menu.
-// To have any effect, endstops must be enabled during SD printing.
-// With ENDSTOPS_ONLY_FOR_HOMING you must send "M120" to enable endstops.
-//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
-
 // This enable the firmware to write some configuration that require frequent update, on the SD card
 //#define SD_SETTINGS                     // Uncomment to enable
 #define SD_CFG_SECONDS        300         // seconds between update

MarlinKimbra/Configuration_Version.h

 #ifndef CONFIGURATION_VERSION_H
   #define CONFIGURATION_VERSION_H
 
-  #define BUILD_VERSION "MarlinKimbra 4.2.3 dev"
-  #define SHORT_BUILD_VERSION "4.2.3 dev"
+  #define BUILD_VERSION "MarlinKimbra 4.2.4 dev"
+  #define SHORT_BUILD_VERSION "4.2.4 dev"
   #define STRING_DISTRIBUTION_DATE __DATE__ " " __TIME__    // build date and time
   // It might also be appropriate to define a location where additional information can be found
   #define SOURCE_CODE_URL  "https://github.com/MagoKimbra/MarlinKimbra"

MarlinKimbra/Marlin_main.h

@@ -83,6 +83,8 @@ void clamp_to_software_endstops(float target[3]);
 extern millis_t previous_cmd_ms;
 void refresh_cmd_timeout();
 
+extern void delay_ms(millis_t ms);
+
 #if ENABLED(FAST_PWM_FAN)
   void setPwmFrequency(uint8_t pin, int val);
 #endif
@@ -236,7 +238,6 @@ extern void calculate_volumetric_multipliers();
   long code_value_long();
   bool code_seen(char );
 
-
   //
   // Utility functions used by M100 to get its work done.
   //
@@ -247,4 +248,5 @@ extern void calculate_volumetric_multipliers();
   int how_many_E5s_are_here( unsigned char *);
 
 #endif
+
 #endif //MARLIN_H

MarlinKimbra/base.h

@@ -18,14 +18,14 @@
   #endif
   #include <util/delay.h>
   #include <avr/eeprom.h>
-  #include "fastio.h"
+  #include "module/fastio.h"
 #endif
 #include <avr/pgmspace.h>
 #include <avr/interrupt.h>
 
-#include "macros.h"
+#include "module/macros.h"
 #include "Boards.h"
-#include "mechanics.h"
+#include "module/mechanics.h"
 
 #include "Configuration_Version.h"
 #include "Configuration_Overall.h"
@@ -49,10 +49,10 @@
 #endif
 
 #include "language/language.h"
-#include "conditionals.h"
-#include "sanitycheck.h"
-#include "thermistortables.h"
-#include "comunication.h"
+#include "module/conditionals.h"
+#include "module/sanitycheck.h"
+#include "module/thermistortables.h"
+#include "module/comunication.h"
 
 typedef unsigned long millis_t;
 

MarlinKimbra/configuration_store.cpp

 #include "base.h"
 #include "Marlin_main.h"
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-  #include "vector_3.h"
+  #include "module/vector_3.h"
 #endif
-#include "planner.h"
-#include "stepper_indirection.h"
-#include "stepper.h"
-#include "temperature.h"
-#include "ultralcd.h"
+#include "module/planner.h"
+#include "module/stepper_indirection.h"
+#include "module/stepper.h"
+#include "module/temperature.h"
+#include "module/ultralcd.h"
 #include "configuration_store.h"
 
 #if ENABLED(SDSUPPORT)
-  #include "cardreader.h"
+  #include "module/cardreader.h"
 #endif
 /**
  * configuration_store.cpp

MarlinKimbra/language/language.h

@@ -184,11 +184,11 @@
 #define SERIAL_T_MINTEMP                       "MINTEMP triggered"
 
 // Endstop
-#define SERIAL_ENDSTOP_X                       " X:"
-#define SERIAL_ENDSTOP_Y                       " Y:"
-#define SERIAL_ENDSTOP_Z                       " Z:"
-#define SERIAL_ENDSTOP_E                       " E:"
-#define SERIAL_ENDSTOP_PROBE                   " PROBE:"
+#define SERIAL_ENDSTOP_X                       " X="
+#define SERIAL_ENDSTOP_Y                       " Y="
+#define SERIAL_ENDSTOP_Z                       " Z="
+#define SERIAL_ENDSTOP_E                       " E="
+#define SERIAL_ENDSTOP_PROBE                   " PROBE="
 
 // Debug
 #define SERIAL_DEBUG_ECHO                      "DEBUG ECHO ENABLED"

MarlinKimbra/MarlinSerial.cpp → MarlinKimbra/module/MarlinSerial.cpp

@@ -20,7 +20,7 @@
   Modified 28 September 2010 by Mark Sproul
 */
 
-#include "base.h"
+#include "../base.h"
 
 #include "MarlinSerial.h"
 

MarlinKimbra/Sd2Card.cpp → MarlinKimbra/module/Sd2Card.cpp

@@ -17,7 +17,7 @@
  * along with the Arduino Sd2Card Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-#include "base.h"
+#include "../base.h"
 
 #if ENABLED(SDSUPPORT)
 #include "Sd2Card.h"

MarlinKimbra/Sd2Card.h → MarlinKimbra/module/Sd2Card.h

@@ -18,9 +18,11 @@
  * <http://www.gnu.org/licenses/>.
  */
 
+#include "../base.h"
+
 #ifndef Sd2Card_h
 #define Sd2Card_h
-#include "base.h"
+
 #if ENABLED(SDSUPPORT)
 
 /**

MarlinKimbra/SdBaseFile.cpp → MarlinKimbra/module/SdBaseFile.cpp

@@ -18,9 +18,11 @@
  * <http://www.gnu.org/licenses/>.
  */
 
-#include "base.h"
+#include "../base.h"
+#include "../Marlin_main.h"
+
 #if ENABLED(SDSUPPORT)
-#include "Marlin_main.h"
+
 #include <stdint.h>
 #include "SdBaseFile.h"
 //------------------------------------------------------------------------------

MarlinKimbra/SdFatUtil.h → MarlinKimbra/module/SdFatUtil.h

@@ -18,14 +18,18 @@
  * <http://www.gnu.org/licenses/>.
  */
 
+#include "../base.h"
+
 #ifndef SdFatUtil_h
 #define SdFatUtil_h
+
 /**
  * \file
  * \brief Useful utility functions.
  */
- #include "base.h"
+
 #include "MarlinSerial.h"
+
 /** Store and print a string in flash memory.*/
 #define PgmPrint(x) SerialPrint_P(PSTR(x))
 /** Store and print a string in flash memory followed by a CR/LF.*/

MarlinKimbra/SdFile.cpp → MarlinKimbra/module/SdFile.cpp

@@ -17,9 +17,12 @@
  * along with the Arduino SdFat Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-#include "base.h"
+
+#include "../base.h"
+#include "../Marlin_main.h"
+
 #if ENABLED(SDSUPPORT)
-#include "Marlin_main.h"
+
 #include "SdFile.h"
 /**  Create a file object and open it in the current working directory.
  *

MarlinKimbra/SdVolume.cpp → MarlinKimbra/module/SdVolume.cpp

@@ -17,8 +17,10 @@
  * along with the Arduino SdFat Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
-#include "base.h"
-#include "Marlin_main.h"
+
+#include "../base.h"
+#include "../Marlin_main.h"
+
 #if ENABLED(SDSUPPORT)
 
 #include "SdVolume.h"

MarlinKimbra/SdVolume.h → MarlinKimbra/module/SdVolume.h

@@ -17,6 +17,7 @@
  * along with the Arduino SdFat Library.  If not, see
  * <http://www.gnu.org/licenses/>.
  */
+
 #ifndef SdVolume_h
 #define SdVolume_h
 /**

MarlinKimbra/module/buzzer.cpp

@@ -2,7 +2,7 @@
 
 #if HAS(BUZZER)
   #include "buzzer.h"
-  #include "../ultralcd.h"
+  #include "ultralcd.h"
 
   void buzz(long duration, uint16_t freq) {
     if (freq > 0) {

MarlinKimbra/cardreader.cpp → MarlinKimbra/module/cardreader.cpp

-#include "base.h"
+#include "../base.h"
 
 #if ENABLED(SDSUPPORT)
 
-#include "Marlin_main.h"
+#include "../Marlin_main.h"
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
   #include "vector_3.h"
 #endif
@@ -11,7 +11,7 @@
 #include "stepper.h"
 #include "temperature.h"
 #include "ultralcd.h"
-#include "module/nextion_lcd.h"
+#include "nextion_lcd.h"
 #include "cardreader.h"
 
 CardReader::CardReader() {

MarlinKimbra/conditionals.h → MarlinKimbra/module/conditionals.h

@@ -221,7 +221,7 @@
   #endif
 #endif
 
-#include "pins.h"
+#include "../Pins.h"
 
 /**
  * DONDOLO

MarlinKimbra/digipot_mcp4451.cpp → MarlinKimbra/module/digipot_mcp4451.cpp

-#include "base.h"
+#include "../base.h"
 
 #if ENABLED(DIGIPOT_I2C)
 

MarlinKimbra/external_dac.cpp → MarlinKimbra/module/external_dac.cpp

@@ -3,7 +3,7 @@
  * Externa DAC for Alligator Board
  *
  ****************************************************************/
-#include "base.h"
+#include "../base.h"
 
 #if MB(ALLIGATOR)
   #include "stepper.h"

MarlinKimbra/module/firmware_test.cpp

@@ -4,19 +4,18 @@
  */
 
 #include "../base.h"
+#include "../Marlin_main.h"
 
 #if ENABLED(FIRMWARE_TEST)
 
 #include "firmware_test.h"
-
-#include "../Marlin_main.h"
-#include "../planner.h"
-#include "../stepper_indirection.h"
-#include "../stepper.h"
-#include "../temperature.h"
+#include "planner.h"
+#include "stepper_indirection.h"
+#include "stepper.h"
+#include "temperature.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-  #include "../vector_3.h"
+  #include "vector_3.h"
 #endif
 
 static char serial_answer;

MarlinKimbra/module/nextion_gfx.cpp

@@ -16,10 +16,10 @@
  */
 
 #include "../base.h"
+#include "../Marlin_main.h"
 
 #if ENABLED(NEXTION_GFX)
-  #include "../Marlin_main.h"
-  #include "../stepper.h"
+  #include "stepper.h"
   #include "nextion_gfx.h"
 
   const int INSIDE  = 0;  // 0000

MarlinKimbra/module/nextion_gfx.h

@@ -15,7 +15,6 @@
  *
  */
 
-
 #ifndef NEXTION_GFX_H
   #define NEXTION_GFX_H
 

MarlinKimbra/module/nextion_lcd.cpp

 #include "../base.h"
+#include "../Marlin_main.h"
+#include "../configuration_store.h"
 
 #if ENABLED(NEXTION)
-  #include "../Marlin_main.h"
-  #include "../cardreader.h"
-  #include "../temperature.h"
+  #include "cardreader.h"
+  #include "temperature.h"
 
   #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-    #include "../vector_3.h"
+    #include "vector_3.h"
   #endif
 
-  #include "../planner.h"
-  #include "../stepper_indirection.h"
-  #include "../stepper.h"
-  #include "../configuration_store.h"
+  #include "planner.h"
+  #include "stepper_indirection.h"
+  #include "stepper.h"
   #include "nextion_lcd.h"
   #include "nextion_gfx.h"
   #include <Nextion.h>
 
+  const float MaxWave   = 0.2;
   bool NextionON        = false;
   bool PageInfo         = false;
+  bool gfxON            = false;
   char buffer[100]      = {0};
   uint32_t slidermaxval = 20;
   char lcd_status_message[30] = WELCOME_MSG;
@@ -26,7 +28,7 @@
   static millis_t next_lcd_update_ms;
 
   #if ENABLED(NEXTION_GFX)
-    GFX gfx = GFX(200, 190);
+    GFX gfx = GFX(196, 194);
   #endif
 
   // Page
@@ -39,10 +41,10 @@
   NexPage Pmove         = NexPage(6, 0, "move");
 
   // Text
-  NexText Hotend0       = NexText(1,  2,  "t0");
+  NexText Hotend0       = NexText(1,  1,  "t0");
   NexText Hotend1       = NexText(1,  4,  "t1");
-  NexText Hotend21      = NexText(1,  5,  "h2");
-  NexText Hotend2       = NexText(1,  6,  "t2");
+  NexText Hotend2       = NexText(1,  5,  "t2");
+  NexText Hotend21      = NexText(1,  6,  "h2");
   NexText LedStatus     = NexText(1,  7,  "t4");
   NexText LedCoord      = NexText(1,  8,  "t5");
   NexText set0          = NexText(2,  2,  "set0");
@@ -55,15 +57,15 @@
   NexText sdfolder      = NexText(4, 23,  "sdfolder");
 
   // Picture
-  NexPicture Menu       = NexPicture(1,  9, "p0");
-  NexPicture MSD        = NexPicture(1, 10, "p1");
-  NexPicture MSetup     = NexPicture(1, 11, "p2");
-  NexPicture Hend0      = NexPicture(1, 12, "p3");
+  NexPicture Menu       = NexPicture(1, 10, "p0");
+  NexPicture MSD        = NexPicture(1, 11, "p1");
+  NexPicture MSetup     = NexPicture(1, 12, "p2");
+  NexPicture Hend0      = NexPicture(1, 13, "p3");
   NexPicture Hend1      = NexPicture(1, 14, "p4");
-  NexPicture Hend2      = NexPicture(1, 16, "p5");
-  NexPicture Fanpic     = NexPicture(1, 18, "p6");
-  NexPicture NPlay      = NexPicture(1, 24, "p7");
-  NexPicture NStop      = NexPicture(1, 25, "p8");
+  NexPicture Hend2      = NexPicture(1, 15, "p5");
+  NexPicture Fanpic     = NexPicture(1, 19, "p6");
+  NexPicture NPlay      = NexPicture(1, 27, "p7");
+  NexPicture NStop      = NexPicture(1, 28, "p8");
   NexPicture Exit1      = NexPicture(3,  4, "p3");
   NexPicture Folder0    = NexPicture(4,  9, "p0");
   NexPicture Folder1    = NexPicture(4, 10, "p1");
@@ -84,29 +86,32 @@
   NexPicture ZDown      = NexPicture(6, 12, "p11");
 
   // Progress Bar
-  NexProgressBar sdbar  = NexProgressBar(1, 23, "j0");
+  NexProgressBar sdbar  = NexProgressBar(1, 26, "j0");
 
   // Slider
   NexSlider sdlist      = NexSlider(4, 1,   "h0");
 
   // Wafeform
+  NexWaveform Graph0    = NexWaveform(1,  9, "s0");
+  NexWaveform Graph1    = NexWaveform(1, 24, "s1");
+  NexWaveform Graph2    = NexWaveform(1, 25, "s2");
 
   // Touch area
-  NexHotspot hot0       = NexHotspot(1, 13, "hot0");
-  NexHotspot hot1       = NexHotspot(1, 15, "hot1");
-  NexHotspot hot2       = NexHotspot(1, 17, "hot2");
+  NexHotspot hot0       = NexHotspot(1, 14, "hot0");
+  NexHotspot hot1       = NexHotspot(1, 16, "hot1");
+  NexHotspot hot2       = NexHotspot(1, 18, "hot2");
   NexHotspot m11        = NexHotspot(2, 14, "m11");
   NexHotspot tup        = NexHotspot(2, 16, "tup");
   NexHotspot tdown      = NexHotspot(2, 17, "tdown");
 
   // Timer
   NexTimer startimer    = NexTimer(0,  1, "tm0");
-  NexTimer fantimer     = NexTimer(1, 22, "tm0");
+  NexTimer fantimer     = NexTimer(1, 23, "tm0");
 
   // Variable
-  NexVar Hotend         = NexVar(1, 19, "he");
-  NexVar Bed            = NexVar(1, 20, "bed");
+  NexVar Hotend         = NexVar(1, 20, "he");
   NexVar set1           = NexVar(2, 17, "set1");
+  NexVar Bed            = NexVar(1, 21, "bed");
   NexVar filename0      = NexVar(4, 19, "va0");
   NexVar filename1      = NexVar(4, 20, "va1");
   NexVar filename2      = NexVar(4, 21, "va2");
@@ -160,6 +165,14 @@
     NULL
   };
 
+  NexWaveform *graph_list[] =
+  {
+    &Graph0,
+    &Graph1,
+    &Graph2,
+    NULL
+  };
+
   NexText *row_list[] =
   {
     &sdrow0,
@@ -198,10 +211,6 @@
 
     PageInfo = true;
 
-    #if ENABLED(NEXTION_GFX)
-      gfx_clear(X_MAX_POS, Y_MAX_POS, Z_MAX_POS);
-    #endif
-
     #if HAS_TEMP_0
       Hotend.setValue(1);
     #endif
@@ -269,6 +278,7 @@
 
     static void setpagesdcard() {
       PageInfo = false;
+      gfxON    = false;
       Psdcard.show();
       uint16_t fileCnt = card.getnrfilenames();
 
@@ -426,10 +436,12 @@
   void setpagePopCallback(void *ptr) {
     if (ptr == &Menu) {
       PageInfo = false;
+      gfxON    = false;
       Pmenu.show();
     }
     else if (ptr == &MSetup) {
       PageInfo = false;
+      gfxON    = false;
       Psetup.show();
     }
 
@@ -472,7 +484,7 @@
   #endif
 
   void lcd_init() {
-    delay(1000);
+    delay_ms(1000);
     NextionON = nexInit();
 
     if (!NextionON) {
@@ -549,6 +561,11 @@
 
     hotend_list[h]->setText(buffer);
     hotend_list[h]->setColor(color);
+
+    if (!gfxON) {
+      graph_list[h]->addValue(0, (int)(T1 * MaxWave));
+      graph_list[h]->addValue(1, (int)(T2 * MaxWave));
+    }
   }
 
   static void coordtoLCD() {
@@ -661,17 +678,19 @@
 
   #if ENABLED(NEXTION_GFX)
     void gfx_clear(float x, float y, float z) {
-      if (PageInfo)
+      if (PageInfo) {
         gfx.clear(x, y, z);
+        gfxON = true;
+      }
     }
 
     void gfx_cursor_to(float x, float y, float z) {
-      if (PageInfo)
+      if (PageInfo && gfxON)
         gfx.cursor_to(x, y, z);
     }
 
     void gfx_line_to(float x, float y, float z){
-      if (PageInfo)
+      if (PageInfo && gfxON)
         gfx.line_to(VC_TOOL, x, y, z);
     }
   #endif

MarlinKimbra/planner.cpp → MarlinKimbra/module/planner.cpp

@@ -48,8 +48,8 @@
  *
  */
 
-#include "base.h"
-#include "Marlin_main.h"
+#include "../base.h"
+#include "../Marlin_main.h"
 
 #include "planner.h"
 #include "stepper_indirection.h"

MarlinKimbra/qr_solve.h → MarlinKimbra/module/qr_solve.h

-#include "base.h"
+#include "../base.h"
 
 #if ENABLED(AUTO_BED_LEVELING_GRID)
 

MarlinKimbra/stepper.cpp → MarlinKimbra/module/stepper.cpp

@@ -22,8 +22,8 @@
 /* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith
    and Philipp Tiefenbacher. */
 
-#include "base.h"
-#include "Marlin_main.h"
+#include "../base.h"
+#include "../Marlin_main.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
   #include "vector_3.h"
@@ -36,7 +36,7 @@
 #include "stepper.h"
 #include "temperature.h"
 #include "ultralcd.h"
-#include "module/nextion_lcd.h"
+#include "nextion_lcd.h"
 
 #if ENABLED(SDSUPPORT)
   #include "cardreader.h"
@@ -96,7 +96,11 @@ static volatile char endstop_hit_bits = 0; // use X_MIN, Y_MIN, Z_MIN and Z_PROB
     old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX, E_MIN
 
 #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+  #if ENABLED(ABORT_ON_ENDSTOP_HIT_INIT)
+    bool abort_on_endstop_hit = ABORT_ON_ENDSTOP_HIT_INIT;
+  #else
     bool abort_on_endstop_hit = false;
+  #endif
 #endif
 
 #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
@@ -263,7 +267,16 @@ void endstops_hit_on_purpose() {
 
 void checkHitEndstops() {
   if (endstop_hit_bits) {
+
+    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+      if (abort_on_endstop_hit)
+        ECHO_SM(ER, SERIAL_ENDSTOPS_HIT);
+      else
         ECHO_SM(DB, SERIAL_ENDSTOPS_HIT);
+    #else
+      ECHO_SM(DB, SERIAL_ENDSTOPS_HIT);
+    #endif
+
     if (endstop_hit_bits & BIT(X_MIN)) {
       ECHO_MV(SERIAL_ENDSTOP_X, (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
       LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_XS);
@@ -290,16 +303,19 @@ void checkHitEndstops() {
     #endif
     ECHO_E;
 
-    endstops_hit_on_purpose();
-
-    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
-      if (abort_on_endstop_hit) {
+    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
+      if (abort_on_endstop_hit && !(endstop_hit_bits & BIT(Z_PROBE)) && !(endstop_hit_bits & BIT(E_MIN))) {
+        #if ENABLED(SDSUPPORT)
           card.sdprinting = false;
           card.closeFile();
-        quickStop();
-        disable_all_heaters(); // switch off all heaters.
+        #endif
+        for (int i = 0; i < 3; i++) axis_known_position[i] = false; // not homed anymore
+        quickStop(); // kill the planner buffer
+        Stop();      // restart by M999
       }
     #endif
+
+    endstops_hit_on_purpose();
   }
 }
 

MarlinKimbra/stepper_indirection.cpp → MarlinKimbra/module/stepper_indirection.cpp

@@ -19,9 +19,9 @@
   along with Marlin.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "base.h"
-
+#include "../base.h"
 #include "stepper_indirection.h"
+
 #if ENABLED(HAVE_TMCDRIVER)
   #include <SPI.h>
   #include <TMC26XStepper.h>

MarlinKimbra/temperature.cpp → MarlinKimbra/module/temperature.cpp

@@ -18,13 +18,14 @@
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "base.h"
-#include "Marlin_main.h"
+#include "../base.h"
+#include "../Marlin_main.h"
+
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
   #include "vector_3.h"
 #endif
 #include "ultralcd.h"
-#include "module/nextion_lcd.h"
+#include "nextion_lcd.h"
 #include "planner.h"
 #include "stepper_indirection.h"
 #if MB(ALLIGATOR)
@@ -1101,7 +1102,7 @@ void tp_init() {
   TIMSK0 |= BIT(OCIE0B);
 
   // Wait for temperature measurement to settle
-  delay(250);
+  delay_ms(250);
 
   #define TEMP_MIN_ROUTINE(NR) \
     minttemp[NR] = HEATER_ ## NR ## _MINTEMP; \

MarlinKimbra/ultralcd.cpp → MarlinKimbra/module/ultralcd.cpp

-#include "base.h"
+#include "../base.h"
+#include "../Marlin_main.h"
+#include "../configuration_store.h"
 
 #if ENABLED(ULTRA_LCD)
 
-#include "Marlin_main.h"
 #include "cardreader.h"
 #include "temperature.h"
 
@@ -13,11 +14,10 @@
 #include "planner.h"
 #include "stepper_indirection.h"
 #include "stepper.h"
-#include "configuration_store.h"
 #include "ultralcd.h"
 
 #if HAS(BUZZER)
-  #include "module/buzzer.h"
+  #include "buzzer.h"
 #endif
 
 int8_t encoderDiff; // updated from interrupt context and added to encoderPosition every LCD update

MarlinKimbra/ultralcd.h → MarlinKimbra/module/ultralcd.h

 #ifndef ULTRALCD_H
 #define ULTRALCD_H
 
-#include "Marlin_main.h"
+#include "../Marlin_main.h"
 #if ENABLED(ULTRA_LCD)
   #if HAS(BUZZER)
-    #include "module/buzzer.h"
+    #include "buzzer.h"
   #endif
 
   int lcd_strlen(char* s);

MarlinKimbra/vector_3.cpp → MarlinKimbra/module/vector_3.cpp

@@ -17,7 +17,7 @@
   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
 #include <math.h>
-#include "base.h"
+#include "../base.h"
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
 #include "vector_3.h"

MarlinKimbra/watchdog.cpp → MarlinKimbra/module/watchdog.cpp

-#include "base.h"
+#include "../base.h"
 
 #if ENABLED(USE_WATCHDOG)