Skip to content

M
MarlinKimbra
Commit 3ad54bd4 authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Updated K40 example config files in docs

parent eb3dddc8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 208 additions and 81 deletions
Documentation/Laser/K40_ramps_configs/Configuration_Basic.h
View file @ 3ad54bd4
......@@ -9,7 +9,6 @@
* - Extruders number
* - Thermistor type
* - Temperature limits
* - UI Language
*
* Mechanisms-settings can be found in Configuration_Xxxxxx.h (where Xxxxxx can be: Cartesian - Delta - Core - Scara)
* Feature-settings can be found in Configuration_Feature.h
......@@ -52,9 +51,14 @@
//#define FIRMWARE_TEST
// Some particular clients re-start sending commands only after receiving a 'wait' when there is a bad serial-connection.
//#define NO_TIMEOUTS
//#define NO_TIMEOUTS 1000 // Milliseconds
// Uncomment to include more info in ok command
//#define ADVANCED_OK
// By default MarlinKimbra will send a busy status message to the host
// every couple of seconds when it can't accept commands.
// Enable this option if your host doesn't like keepalive messages.
//#define DISABLE_HOST_KEEPALIVE
/***********************************************************************/
......@@ -72,10 +76,22 @@
/***********************************************************************
*************************** Mechanism type ****************************
***********************************************************************
* *
* CARTESIAN - Prusa, Mendel, etc *
* COREXY - H-Bot/Core XY (x_motor = x+y, y_motor = x-y) *
* COREYX - H-Bot/Core XY (x_motor = y+x, y_motor = y-x) *
* COREXZ - H-Bot/Core XZ (x_motor = x+z, z_motor = x-z) *
* COREZX - H-Bot/Core XZ (x_motor = z+x, z_motor = z-x) *
* DELTA - Rostock, Kossel, RostockMax, Cerberus, etc *
* SCARA - SCARA *
* *
***********************************************************************/
#define MECHANISM MECH_CARTESIAN
//#define MECHANISM MECH_COREXY
//#define MECHANISM MECH_COREYX
//#define MECHANISM MECH_COREXZ
//#define MECHANISM MECH_COREZX
//#define MECHANISM MECH_DELTA
//#define MECHANISM MECH_SCARA
/***********************************************************************/
......@@ -156,11 +172,12 @@
* 998 and 999 are Dummy Tables. ALWAYS read 25°C or DUMMY_THERMISTOR_998_VALUE temperature *
* *
*****************************************************************************************************/
#define TEMP_SENSOR_0 40
#define TEMP_SENSOR_0 0
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_COOLER 40
//These 2 defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
......@@ -180,12 +197,18 @@
/***********************************************************************
************************* Temperature limits ***************************
***********************************************************************/
// Actual temperature must be close to target for this long before M109 returns success
// Hotend temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10 // (seconds)
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Bed temperature must be close to target for this long before M190 returns success
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds)
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// When temperature exceeds max temp, your heater will be switched off.
// When temperature exceeds max temp, your cooler cannot be activaed.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 // (degC)
......@@ -193,8 +216,10 @@
#define HEATER_2_MAXTEMP 275 // (degC)
#define HEATER_3_MAXTEMP 275 // (degC)
#define BED_MAXTEMP 150 // (degC)
#define COOLER_MAXTEMP 30 //
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// or, in case of cooler, it will switched off.
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5 // (degC)
......@@ -202,6 +227,7 @@
#define HEATER_2_MINTEMP 5 // (degC)
#define HEATER_3_MINTEMP 5 // (degC)
#define BED_MINTEMP 5 // (degC)
#define COOLER_MINTEMP 15 // (degC)
//Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 190
......@@ -217,34 +243,4 @@
#define GUM_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
/*****************************************************************************************************/
/***********************************************************************
*************************** UI Language ******************************
***********************************************************************
* *
* Select the language that you prefer and change LANGUAGE_CHOICE *
* *
* 1 English *
* 2 Polish *
* 3 French *
* 4 German *
* 5 Spanish *
* 6 Russian *
* 7 Italian *
* 8 Portuguese *
* 9 Finnish *
* 10 Aragonese *
* 11 Dutch *
* 12 Danish *
* 13 Catalan *
* 14 Basque-Euskera *
* 15 Portuguese (Brazil) *
* 16 Bulgarian *
* 17 Japanese *
* 18 Japanese utf *
* 19 Chinese *
* *
***********************************************************************/
#define LANGUAGE_CHOICE 1
/***********************************************************************/
#endif
Documentation/Laser/K40_ramps_configs/Configuration_Cartesian.h
View file @ 3ad54bd4
......@@ -278,9 +278,19 @@
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
// X and Y offsets MUST be INTEGERS
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Probe on: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Probe on: -front +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // -below (always!)
//
// +-- BACK ---+
// | |
// L | (+) P | R <-- probe (10,10)
// E | | I
// F | (-) N (+) | G <-- nozzle (0,0)
// T | | H
// | P (-) | T <-- probe (-10,-10)
// | |
// O-- FRONT --+
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below [of the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 10 // (in mm) Raise Z before homing (G28) for Probe Clearance.
// Be sure you have this distance over your Z_MAX_POS in case
......@@ -419,8 +429,8 @@
* For the other hotends it is their distance from the hotend 0. *
* *
*****************************************************************************************/
//#define HOTEND_OFFSET_X {0.0, 5.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the X axis
//#define HOTEND_OFFSET_Y {0.0, 5.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Y axis
//#define HOTEND_OFFSET_X {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the X axis
//#define HOTEND_OFFSET_Y {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Y axis
//#define HOTEND_OFFSET_Z {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Z axis
/*****************************************************************************************/
......
Documentation/Laser/K40_ramps_configs/Configuration_Laser.h
View file @ 3ad54bd4
......@@ -17,11 +17,6 @@
// Uncomment the following if your laser firing pin (not the PWM pin) for two pin control requires a HIGH signal to fire rather than a low (eg Red Sail M300 RS 3040)
/// #define HIGH_TO_FIRE
// Uncomment the following to enable the use of the PWM (the one for the extruder 0) to drive a peltier cell or any PWM driven cooler for the laser
#define LASER_WATER_COOLING
#define LASER_WATER_MAXTEMP 25
//// The following defines select which G codes tell the laser to fire. It's OK to uncomment more than one.
#define LASER_FIRE_G1 10 // fire the laser on a G1 move, extinguish when the move ends
#define LASER_FIRE_SPINDLE 11 // fire the laser on M3, extinguish on M5
......@@ -34,7 +29,7 @@
#define LASER_RASTER_MM_PER_PULSE 0.2 //Can be overridden by providing an R value in M649 command : M649 S17 B2 D0 R0.1 F4000
//// Uncomment the following if the laser cutter is equipped with a peripheral relay board
//// to control power to an exhaust fan, water pump, laser power supply, etc.
//// to control power to an exhaust fan, cooler pump, laser power supply, etc.
//#define LASER_PERIPHERALS
//#define LASER_PERIPHERALS_TIMEOUT 30000 // Number of milliseconds to wait for status signal from peripheral control board
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment