Skip to content

M
MarlinKimbra
Commit 28b011e5 authored by MagoKimbra's avatar MagoKimbra
Browse files
Options

Fix Laser & LCD

parent 4c2e2ab6
Hide whitespace changes
Inline Side-by-side
Showing with 432 additions and 270 deletions
Documentation/GCodes.md
View file @ 28b011e5
......@@ -137,6 +137,7 @@
* M595 - Set hotend AD595 offset and gain
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M605 - Set dual x-carriage movement mode: Smode [ X<duplication x-offset> Rduplication temp offset ]
* M649 - Set laser options. S<intensity> L<duration> P<ppm> B<set mode> R<raster mm per pulse> F<feedrate>
* M666 - Set z probe offset or Endstop and delta geometry adjustment. M666 L for list command
* M906 - Set motor currents XYZ T0-4 E
* M907 - Set digital trimpot motor current using axis codes.
......
Documentation/changelog.md
View file @ 28b011e5
### Version 4.2.83
* Add Cooler and Hot Chamber
* Add Laser Beam PWM and raster base64 ONLY ARDUINO MEGA
* Add Laser Beam PWM and raster base64
### Version 4.2.82
* Add DONDOLO_DUAL_MOTOR for DONDOLO bowden and dual extruder
......
MK/module/MK_Main.cpp
View file @ 28b011e5
......@@ -7688,7 +7688,7 @@ inline void gcode_M503() {
if (code_seen('D') && IsRunning()) laser.diagnostics = (bool) code_value();
// Wait for the rest
//st_synchronize();
// st_synchronize();
if (code_seen('S') && IsRunning()) {
laser.intensity = (float) code_value();
laser.rasterlaserpower = laser.intensity;
......
MK/module/laser/laser.cpp
View file @ 28b011e5
......@@ -23,6 +23,7 @@
/**
* laser.cpp - Laser control library for Arduino using 16 bit timers- Version 1
* Copyright (c) 2013 Timothy Schmidt. All right reserved.
* Copyright (c) 2016 Franco (nextime) Lanza
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
......@@ -304,7 +305,7 @@
#if ENABLED(LASER_PERIPHERALS)
bool laser_peripherals_ok() { return !digitalRead(LASER_PERIPHERALS_STATUS_PIN); }
void laser_peripherals_on() {
digitalWrite(LASER_PERIPHERALS_PIN, LOW);
if (laser.diagnostics)
......
MK/module/laser/laser.h
View file @ 28b011e5
......@@ -23,6 +23,7 @@
/**
* laser.cpp - Laser control library for Arduino using 16 bit timers- Version 1
* Copyright (c) 2013 Timothy Schmidt. All right reserved.
* Copyright (c) 2016 Franco (nextime) Lanza
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
......
MK/module/lcd/dogm_lcd_implementation.h
View file @ 28b011e5
......@@ -67,6 +67,10 @@
#undef USE_BIG_EDIT_FONT
#endif
#if ENABLED(LASERBEAM)
#include "../laser/laserbitmaps.h"
#endif
#if ENABLED(USE_SMALL_INFOFONT)
#include "dogm_font_data_6x9_marlin.h"
#define FONT_STATUSMENU_NAME u8g_font_6x9
......@@ -370,14 +374,34 @@ static void lcd_implementation_status_screen() {
bool blink = lcd_blink();
// Symbols menu graphics, animated fan
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
#if HAS(FAN)
blink && fanSpeed ? status_screen0_bmp : status_screen1_bmp
#else
status_screen0_bmp
#if ENABLED(LASERBEAM)
#if ENABLED(LASER_PERIPHERALS)
if (laser_peripherals_ok()) {
u8g.drawBitmapP(29,4, LASERENABLE_BYTEWIDTH, LASERENABLE_HEIGHT, laserenable_bmp);
}
#endif
);
lcd_setFont(FONT_STATUSMENU);
u8g.setColorIndex(1);
u8g.setPrintPos(3,6);
if (current_block->laser_status == LASER_ON) {
u8g.drawBitmapP(5,14, ICON_BYTEWIDTH, ICON_HEIGHT, laseron_bmp);
u8g.print(itostr3(current_block->laser_intensity));
lcd_printPGM(PSTR("%"));
} else {
u8g.drawBitmapP(5,14, ICON_BYTEWIDTH, ICON_HEIGHT, laseroff_bmp);
lcd_printPGM(PSTR("---%"));
}
#else
// Symbols menu graphics, animated fan
u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
#if HAS(FAN)
blink && fanSpeed ? status_screen0_bmp : status_screen1_bmp
#else
status_screen0_bmp
#endif
);
#endif
// Status Menu Font for SD info, Heater status, Fan, XYZ
lcd_setFont(FONT_STATUSMENU);
......@@ -434,7 +458,7 @@ static void lcd_implementation_status_screen() {
u8g.setPrintPos(90, 47);
if (end_time > 1380 || end_time == 0)
u8g.print('E--:--');
lcd_printPGM(PSTR("E--:--"));
else if (end_time > 0) {
u8g.print('E');
u8g.print(itostr2(end_time/60));
......@@ -450,13 +474,15 @@ static void lcd_implementation_status_screen() {
}
#endif
// Hotends
for (int i = 0; i < HOTENDS; i++) _draw_heater_status(6 + i * 25, i);
#if DISABLED(LASERBEAM)
// Hotends
for (int i = 0; i < HOTENDS; i++) _draw_heater_status(6 + i * 25, i);
// Heated bed
#if HOTENDS < 4 && HAS(TEMP_BED)
_draw_heater_status(81, -1);
#endif
// Heated bed
#if HOTENDS < 4 && HAS(TEMP_BED)
_draw_heater_status(81, -1);
#endif
#endif // !LASERBEAM
// Fan
u8g.setPrintPos(104, 27);
......
MK/module/lcd/ultralcd.cpp
View file @ 28b011e5
......@@ -12,11 +12,11 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
......@@ -88,6 +88,29 @@ char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kan
#define LCD_Printpos(x, y) lcd.setCursor(x, y)
#endif
#if ENABLED(LASERBEAM)
static void lcd_laser_focus_menu();
static void lcd_laser_menu();
static void lcd_laser_test_fire_menu();
static void laser_test_fire(uint8_t power, int dwell);
static void laser_set_focus(float f_length);
static void action_laser_focus_custom();
static void action_laser_focus_1mm();
static void action_laser_focus_2mm();
static void action_laser_focus_3mm();
static void action_laser_focus_4mm();
static void action_laser_focus_5mm();
static void action_laser_focus_6mm();
static void action_laser_focus_7mm();
static void action_laser_test_20_50ms();
static void action_laser_test_20_100ms();
static void action_laser_test_100_50ms();
static void action_laser_test_100_100ms();
static void action_laser_test_warm();
static void action_laser_acc_on();
static void action_laser_acc_off();
#endif
// The main status screen
static void lcd_status_screen();
......@@ -103,12 +126,17 @@ static void lcd_status_screen();
static void lcd_move_menu();
static void lcd_control_menu();
static void lcd_stats_menu();
static void lcd_control_temperature_menu();
static void lcd_control_temperature_preheat_pla_settings_menu();
static void lcd_control_temperature_preheat_abs_settings_menu();
static void lcd_control_temperature_preheat_gum_settings_menu();
#if DISABLED(LASERBEAM)
static void lcd_control_temperature_menu();
static void lcd_control_temperature_preheat_pla_settings_menu();
static void lcd_control_temperature_preheat_abs_settings_menu();
static void lcd_control_temperature_preheat_gum_settings_menu();
#endif
static void lcd_control_motion_menu();
static void lcd_control_volumetric_menu();
#if DISABLED(LASERBEAM)
static void lcd_control_volumetric_menu();
#endif
#if ENABLED(FILAMENT_CHANGE_FEATURE)
static void lcd_filament_change_option_menu();
......@@ -189,34 +217,34 @@ static void lcd_status_screen();
/**
* START_MENU generates the init code for a menu function
*/
#if ENABLED(BTN_BACK) && BTN_BACK > 0
#define START_MENU() do { \
ENCODER_DIRECTION_MENUS(); \
encoderRateMultiplierEnabled = false; \
if (encoderPosition > 0x8000) encoderPosition = 0; \
uint8_t encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM; \
NOMORE(currentMenuViewOffset, encoderLine); \
uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
bool wasClicked = LCD_CLICKED, itemSelected; \
bool wasBackClicked = LCD_BACK_CLICKED; \
if (wasBackClicked) { \
lcd_quick_feedback(); \
menu_action_back(); \
return; } \
for (uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
_menuItemNr = 0;
#else
#define START_MENU() do { \
ENCODER_DIRECTION_MENUS(); \
encoderRateMultiplierEnabled = false; \
if (encoderPosition > 0x8000) encoderPosition = 0; \
uint8_t encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM; \
NOMORE(currentMenuViewOffset, encoderLine); \
uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
bool wasClicked = LCD_CLICKED, itemSelected; \
for (uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
_menuItemNr = 0;
#endif
#if ENABLED(BTN_BACK) && BTN_BACK > 0
#define START_MENU() do { \
ENCODER_DIRECTION_MENUS(); \
encoderRateMultiplierEnabled = false; \
if (encoderPosition > 0x8000) encoderPosition = 0; \
uint8_t encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM; \
NOMORE(currentMenuViewOffset, encoderLine); \
uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
bool wasClicked = LCD_CLICKED, itemSelected; \
bool wasBackClicked = LCD_BACK_CLICKED; \
if (wasBackClicked) { \
lcd_quick_feedback(); \
menu_action_back(); \
return; } \
for (uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
_menuItemNr = 0;
#else
#define START_MENU() do { \
ENCODER_DIRECTION_MENUS(); \
encoderRateMultiplierEnabled = false; \
if (encoderPosition > 0x8000) encoderPosition = 0; \
uint8_t encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM; \
NOMORE(currentMenuViewOffset, encoderLine); \
uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
bool wasClicked = LCD_CLICKED, itemSelected; \
for (uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
_menuItemNr = 0;
#endif
/**
* MENU_ITEM generates draw & handler code for a menu item, potentially calling:
......@@ -526,14 +554,21 @@ inline void line_to_current(AxisEnum axis) {
#if ENABLED(SDSUPPORT)
static void lcd_sdcard_pause() { card.pausePrint(); }
static void lcd_sdcard_pause() {
card.pausePrint();
print_job_counter.pause();
}
static void lcd_sdcard_resume() { card.startPrint(); }
static void lcd_sdcard_resume() {
card.startPrint();
print_job_counter.start();
}
static void lcd_sdcard_stop() {
quickStop();
card.sdprinting = false;
card.closeFile();
print_job_counter.stop();
autotempShutdown();
cancel_heatup = true;
lcd_setstatus(MSG_PRINT_ABORTED, true);
......@@ -550,6 +585,13 @@ inline void line_to_current(AxisEnum axis) {
static void lcd_main_menu() {
START_MENU();
MENU_ITEM(back, MSG_WATCH);
#if ENABLED(LASERBEAM)
if (!(movesplanned() || IS_SD_PRINTING)) {
MENU_ITEM(submenu, "Laser Functions", lcd_laser_menu);
}
#endif
if (movesplanned() || IS_SD_PRINTING) {
MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu);
}
......@@ -755,6 +797,13 @@ static void lcd_tune_menu() {
#endif // HOTENDS > 2
#endif // HOTENDS > 1
//
// Laser:
//
#if ENABLED(LASERBEAM) && HAS(COOLER)
MENU_ITEM_EDIT(int3, MSG_COOLER, &target_temperature_cooler, 0, COOLER_MAXTEMP - 15);
#endif
//
// Bed:
//
......@@ -973,6 +1022,7 @@ void _lcd_preheat(int endnum, const float temph, const float tempb, const int fa
void lcd_cooldown() {
disable_all_heaters();
disable_all_coolers();
fanSpeed = 0;
lcd_return_to_status();
}
......@@ -994,11 +1044,15 @@ static void lcd_prepare_menu() {
//
// Auto Home
//
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
#if !MECH(DELTA)
MENU_ITEM(gcode, MSG_AUTO_HOME_X, PSTR("G28 X"));
MENU_ITEM(gcode, MSG_AUTO_HOME_Y, PSTR("G28 Y"));
MENU_ITEM(gcode, MSG_AUTO_HOME_Z, PSTR("G28 Z"));
#if ENABLED(LASERBEAM)
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28 X Y F2000"));
#else
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
#if !MECH(DELTA)
MENU_ITEM(gcode, MSG_AUTO_HOME_X, PSTR("G28 X"));
MENU_ITEM(gcode, MSG_AUTO_HOME_Y, PSTR("G28 Y"));
MENU_ITEM(gcode, MSG_AUTO_HOME_Z, PSTR("G28 Z"));
#endif
#endif
//
......@@ -1033,7 +1087,7 @@ static void lcd_prepare_menu() {
// Preheat ABS
// Preheat GUM
//
#if TEMP_SENSOR_0 != 0
#if TEMP_SENSOR_0 != 0 && DISABLED(LASERBEAM)
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_BED != 0
MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu);
MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu);
......@@ -1055,19 +1109,6 @@ static void lcd_prepare_menu() {
MENU_ITEM(function, MSG_RETRACT_XMM, lcd_retract);
#endif // EASY_LOAD
//
// LASER BEAM
//
#if ENABLED(LASERBEAM)
MENU_ITEM_EDIT(int3, MSG_LASER, &laser_ttl_modulation, 0, 255);
if(laser_ttl_modulation == 0) {
WRITE(LASER_PWR_PIN, LOW);
}
else {
WRITE(LASER_PWR_PIN, HIGH);
}
#endif
//
// Cooldown
//
......@@ -1275,9 +1316,13 @@ static void lcd_move_menu() {
static void lcd_control_menu() {
START_MENU();
MENU_ITEM(back, MSG_MAIN);
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
#if DISABLED(LASERBEAM)
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
#endif
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_volumetric_menu);
#if DISABLED(LASERBEAM)
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_volumetric_menu);
#endif
#if HAS(LCD_CONTRAST)
//MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
......@@ -1328,7 +1373,7 @@ static void lcd_stats_menu() {
#if ENABLED(PID_AUTOTUNE_MENU)
#if ENABLED(PIDTEMP)
int autotune_temp[HOTENDS] = { 150 };
int autotune_temp[HOTENDS] = ARRAY_BY_HOTENDS1(150);
const int heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP);
#endif
......@@ -1389,196 +1434,200 @@ static void lcd_stats_menu() {
#endif // PIDTEMP
/**
*
* "Control" > "Temperature" submenu
*
*/
static void lcd_control_temperature_menu() {
START_MENU();
#if DISABLED(LASERBEAM)
//
// ^ Control
//
MENU_ITEM(back, MSG_CONTROL);
//
// Nozzle:
//
#if HOTENDS == 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#else // HOTENDS > 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "0", &target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "1", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
#endif
#if HOTENDS > 2
#if TEMP_SENSOR_2 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "2", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
/**
*
* "Control" > "Temperature" submenu
*
*/
static void lcd_control_temperature_menu() {
START_MENU();
//
// ^ Control
//
MENU_ITEM(back, MSG_CONTROL);
//
// Nozzle:
//
#if HOTENDS == 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#if HOTENDS > 3
#if TEMP_SENSOR_3 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "3", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
#else // HOTENDS > 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "0", &target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0);
#endif
#if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "1", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1);
#endif
#if HOTENDS > 2
#if TEMP_SENSOR_2 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "2", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2);
#endif
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HOTENDS > 3
#if TEMP_SENSOR_3 != 0
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE "3", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3);
#endif
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
//
// Bed:
//
#if TEMP_SENSOR_BED != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif
//
// Bed:
//
#if TEMP_SENSOR_BED != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif
//
// Fan Speed:
//
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
//
// Fan Speed:
//
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
//
// Autotemp, Min, Max, Fact
//
#if ENABLED(AUTOTEMP) && (TEMP_SENSOR_0 != 0)
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
#endif
//
// Autotemp, Min, Max, Fact
//
#if ENABLED(AUTOTEMP) && (TEMP_SENSOR_0 != 0)
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
#endif
//
// PID-P, PID-I, PID-D, PID-C, PID Autotune
// PID-P H1, PID-I H1, PID-D H1, PID-C H1, PID Autotune H1
// PID-P H2, PID-I H2, PID-D H2, PID-C H2, PID Autotune H2
// PID-P H3, PID-I H3, PID-D H3, PID-C H3, PID Autotune H3
// PID-P H4, PID-I H4, PID-D H4, PID-C H4, PID Autotune H4
//
#if ENABLED(PIDTEMP)
#define _PID_BASE_MENU_ITEMS(HLABEL, hindex) \
raw_Ki = unscalePID_i(PID_PARAM(Ki, hindex)); \
raw_Kd = unscalePID_d(PID_PARAM(Kd, hindex)); \
MENU_ITEM_EDIT(float52, MSG_PID_P HLABEL, &PID_PARAM(Kp, hindex), 1, 9990); \
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I HLABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H ## hindex); \
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D HLABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_H ## hindex)
#if ENABLED(PID_ADD_EXTRUSION_RATE)
#define _PID_MENU_ITEMS(HLABEL, hindex) \
_PID_BASE_MENU_ITEMS(HLABEL, hindex); \
MENU_ITEM_EDIT(float3, MSG_PID_C HLABEL, &PID_PARAM(Kc, hindex), 1, 9990)
#else
#define _PID_MENU_ITEMS(HLABEL, hindex) _PID_BASE_MENU_ITEMS(HLABEL, hindex)
#endif
//
// PID-P, PID-I, PID-D, PID-C, PID Autotune
// PID-P H1, PID-I H1, PID-D H1, PID-C H1, PID Autotune H1
// PID-P H2, PID-I H2, PID-D H2, PID-C H2, PID Autotune H2
// PID-P H3, PID-I H3, PID-D H3, PID-C H3, PID Autotune H3
// PID-P H4, PID-I H4, PID-D H4, PID-C H4, PID Autotune H4
//
#if ENABLED(PIDTEMP)
#define _PID_BASE_MENU_ITEMS(HLABEL, hindex) \
raw_Ki = unscalePID_i(PID_PARAM(Ki, hindex)); \
raw_Kd = unscalePID_d(PID_PARAM(Kd, hindex)); \
MENU_ITEM_EDIT(float52, MSG_PID_P HLABEL, &PID_PARAM(Kp, hindex), 1, 9990); \
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I HLABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_H ## hindex); \
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D HLABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_H ## hindex)
#if ENABLED(PID_ADD_EXTRUSION_RATE)
#define _PID_MENU_ITEMS(HLABEL, hindex) \
_PID_BASE_MENU_ITEMS(HLABEL, hindex); \
MENU_ITEM_EDIT(float3, MSG_PID_C HLABEL, &PID_PARAM(Kc, hindex), 1, 9990)
#else
#define _PID_MENU_ITEMS(HLABEL, hindex) _PID_BASE_MENU_ITEMS(HLABEL, hindex)
#endif
#if ENABLED(PID_AUTOTUNE_MENU)
#define PID_MENU_ITEMS(HLABEL, hindex) \
_PID_MENU_ITEMS(HLABEL, hindex); \
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, SERIAL_PID_AUTOTUNE HLABEL, &autotune_temp[hindex], 150, heater_maxtemp[hindex] - 15, lcd_autotune_callback_H ## hindex)
#else
#define PID_MENU_ITEMS(HLABEL, hindex) _PID_MENU_ITEMS(HLABEL, hindex)
#endif
#if ENABLED(PID_AUTOTUNE_MENU)
#define PID_MENU_ITEMS(HLABEL, hindex) \
_PID_MENU_ITEMS(HLABEL, hindex); \
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, SERIAL_PID_AUTOTUNE HLABEL, &autotune_temp[hindex], 150, heater_maxtemp[hindex] - 15, lcd_autotune_callback_H ## hindex)
#else
#define PID_MENU_ITEMS(HLABEL, hindex) _PID_MENU_ITEMS(HLABEL, hindex)
PID_MENU_ITEMS("", 0);
#if HOTENDS > 1
PID_MENU_ITEMS(MSG_H1, 1);
#if HOTENDS > 2
PID_MENU_ITEMS(MSG_H2, 2);
#if HOTENDS > 3
PID_MENU_ITEMS(MSG_H3, 3);
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#endif // PIDTEMP
//
// Idle oozing
//
#if ENABLED(IDLE_OOZING_PREVENT)
MENU_ITEM_EDIT(bool, MSG_IDLEOOZING, &IDLE_OOZING_enabled);
#endif
PID_MENU_ITEMS("", 0);
#if HOTENDS > 1
PID_MENU_ITEMS(MSG_H1, 1);
#if HOTENDS > 2
PID_MENU_ITEMS(MSG_H2, 2);
#if HOTENDS > 3
PID_MENU_ITEMS(MSG_H3, 3);
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#endif // PIDTEMP
//
// Idle oozing
//
#if ENABLED(IDLE_OOZING_PREVENT)
MENU_ITEM_EDIT(bool, MSG_IDLEOOZING, &IDLE_OOZING_enabled);
#endif
//
// Preheat PLA conf
//
MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
//
// Preheat PLA conf
//
MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
//
// Preheat ABS conf
//
MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
//
// Preheat ABS conf
//
MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
//
// Preheat GUM conf
//
MENU_ITEM(submenu, MSG_PREHEAT_GUM_SETTINGS, lcd_control_temperature_preheat_gum_settings_menu);
END_MENU();
}
//
// Preheat GUM conf
//
MENU_ITEM(submenu, MSG_PREHEAT_GUM_SETTINGS, lcd_control_temperature_preheat_gum_settings_menu);
END_MENU();
}
/**
*
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() {
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
/**
*
* "Temperature" > "Preheat PLA conf" submenu
*
*/
static void lcd_control_temperature_preheat_pla_settings_menu() {
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
/**
*
* "Temperature" > "Preheat ABS conf" submenu
*
*/
static void lcd_control_temperature_preheat_abs_settings_menu() {
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
/**
*
* "Temperature" > "Preheat ABS conf" submenu
*
*/
static void lcd_control_temperature_preheat_abs_settings_menu() {
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
/**
*
* "Temperature" > "Preheat GUM conf" submenu
*
*/
static void lcd_control_temperature_preheat_gum_settings_menu() {
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &gumPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &gumPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &gumPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
/**
*
* "Temperature" > "Preheat GUM conf" submenu
*
*/
static void lcd_control_temperature_preheat_gum_settings_menu() {
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &gumPreheatFanSpeed, 0, 255);
#if TEMP_SENSOR_0 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &gumPreheatHotendTemp, HEATER_0_MINTEMP, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &gumPreheatHPBTemp, BED_MINTEMP, BED_MAXTEMP - 15);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
#endif // !LASERBEAM
/**
*
......@@ -1650,29 +1699,31 @@ static void lcd_control_motion_menu() {
* "Control" > "Filament" submenu
*
*/
static void lcd_control_volumetric_menu() {
START_MENU();
MENU_ITEM(back, MSG_CONTROL);
#if DISABLED(LASERBEAM)
static void lcd_control_volumetric_menu() {
START_MENU();
MENU_ITEM(back, MSG_CONTROL);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
if (volumetric_enabled) {
#if EXTRUDERS == 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER, &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#else // EXTRUDERS > 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 0", &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 1", &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#if EXTRUDERS > 2
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 2", &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#if EXTRUDERS > 3
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 3", &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
}
if (volumetric_enabled) {
#if EXTRUDERS == 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER, &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#else // EXTRUDERS > 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 0", &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 1", &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#if EXTRUDERS > 2
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 2", &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#if EXTRUDERS > 3
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER " 3", &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
}
END_MENU();
}
END_MENU();
}
#endif // !LASERBEAM
/**
*
......@@ -1730,6 +1781,88 @@ static void lcd_control_volumetric_menu() {
}
#endif // FWRETRACT
#if ENABLED(LASERBEAM)
static void lcd_laser_menu() {
START_MENU();
MENU_ITEM(back, MSG_MAIN);
MENU_ITEM(submenu, "Set Focus", lcd_laser_focus_menu);
MENU_ITEM(submenu, "Test Fire", lcd_laser_test_fire_menu);
#if ENABLED(LASER_PERIPHERALS)
if (laser_peripherals_ok()) {
MENU_ITEM(function, "Turn On Pumps/Fans", action_laser_acc_on);
}
else if (!(movesplanned() || IS_SD_PRINTING)) {
MENU_ITEM(function, "Turn Off Pumps/Fans", action_laser_acc_off);
}
#endif // LASER_PERIPHERALS
END_MENU();
}
static void lcd_laser_test_fire_menu() {
START_MENU();
MENU_ITEM(back, "Laser Functions");
MENU_ITEM(function, " 20% 50ms", action_laser_test_20_50ms);
MENU_ITEM(function, " 20% 100ms", action_laser_test_20_100ms);
MENU_ITEM(function, "100% 50ms", action_laser_test_100_50ms);
MENU_ITEM(function, "100% 100ms", action_laser_test_100_100ms);
MENU_ITEM(function, "Warm-up Laser 2sec", action_laser_test_warm);
END_MENU();
}
static void action_laser_acc_on() { enqueue_and_echo_commands_P(PSTR("M80")); }
static void action_laser_acc_off() { enqueue_and_echo_commands_P(PSTR("M81")); }
static void action_laser_test_20_50ms() { laser_test_fire(20, 50); }
static void action_laser_test_20_100ms() { laser_test_fire(20, 100); }
static void action_laser_test_100_50ms() { laser_test_fire(100, 50); }
static void action_laser_test_100_100ms() { laser_test_fire(100, 100); }
static void action_laser_test_warm() { laser_test_fire(15, 2000); }
static void laser_test_fire(uint8_t power, int dwell) {
enqueue_and_echo_commands_P(PSTR("M80")); // Enable laser accessories since we don't know if its been done (and there's no penalty for doing it again).
laser_fire(power);
delay(dwell);
laser_extinguish();
}
float focalLength = 0;
static void lcd_laser_focus_menu() {
START_MENU();
MENU_ITEM(back, "Laser Functions");
MENU_ITEM(function, "1mm", action_laser_focus_1mm);
MENU_ITEM(function, "2mm", action_laser_focus_2mm);
MENU_ITEM(function, "3mm - 1/8in", action_laser_focus_3mm);
MENU_ITEM(function, "4mm", action_laser_focus_4mm);
MENU_ITEM(function, "5mm", action_laser_focus_5mm);
MENU_ITEM(function, "6mm - 1/4in", action_laser_focus_6mm);
MENU_ITEM(function, "7mm", action_laser_focus_7mm);
MENU_ITEM_EDIT_CALLBACK(float32, "Custom", &focalLength, 0, LASER_FOCAL_HEIGHT, action_laser_focus_custom);
END_MENU();
}
static void action_laser_focus_custom() { laser_set_focus(focalLength); }
static void action_laser_focus_1mm() { laser_set_focus(1); }
static void action_laser_focus_2mm() { laser_set_focus(2); }
static void action_laser_focus_3mm() { laser_set_focus(3); }
static void action_laser_focus_4mm() { laser_set_focus(4); }
static void action_laser_focus_5mm() { laser_set_focus(5); }
static void action_laser_focus_6mm() { laser_set_focus(6); }
static void action_laser_focus_7mm() { laser_set_focus(7); }
static void laser_set_focus(float f_length) {
if (!axis_homed[Z_AXIS]) {
enqueue_and_echo_commands_P(PSTR("G28 Z F150"));
}
focalLength = f_length;
float focus = LASER_FOCAL_HEIGHT - f_length;
char cmd[20];
sprintf_P(cmd, PSTR("G0 Z%s F150"), ftostr52(focus));
enqueue_and_echo_commands_P(cmd);
}
#endif // LASERBEAM
#if ENABLED(SDSUPPORT)
#if !PIN_EXISTS(SD_DETECT)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment