Re-add configs

MK/Configuration_Cartesian.h

@@ -40,7 +40,7 @@
  * Displayed in the LCD "Ready" message.                                                 *
  *                                                                                       *
  *****************************************************************************************/
-#define CUSTOM_MACHINE_NAME "K40 Laser cutter"
+#define CUSTOM_MACHINE_NAME "Prusa I3"
 /*****************************************************************************************/
 
 
@@ -156,7 +156,7 @@
  * Change (or reverse the motor connector) if an axis goes the wrong way.                *
  *                                                                                       *
  *****************************************************************************************/
-#define INVERT_X_DIR true
+#define INVERT_X_DIR false
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false
 #define INVERT_E0_DIR false
@@ -178,7 +178,7 @@
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false
-#define DISABLE_E true      // For all extruder
+#define DISABLE_E false      // For all extruder
 // Disable only inactive extruder and keep active extruder enabled
 #define DISABLE_INACTIVE_EXTRUDER false
 /*****************************************************************************************/
@@ -191,11 +191,11 @@
  * Travel limits after homing (units are in mm)                                          *
  *                                                                                       *
  *****************************************************************************************/
-#define X_MAX_POS 337
+#define X_MAX_POS 200
 #define X_MIN_POS 0
-#define Y_MAX_POS 230
+#define Y_MAX_POS 200
 #define Y_MIN_POS 0
-#define Z_MAX_POS 75
+#define Z_MAX_POS 200
 #define Z_MIN_POS 0
 #define E_MIN_POS 0
 /*****************************************************************************************/
@@ -388,7 +388,7 @@
  ******************************* Axis steps per unit *************************************
  *****************************************************************************************/
 // Default steps per unit               X,  Y,    Z,  E0...(per extruder)
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {78.7401, 157.4802, 6047.2440, 0, 0, 0, 0}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {80, 80, 3200, 625, 625, 625, 625}
 /*****************************************************************************************/
 
 
@@ -396,7 +396,7 @@
  ********************************** Axis feedrate ****************************************
  *****************************************************************************************/
 //                                       X,   Y, Z,  E0...(per extruder). (mm/sec)
-#define DEFAULT_MAX_FEEDRATE          {500, 500, 100, 25, 0, 0, 0}
+#define DEFAULT_MAX_FEEDRATE          {300, 300, 2, 100, 100, 100, 100}
 #define MANUAL_FEEDRATE               {50*60, 50*60, 4*60, 60}  // Feedrates for manual moves along X, Y, Z, E from panel
 #define DEFAULT_MINIMUMFEEDRATE       0.0                       // minimum feedrate
 #define DEFAULT_MINTRAVELFEEDRATE     0.0
@@ -411,13 +411,13 @@
  ******************************** Axis accelleration *************************************
  *****************************************************************************************/
 //  Maximum start speed for accelerated moves.    X,    Y,  Z,   E0...(per extruder)
-#define DEFAULT_MAX_ACCELERATION              {2000, 2000, 50, 1000, 1000, 1000, 1000}
+#define DEFAULT_MAX_ACCELERATION              {3000, 3000, 50, 1000, 1000, 1000, 1000}
 //  Maximum acceleration in mm/s^2 for retracts   E0... (per extruder)
-#define DEFAULT_RETRACT_ACCELERATION          {2000, 2000, 2000, 2000}
+#define DEFAULT_RETRACT_ACCELERATION          {10000, 10000, 10000, 10000}
 //  X, Y, Z and E* maximum acceleration in mm/s^2 for printing moves
-#define DEFAULT_ACCELERATION          2000
+#define DEFAULT_ACCELERATION          3000
 //  X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
-#define DEFAULT_TRAVEL_ACCELERATION   2000
+#define DEFAULT_TRAVEL_ACCELERATION   3000
 /*****************************************************************************************/
 
 
@@ -459,9 +459,9 @@
  * For the other hotends it is their distance from the hotend 0.                         *
  *                                                                                       *
  *****************************************************************************************/
-//#define HOTEND_OFFSET_X {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the X axis
-//#define HOTEND_OFFSET_Y {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Y axis
-//#define HOTEND_OFFSET_Z {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Z axis
+#define HOTEND_OFFSET_X {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the X axis
+#define HOTEND_OFFSET_Y {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Y axis
+#define HOTEND_OFFSET_Z {0.0, 0.0, 0.0, 0.0} // (in mm) for each hotend, offset of the hotend on the Z axis
 /*****************************************************************************************/
 
 

MK/Configuration_Feature.h

@@ -149,7 +149,7 @@
  * This prevents dangerous Extruder moves.                             *
  *                                                                     *
  ***********************************************************************/
-//#define PREVENT_DANGEROUS_EXTRUDE
+#define PREVENT_DANGEROUS_EXTRUDE
 #define EXTRUDE_MINTEMP 170 // degC
 
 // if PREVENT DANGEROUS EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
@@ -875,13 +875,13 @@
  * You also need to set FLOWMETER PIN in Configurations_pins.h            *
  *                                                                        *
  **************************************************************************/
-#define FLOWMETER_SENSOR
+//#define FLOWMETER_SENSOR
 
 #define FLOWMETER_MAXFLOW  6.0      // Liters per minute max
 #define FLOWMETER_MAXFREQ  55       // frequency of pulses at max flow
 
 // uncomment this to kill print job under the min flow rate, in liters/minute
-#define MINFLOW_PROTECTION 4      
+//#define MINFLOW_PROTECTION 4      
 /**************************************************************************/
 
 
@@ -1038,7 +1038,7 @@
 // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
 // REMEMBER TO INSTALL U8glib to your ARDUINO library folder: https://github.com/olikraus/U8glib_Arduino
-#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
 // The RepRapWorld REPRAPWORLD_KEYPAD v1.1
 // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
@@ -1149,7 +1149,7 @@
  * Check also Configuration_Laser.h                                       *
  *                                                                        *
  **************************************************************************/
-#define LASERBEAM
+//#define LASERBEAM
 /**************************************************************************/
 
 
@@ -1213,9 +1213,9 @@
  ************************** Motor's current ****************************
  ***********************************************************************/
 // Motor Current setting (Only functional on ALLIGATOR BOARD)
-#define MOTOR_CURRENT {1, 1, 1, 1, 1, 1, 1} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
+#define MOTOR_CURRENT {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // X Y Z E0 E1 E2 E3 - Values 0 - 2.5 A
 // Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
-#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+#define DIGIPOT_MOTOR_CURRENT {135, 135, 135, 135, 135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 /***********************************************************************/
 
 

MK/Configuration_Store.cpp

@@ -37,7 +37,7 @@
  */
 #include "base.h"
 
-#define EEPROM_VERSION "MKV429"
+#define EEPROM_VERSION "MKV428"
 
 /**
  * MKV428 EEPROM Layout: