Skip to content

M
MarlinKimbra
Commit 074ff436 authored by Franco (nextime) Lanza's avatar Franco (nextime) Lanza
Browse files
Options

Merge branch 'master' into k40_noflow_nocooler

parents 0aafdca7 18664abd
Pipeline #87 skipped
Hide whitespace changes
Inline Side-by-side
Showing with 652 additions and 645 deletions
MK/Configuration_Store.cpp
View file @ 074ff436
......@@ -35,6 +35,7 @@
* either sets a Sane Default, or results in No Change to the existing value.
*
*/
#include "base.h"
#define EEPROM_VERSION "MKV429"
......
MK/MK.ino
View file @ 074ff436
......@@ -35,7 +35,7 @@
* "G" Codes
*
* G0 -> G1 except for laser where G0 is "move without firing"
* G1 - Coordinated Movement X Y Z E, for laser move by firing
* G1 - Coordinated Movement X Y Z E F(feedrate) P(Purge), for laser move by firing
* G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S[seconds] or P[milliseconds], delay in Second or Millisecond
......@@ -209,6 +209,7 @@
*/
#include "base.h"
#if ENABLED(DIGIPOT_I2C) || ENABLED(BLINKM)
#include <Wire.h>
#endif
......
MK/module/MK_Main.cpp
View file @ 074ff436
......@@ -1870,772 +1870,776 @@ inline void do_blocking_move_to_z(float z) { do_blocking_move_to(current_positio
delta_tower3_y = (delta_radius + tower_adj[5]) * sin((90 + tower_adj[2]) * M_PI/180);
}
bool Equal_AB(const float A, const float B, const float prec = ac_prec) {
if (abs(A - B) <= prec) return true;
return false;
}
#if ENABLED(Z_PROBE_ENDSTOP)
static void extrapolate_one_point(int x, int y, int xdir, int ydir) {
if (bed_level[x][y] != 0.0) {
return; // Don't overwrite good values.
}
float a = 2 * bed_level[x + xdir][y] - bed_level[x + xdir * 2][y]; // Left to right.
float b = 2 * bed_level[x][y + ydir] - bed_level[x][y + ydir * 2]; // Front to back.
float c = 2 * bed_level[x + xdir][y + ydir] - bed_level[x + xdir * 2][y + ydir * 2]; // Diagonal.
float median = c; // Median is robust (ignores outliers).
if (a < b) {
if (b < c) median = b;
if (c < a) median = a;
} else { // b <= a
if (c < b) median = b;
if (a < c) median = a;
bool Equal_AB(const float A, const float B, const float prec = ac_prec) {
if (abs(A - B) <= prec) return true;
return false;
}
bed_level[x][y] = median;
}
// Fill in the unprobed points (corners of circular print surface)
// using linear extrapolation, away from the center.
static void extrapolate_unprobed_bed_level() {
int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2;
for (int y = 0; y <= half; y++) {
for (int x = 0; x <= half; x++) {
if (x + y < 3) continue;
extrapolate_one_point(half - x, half - y, x > 1 ? +1:0, y > 1 ? +1:0);
extrapolate_one_point(half + x, half - y, x > 1 ? -1:0, y > 1 ? +1:0);
extrapolate_one_point(half - x, half + y, x > 1 ? +1:0, y > 1 ? -1:0);
extrapolate_one_point(half + x, half + y, x > 1 ? -1:0, y > 1 ? -1:0);
static void extrapolate_one_point(int x, int y, int xdir, int ydir) {
if (bed_level[x][y] != 0.0) {
return; // Don't overwrite good values.
}
float a = 2 * bed_level[x + xdir][y] - bed_level[x + xdir * 2][y]; // Left to right.
float b = 2 * bed_level[x][y + ydir] - bed_level[x][y + ydir * 2]; // Front to back.
float c = 2 * bed_level[x + xdir][y + ydir] - bed_level[x + xdir * 2][y + ydir * 2]; // Diagonal.
float median = c; // Median is robust (ignores outliers).
if (a < b) {
if (b < c) median = b;
if (c < a) median = a;
} else { // b <= a
if (c < b) median = b;
if (a < c) median = a;
}
bed_level[x][y] = median;
}
// Fill in the unprobed points (corners of circular print surface)
// using linear extrapolation, away from the center.
static void extrapolate_unprobed_bed_level() {
int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2;
for (int y = 0; y <= half; y++) {
for (int x = 0; x <= half; x++) {
if (x + y < 3) continue;
extrapolate_one_point(half - x, half - y, x > 1 ? +1:0, y > 1 ? +1:0);
extrapolate_one_point(half + x, half - y, x > 1 ? -1:0, y > 1 ? +1:0);
extrapolate_one_point(half - x, half + y, x > 1 ? +1:0, y > 1 ? -1:0);
extrapolate_one_point(half + x, half + y, x > 1 ? -1:0, y > 1 ? -1:0);
}
}
}
}
// Print calibration results for plotting or manual frame adjustment.
static void print_bed_level() {
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
ECHO_S(DB);
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
if(bed_level[x][y] >= 0) ECHO_M(" ");
ECHO_VM(bed_level[x][y], " ", 3);
// Print calibration results for plotting or manual frame adjustment.
static void print_bed_level() {
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
ECHO_S(DB);
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
if(bed_level[x][y] >= 0) ECHO_M(" ");
ECHO_VM(bed_level[x][y], " ", 3);
}
ECHO_E;
}
ECHO_E;
}
}
// Reset calibration results to zero.
static void reset_bed_level() {
if (DEBUGGING(INFO)) ECHO_LM(INFO, "reset_bed_level");
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
bed_level[x][y] = 0.0;
}
}
}
static void deploy_z_probe() {
static void deploy_z_probe() {
if (DEBUGGING(INFO)) DEBUG_POS("deploy_z_probe", current_position);
if (DEBUGGING(INFO)) DEBUG_POS("deploy_z_probe", current_position);
if (endstops.z_probe_enabled) return;
if (endstops.z_probe_enabled) return;
#if HAS(SERVO_ENDSTOPS)
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to_z( z_probe_deploy_start_location[Z_AXIS]);
do_blocking_move_to_xy( z_probe_deploy_start_location[X_AXIS],
z_probe_deploy_start_location[Y_AXIS]);
#if HAS(SERVO_ENDSTOPS)
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to_z( z_probe_deploy_start_location[Z_AXIS]);
do_blocking_move_to_xy( z_probe_deploy_start_location[X_AXIS],
z_probe_deploy_start_location[Y_AXIS]);
// Engage Z Servo endstop if enabled
if (servo_endstop_id[Z_AXIS] >= 0)
servo[servo_endstop_id[Z_AXIS]].move(servo_endstop_angle[Z_AXIS][0]);
#else
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to_z( z_probe_deploy_start_location[Z_AXIS]);
do_blocking_move_to_xy( z_probe_deploy_start_location[X_AXIS],
z_probe_deploy_start_location[Y_AXIS]);
// Engage Z Servo endstop if enabled
if (servo_endstop_id[Z_AXIS] >= 0)
servo[servo_endstop_id[Z_AXIS]].move(servo_endstop_angle[Z_AXIS][0]);
#else
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to_z( z_probe_deploy_start_location[Z_AXIS]);
do_blocking_move_to_xy( z_probe_deploy_start_location[X_AXIS],
z_probe_deploy_start_location[Y_AXIS]);
feedrate = homing_feedrate[Z_AXIS]/10;
do_blocking_move_to(z_probe_deploy_end_location[X_AXIS],
z_probe_deploy_end_location[Y_AXIS],
z_probe_deploy_end_location[Z_AXIS]);
feedrate = homing_feedrate[Z_AXIS]/10;
do_blocking_move_to(z_probe_deploy_end_location[X_AXIS],
z_probe_deploy_end_location[Y_AXIS],
z_probe_deploy_end_location[Z_AXIS]);
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_deploy_start_location[X_AXIS],
z_probe_deploy_start_location[Y_AXIS],
z_probe_deploy_start_location[Z_AXIS]);
#endif
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_deploy_start_location[X_AXIS],
z_probe_deploy_start_location[Y_AXIS],
z_probe_deploy_start_location[Z_AXIS]);
#endif
endstops.enable_z_probe();
sync_plan_position_delta();
}
endstops.enable_z_probe();
sync_plan_position_delta();
}
static void retract_z_probe() {
static void retract_z_probe() {
if (DEBUGGING(INFO)) DEBUG_POS("retract_z_probe", current_position);
if (DEBUGGING(INFO)) DEBUG_POS("retract_z_probe", current_position);
if (!endstops.z_probe_enabled) return;
if (!endstops.z_probe_enabled) return;
#if HAS(SERVO_ENDSTOPS)
// Retract Z Servo endstop if enabled
if (servo_endstop_id[Z_AXIS] >= 0)
servo[servo_endstop_id[Z_AXIS]].move(servo_endstop_angle[Z_AXIS][1]);
#if HAS(SERVO_ENDSTOPS)
// Retract Z Servo endstop if enabled
if (servo_endstop_id[Z_AXIS] >= 0)
servo[servo_endstop_id[Z_AXIS]].move(servo_endstop_angle[Z_AXIS][1]);
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_retract_start_location[X_AXIS],
z_probe_retract_start_location[Y_AXIS],
z_probe_retract_start_location[Z_AXIS]);
#else
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_retract_start_location[X_AXIS],
z_probe_retract_start_location[Y_AXIS],
z_probe_retract_start_location[Z_AXIS]);
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_retract_start_location[X_AXIS],
z_probe_retract_start_location[Y_AXIS],
z_probe_retract_start_location[Z_AXIS]);
#else
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_retract_start_location[X_AXIS],
z_probe_retract_start_location[Y_AXIS],
z_probe_retract_start_location[Z_AXIS]);
// Move the nozzle below the print surface to push the probe up.
feedrate = homing_feedrate[Z_AXIS]/10;
do_blocking_move_to(z_probe_retract_end_location[X_AXIS],
z_probe_retract_end_location[Y_AXIS],
z_probe_retract_end_location[Z_AXIS]);
// Move the nozzle below the print surface to push the probe up.
feedrate = homing_feedrate[Z_AXIS]/10;
do_blocking_move_to(z_probe_retract_end_location[X_AXIS],
z_probe_retract_end_location[Y_AXIS],
z_probe_retract_end_location[Z_AXIS]);
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_retract_start_location[X_AXIS],
z_probe_retract_start_location[Y_AXIS],
z_probe_retract_start_location[Z_AXIS]);
#endif
feedrate = homing_feedrate[Z_AXIS];
do_blocking_move_to(z_probe_retract_start_location[X_AXIS],
z_probe_retract_start_location[Y_AXIS],
z_probe_retract_start_location[Z_AXIS]);
#endif
endstops.enable_z_probe(false);
sync_plan_position_delta();
}
endstops.enable_z_probe(false);
sync_plan_position_delta();
}
static void run_z_probe() {
refresh_cmd_timeout();
static void run_z_probe() {
refresh_cmd_timeout();
endstops.enable();
float start_z = current_position[Z_AXIS];
long start_steps = st_get_position(Z_AXIS);
endstops.enable();
float start_z = current_position[Z_AXIS];
long start_steps = st_get_position(Z_AXIS);
feedrate = AUTOCAL_PROBERATE * 60;
destination[Z_AXIS] = -20;
prepare_move_raw();
st_synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags
feedrate = AUTOCAL_PROBERATE * 60;
destination[Z_AXIS] = -20;
prepare_move_raw();
st_synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags
endstops.enable(false);
long stop_steps = st_get_position(Z_AXIS);
float mm = start_z - float(start_steps - stop_steps) / axis_steps_per_unit[Z_AXIS];
current_position[Z_AXIS] = mm;
sync_plan_position_delta();
}
endstops.enable(false);
long stop_steps = st_get_position(Z_AXIS);
float mm = start_z - float(start_steps - stop_steps) / axis_steps_per_unit[Z_AXIS];
current_position[Z_AXIS] = mm;
sync_plan_position_delta();
}
// Probe bed height at position (x,y), returns the measured z value
static float probe_bed(float x, float y) {
// Probe bed height at position (x,y), returns the measured z value
static float probe_bed(float x, float y) {
// Move Z up to the bed_safe_z
do_blocking_move_to_z(bed_safe_z);
// Move Z up to the bed_safe_z
do_blocking_move_to_z(bed_safe_z);
float Dx = x - z_probe_offset[X_AXIS];
NOLESS(Dx, X_MIN_POS);
NOMORE(Dx, X_MAX_POS);
float Dy = y - z_probe_offset[Y_AXIS];
NOLESS(Dy, Y_MIN_POS);
NOMORE(Dy, Y_MAX_POS);
float Dx = x - z_probe_offset[X_AXIS];
NOLESS(Dx, X_MIN_POS);
NOMORE(Dx, X_MAX_POS);
float Dy = y - z_probe_offset[Y_AXIS];
NOLESS(Dy, Y_MIN_POS);
NOMORE(Dy, Y_MAX_POS);
if (DEBUGGING(INFO)) {
ECHO_LM(INFO, "probe_bed >>>");
DEBUG_POS("", current_position);
ECHO_SMV(INFO, " > do_blocking_move_to_xy ", Dx);
ECHO_EMV(", ", Dy);
}
if (DEBUGGING(INFO)) {
ECHO_LM(INFO, "probe_bed >>>");
DEBUG_POS("", current_position);
ECHO_SMV(INFO, " > do_blocking_move_to_xy ", Dx);
ECHO_EMV(", ", Dy);
}
// this also updates current_position
do_blocking_move_to_xy(Dx, Dy);
// this also updates current_position
do_blocking_move_to_xy(Dx, Dy);
run_z_probe();
float probe_z = current_position[Z_AXIS] + z_probe_offset[Z_AXIS];
run_z_probe();
float probe_z = current_position[Z_AXIS] + z_probe_offset[Z_AXIS];
if (DEBUGGING(INFO)) {
ECHO_SM(INFO, "Bed probe heights: ");
if (probe_z >= 0) ECHO_M(" ");
ECHO_EV(probe_z, 4);
}
if (DEBUGGING(INFO)) {
ECHO_SM(INFO, "Bed probe heights: ");
if (probe_z >= 0) ECHO_M(" ");
ECHO_EV(probe_z, 4);
bed_safe_z = current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS;
return probe_z;
}
bed_safe_z = current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS;
return probe_z;
}
static void bed_probe_all() {
// Initial throwaway probe.. used to stabilize probe
bed_level_c = probe_bed(0.0, 0.0);
static void bed_probe_all() {
// Initial throwaway probe.. used to stabilize probe
bed_level_c = probe_bed(0.0, 0.0);
// Probe all bed positions & store carriage positions
bed_level_z = probe_bed(0.0, bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_x = probe_bed(-SIN_60 * bed_radius, -COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
bed_level_y = probe_bed(SIN_60 * bed_radius, -COS_60 * bed_radius);
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_c = probe_bed(0.0, 0.0);
}
// Probe all bed positions & store carriage positions
bed_level_z = probe_bed(0.0, bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_x = probe_bed(-SIN_60 * bed_radius, -COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
bed_level_y = probe_bed(SIN_60 * bed_radius, -COS_60 * bed_radius);
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_c = probe_bed(0.0, 0.0);
}
static void apply_endstop_adjustment(float x_endstop, float y_endstop, float z_endstop) {
memcpy(saved_endstop_adj, endstop_adj, sizeof(saved_endstop_adj));
endstop_adj[X_AXIS] += x_endstop;
endstop_adj[Y_AXIS] += y_endstop;
endstop_adj[Z_AXIS] += z_endstop;
static void apply_endstop_adjustment(float x_endstop, float y_endstop, float z_endstop) {
memcpy(saved_endstop_adj, endstop_adj, sizeof(saved_endstop_adj));
endstop_adj[X_AXIS] += x_endstop;
endstop_adj[Y_AXIS] += y_endstop;
endstop_adj[Z_AXIS] += z_endstop;
calculate_delta(current_position);
plan_set_position(delta[TOWER_1] - (endstop_adj[X_AXIS] - saved_endstop_adj[X_AXIS]) , delta[TOWER_2] - (endstop_adj[Y_AXIS] - saved_endstop_adj[Y_AXIS]), delta[TOWER_3] - (endstop_adj[Z_AXIS] - saved_endstop_adj[Z_AXIS]), current_position[E_AXIS]);
st_synchronize();
}
calculate_delta(current_position);
plan_set_position(delta[TOWER_1] - (endstop_adj[X_AXIS] - saved_endstop_adj[X_AXIS]) , delta[TOWER_2] - (endstop_adj[Y_AXIS] - saved_endstop_adj[Y_AXIS]), delta[TOWER_3] - (endstop_adj[Z_AXIS] - saved_endstop_adj[Z_AXIS]), current_position[E_AXIS]);
st_synchronize();
}
static void adj_endstops() {
boolean x_done = false;
boolean y_done = false;
boolean z_done = false;
float prv_bed_level_x, prv_bed_level_y, prv_bed_level_z;
static void adj_endstops() {
boolean x_done = false;
boolean y_done = false;
boolean z_done = false;
float prv_bed_level_x, prv_bed_level_y, prv_bed_level_z;
do {
bed_level_z = probe_bed(0.0, bed_radius);
bed_level_x = probe_bed(-SIN_60 * bed_radius, -COS_60 * bed_radius);
bed_level_y = probe_bed(SIN_60 * bed_radius, -COS_60 * bed_radius);
do {
bed_level_z = probe_bed(0.0, bed_radius);
bed_level_x = probe_bed(-SIN_60 * bed_radius, -COS_60 * bed_radius);
bed_level_y = probe_bed(SIN_60 * bed_radius, -COS_60 * bed_radius);
apply_endstop_adjustment(bed_level_x, bed_level_y, bed_level_z);
ECHO_SMV(DB, "x:", bed_level_x, 4);
ECHO_MV(" (adj:", endstop_adj[0], 4);
ECHO_MV(") y:", bed_level_y, 4);
ECHO_MV(" (adj:", endstop_adj[1], 4);
ECHO_MV(") z:", bed_level_z, 4);
ECHO_MV(" (adj:", endstop_adj[2], 4);
ECHO_EM(")");
if ((bed_level_x >= -ac_prec) and (bed_level_x <= ac_prec)) {
x_done = true;
ECHO_SM(DB, "X=OK ");
}
else {
x_done = false;
ECHO_SM(DB, "X=ERROR ");
}
apply_endstop_adjustment(bed_level_x, bed_level_y, bed_level_z);
if ((bed_level_y >= -ac_prec) and (bed_level_y <= ac_prec)) {
y_done = true;
ECHO_M("Y=OK ");
}
else {
y_done = false;
ECHO_M("Y=ERROR ");
}
ECHO_SMV(DB, "x:", bed_level_x, 4);
ECHO_MV(" (adj:", endstop_adj[0], 4);
ECHO_MV(") y:", bed_level_y, 4);
ECHO_MV(" (adj:", endstop_adj[1], 4);
ECHO_MV(") z:", bed_level_z, 4);
ECHO_MV(" (adj:", endstop_adj[2], 4);
ECHO_EM(")");
if ((bed_level_z >= -ac_prec) and (bed_level_z <= ac_prec)) {
z_done = true;
ECHO_EM("Z=OK");
}
else {
z_done = false;
ECHO_EM("Z=ERROR");
}
} while (((x_done == false) or (y_done == false) or (z_done == false)));
if ((bed_level_x >= -ac_prec) and (bed_level_x <= ac_prec)) {
x_done = true;
ECHO_SM(DB, "X=OK ");
}
else {
x_done = false;
ECHO_SM(DB, "X=ERROR ");
}
float high_endstop = max(max(endstop_adj[0], endstop_adj[1]), endstop_adj[2]);
if ((bed_level_y >= -ac_prec) and (bed_level_y <= ac_prec)) {
y_done = true;
ECHO_M("Y=OK ");
}
else {
y_done = false;
ECHO_M("Y=ERROR ");
if (DEBUGGING(INFO)) {
ECHO_LMV(INFO, "High endstop: ", high_endstop, 4);
}
if ((bed_level_z >= -ac_prec) and (bed_level_z <= ac_prec)) {
z_done = true;
ECHO_EM("Z=OK");
if (high_endstop > 0) {
ECHO_LMV(DB, "Reducing Build height by ", high_endstop);
for(uint8_t i = 0; i < 3; i++) {
endstop_adj[i] -= high_endstop;
}
sw_endstop_max[Z_AXIS] -= high_endstop;
}
else {
z_done = false;
ECHO_EM("Z=ERROR");
else if (high_endstop < 0) {
ECHO_LMV(DB, "Increment Build height by ", abs(high_endstop));
for(uint8_t i = 0; i < 3; i++) {
endstop_adj[i] -= high_endstop;
}
sw_endstop_max[Z_AXIS] -= high_endstop;
}
} while (((x_done == false) or (y_done == false) or (z_done == false)));
float high_endstop = max(max(endstop_adj[0], endstop_adj[1]), endstop_adj[2]);
if (DEBUGGING(INFO)) {
ECHO_LMV(INFO, "High endstop: ", high_endstop, 4);
set_delta_constants();
}
if (high_endstop > 0) {
ECHO_LMV(DB, "Reducing Build height by ", high_endstop);
for(uint8_t i = 0; i < 3; i++) {
endstop_adj[i] -= high_endstop;
}
sw_endstop_max[Z_AXIS] -= high_endstop;
}
else if (high_endstop < 0) {
ECHO_LMV(DB, "Increment Build height by ", abs(high_endstop));
for(uint8_t i = 0; i < 3; i++) {
endstop_adj[i] -= high_endstop;
}
sw_endstop_max[Z_AXIS] -= high_endstop;
}
set_delta_constants();
}
int fix_tower_errors() {
boolean t1_err, t2_err, t3_err;
boolean xy_equal, xz_equal, yz_equal;
float saved_tower_adj[6];
int err_tower;
float low_diff, high_diff;
float x_diff, y_diff, z_diff;
float xy_diff, yz_diff, xz_diff;
float low_opp, high_opp;
for (uint8_t i = 0; i < 6; i++) saved_tower_adj[i] = tower_adj[i];
err_tower = 0;
x_diff = abs(bed_level_x - bed_level_ox);
high_diff = x_diff;
y_diff = abs(bed_level_y - bed_level_oy);
if (y_diff > high_diff) high_diff = y_diff;
z_diff = abs(bed_level_z - bed_level_oz);
if (z_diff > high_diff) high_diff = z_diff;
if (x_diff <= ac_prec) t1_err = false; else t1_err = true;
if (y_diff <= ac_prec) t2_err = false; else t2_err = true;
if (z_diff <= ac_prec) t3_err = false; else t3_err = true;
ECHO_LMV(DB, "x_diff = ", x_diff, 5);
ECHO_LMV(DB, "y_diff = ", y_diff, 5);
ECHO_LMV(DB, "z_diff = ", z_diff, 5);
ECHO_LMV(DB, "high_diff = ", high_diff, 5);
// Are all errors equal? (within defined precision)
xy_equal = false;
xz_equal = false;
yz_equal = false;
if (Equal_AB(x_diff, y_diff)) xy_equal = true;
if (Equal_AB(x_diff, z_diff)) xz_equal = true;
if (Equal_AB(y_diff, z_diff)) yz_equal = true;
ECHO_SM(DB, "xy_equal = ");
if (xy_equal == true) ECHO_EM("true"); else ECHO_EM("false");
ECHO_SM(DB, "xz_equal = ");
if (xz_equal == true) ECHO_EM("true"); else ECHO_EM("false");
ECHO_SM(DB, "yz_equal = ");
if (yz_equal == true) ECHO_EM("true"); else ECHO_EM("false");
low_opp = bed_level_ox;
high_opp = low_opp;
if (bed_level_oy < low_opp) low_opp = bed_level_oy;
if (bed_level_oy > high_opp) high_opp = bed_level_oy;
if (bed_level_oz < low_opp) low_opp = bed_level_oz;
if (bed_level_oz > high_opp) high_opp = bed_level_oz;
ECHO_LMV(DB, "Opp Range = ", high_opp - low_opp, 5);
if (Equal_AB(high_opp, low_opp)) {
ECHO_LM(DB, "Opposite Points within Limits - Adjustment not required");
t1_err = false;
t2_err = false;
t3_err = false;
}
// All Towers have errors
if ((t1_err == true) and (t2_err == true) and (t3_err == true)) {
if ((xy_equal == false) or (xz_equal == false) or (yz_equal == false)) {
// Errors not equal .. select the tower that needs to be adjusted
if (Equal_AB(high_diff, x_diff, 0.00001)) err_tower = 1;
if (Equal_AB(high_diff, y_diff, 0.00001)) err_tower = 2;
if (Equal_AB(high_diff, z_diff, 0.00001)) err_tower = 3;
ECHO_SMV(DB, "Tower ", err_tower);
ECHO_EM(" has largest error");
}
if ((xy_equal == true) and (xz_equal == true) and (yz_equal == true)) {
ECHO_LM(DB, "All Towers Errors Equal");
int fix_tower_errors() {
boolean t1_err, t2_err, t3_err;
boolean xy_equal, xz_equal, yz_equal;
float saved_tower_adj[6];
int err_tower;
float low_diff, high_diff;
float x_diff, y_diff, z_diff;
float xy_diff, yz_diff, xz_diff;
float low_opp, high_opp;
for (uint8_t i = 0; i < 6; i++) saved_tower_adj[i] = tower_adj[i];
err_tower = 0;
x_diff = abs(bed_level_x - bed_level_ox);
high_diff = x_diff;
y_diff = abs(bed_level_y - bed_level_oy);
if (y_diff > high_diff) high_diff = y_diff;
z_diff = abs(bed_level_z - bed_level_oz);
if (z_diff > high_diff) high_diff = z_diff;
if (x_diff <= ac_prec) t1_err = false; else t1_err = true;
if (y_diff <= ac_prec) t2_err = false; else t2_err = true;
if (z_diff <= ac_prec) t3_err = false; else t3_err = true;
ECHO_LMV(DB, "x_diff = ", x_diff, 5);
ECHO_LMV(DB, "y_diff = ", y_diff, 5);
ECHO_LMV(DB, "z_diff = ", z_diff, 5);
ECHO_LMV(DB, "high_diff = ", high_diff, 5);
// Are all errors equal? (within defined precision)
xy_equal = false;
xz_equal = false;
yz_equal = false;
if (Equal_AB(x_diff, y_diff)) xy_equal = true;
if (Equal_AB(x_diff, z_diff)) xz_equal = true;
if (Equal_AB(y_diff, z_diff)) yz_equal = true;
ECHO_SM(DB, "xy_equal = ");
if (xy_equal == true) ECHO_EM("true"); else ECHO_EM("false");
ECHO_SM(DB, "xz_equal = ");
if (xz_equal == true) ECHO_EM("true"); else ECHO_EM("false");
ECHO_SM(DB, "yz_equal = ");
if (yz_equal == true) ECHO_EM("true"); else ECHO_EM("false");
low_opp = bed_level_ox;
high_opp = low_opp;
if (bed_level_oy < low_opp) low_opp = bed_level_oy;
if (bed_level_oy > high_opp) high_opp = bed_level_oy;
if (bed_level_oz < low_opp) low_opp = bed_level_oz;
if (bed_level_oz > high_opp) high_opp = bed_level_oz;
ECHO_LMV(DB, "Opp Range = ", high_opp - low_opp, 5);
if (Equal_AB(high_opp, low_opp)) {
ECHO_LM(DB, "Opposite Points within Limits - Adjustment not required");
t1_err = false;
t2_err = false;
t3_err = false;
}
}
/*
// Two tower errors
if ((t1_err == true) and (t2_err == true) and (t3_err == false)) err_tower = 3;
if ((t1_err == true) and (t2_err == false) and (t3_err == true)) err_tower = 2;
if ((t1_err == false) and (t2_err == true) and (t3_err == true)) err_tower = 1;
*/
// Single tower error
if ((t1_err == true) and (t2_err == false) and (t3_err == false)) err_tower = 1;
if ((t1_err == false) and (t2_err == true) and (t3_err == false)) err_tower = 2;
if ((t1_err == false) and (t2_err == false) and (t3_err == true)) err_tower = 3;
ECHO_SM(DB, "t1:");
if (t1_err == true) ECHO_M("Err"); else ECHO_M("OK");
ECHO_M(" t2:");
if (t2_err == true) ECHO_M("Err"); else ECHO_M("OK");
ECHO_M(" t3:");
if (t3_err == true) ECHO_M("Err"); else ECHO_M("OK");
ECHO_E;
if (err_tower == 0) {
ECHO_LM(DB, "Tower geometry OK");
}
else {
ECHO_SMV(DB, "Tower", int(err_tower));
ECHO_EM(" Error: Adjusting");
adj_tower_radius(err_tower);
}
//Set return value to indicate if anything has been changed (0 = no change)
int retval = 0;
for (uint8_t i = 0; i < 6; i++) if (saved_tower_adj[i] != tower_adj[i]) retval++;
return retval;
}
// All Towers have errors
if ((t1_err == true) and (t2_err == true) and (t3_err == true)) {
if ((xy_equal == false) or (xz_equal == false) or (yz_equal == false)) {
// Errors not equal .. select the tower that needs to be adjusted
if (Equal_AB(high_diff, x_diff, 0.00001)) err_tower = 1;
if (Equal_AB(high_diff, y_diff, 0.00001)) err_tower = 2;
if (Equal_AB(high_diff, z_diff, 0.00001)) err_tower = 3;
ECHO_SMV(DB, "Tower ", err_tower);
ECHO_EM(" has largest error");
}
if ((xy_equal == true) and (xz_equal == true) and (yz_equal == true)) {
ECHO_LM(DB, "All Towers Errors Equal");
t1_err = false;
t2_err = false;
t3_err = false;
}
}
bool adj_deltaradius() {
float adj_r;
uint8_t c_nochange_count = 0;
float nochange_r;
/*
// Two tower errors
if ((t1_err == true) and (t2_err == true) and (t3_err == false)) err_tower = 3;
if ((t1_err == true) and (t2_err == false) and (t3_err == true)) err_tower = 2;
if ((t1_err == false) and (t2_err == true) and (t3_err == true)) err_tower = 1;
*/
// Single tower error
if ((t1_err == true) and (t2_err == false) and (t3_err == false)) err_tower = 1;
if ((t1_err == false) and (t2_err == true) and (t3_err == false)) err_tower = 2;
if ((t1_err == false) and (t2_err == false) and (t3_err == true)) err_tower = 3;
ECHO_SM(DB, "t1:");
if (t1_err == true) ECHO_M("Err"); else ECHO_M("OK");
ECHO_M(" t2:");
if (t2_err == true) ECHO_M("Err"); else ECHO_M("OK");
ECHO_M(" t3:");
if (t3_err == true) ECHO_M("Err"); else ECHO_M("OK");
ECHO_E;
bed_level_c = probe_bed(0.0, 0.0);
if (err_tower == 0) {
ECHO_LM(DB, "Tower geometry OK");
}
else {
ECHO_SMV(DB, "Tower", int(err_tower));
ECHO_EM(" Error: Adjusting");
adj_tower_radius(err_tower);
}
if ((bed_level_c >= -ac_prec) and (bed_level_c <= ac_prec)) {
ECHO_LM(DB, "Delta Radius OK");
return false;
//Set return value to indicate if anything has been changed (0 = no change)
int retval = 0;
for (uint8_t i = 0; i < 6; i++) if (saved_tower_adj[i] != tower_adj[i]) retval++;
return retval;
}
else {
ECHO_LM(DB, "Adjusting Delta Radius");
ECHO_LMV(DB, "Bed level center = ", bed_level_c);
// set initial direction and magnitude for delta radius adjustment
adj_r = 0.2;
if (bed_level_c > 0) adj_r = -0.2;
bool adj_deltaradius() {
float adj_r;
uint8_t c_nochange_count = 0;
float nochange_r;
do {
delta_radius += adj_r;
set_delta_constants();
bed_level_c = probe_bed(0.0, 0.0);
bed_level_c = probe_bed(0.0, 0.0);
if ((bed_level_c >= -ac_prec) and (bed_level_c <= ac_prec)) {
ECHO_LM(DB, "Delta Radius OK");
return false;
}
else {
ECHO_LM(DB, "Adjusting Delta Radius");
ECHO_LMV(DB, "Bed level center = ", bed_level_c);
//Show progress
ECHO_SMV(DB, "r:", delta_radius, 4);
ECHO_MV(" (adj:", adj_r, 6);
ECHO_EMV(") c:", bed_level_c, 4);
// set initial direction and magnitude for delta radius adjustment
adj_r = 0.2;
if (bed_level_c > 0) adj_r = -0.2;
//Adjust delta radius
if (bed_level_c < 0) adj_r = (abs(adj_r) / 2);
if (bed_level_c > 0) adj_r = -(abs(adj_r) / 2);
do {
delta_radius += adj_r;
set_delta_constants();
} while(bed_level_c < -ac_prec or bed_level_c > ac_prec);
bed_level_c = probe_bed(0.0, 0.0);
return true;
}
}
//Show progress
ECHO_SMV(DB, "r:", delta_radius, 4);
ECHO_MV(" (adj:", adj_r, 6);
ECHO_EMV(") c:", bed_level_c, 4);
static void adj_tower_radius(int tower) {
boolean done,t1_done,t2_done,t3_done;
int nochange_count;
float target, prev_target, prev_bed_level;
float temp, adj_target;
//Adjust delta radius
if (bed_level_c < 0) adj_r = (abs(adj_r) / 2);
if (bed_level_c > 0) adj_r = -(abs(adj_r) / 2);
//Set inital tower adjustment values
adj_t1_Radius = 0;
adj_t2_Radius = 0;
adj_t3_Radius = 0;
nochange_count = 0;
} while(bed_level_c < -ac_prec or bed_level_c > ac_prec);
if ((tower == 1) and (adj_t1_Radius == 0)) {
target = (bed_level_oy + bed_level_oz) / 2;
temp = (bed_level_ox - target) / 2;
adj_target = target + temp;
if (bed_level_ox < adj_target) adj_t1_Radius = -0.4;
if (bed_level_ox > adj_target) adj_t1_Radius = 0.4;
}
if ((tower == 2) and (adj_t2_Radius == 0)) {
target = (bed_level_ox + bed_level_oz) / 2;
temp = (bed_level_oy - target) / 2;
adj_target = target + temp;
if (bed_level_oy < adj_target) adj_t2_Radius = -0.4;
if (bed_level_oy > adj_target) adj_t2_Radius = 0.4;
}
if ((tower == 3) and (adj_t3_Radius == 0)) {
target = (bed_level_oy + bed_level_ox) / 2;
temp = (bed_level_oz - target) / 2;
adj_target = target + temp;
if (bed_level_oz < adj_target) adj_t3_Radius = -0.4; //0.4;
if (bed_level_oz > adj_target) adj_t3_Radius = 0.4; //-0.4;
return true;
}
}
do {
tower_adj[3] += adj_t1_Radius;
tower_adj[4] += adj_t2_Radius;
tower_adj[5] += adj_t3_Radius;
set_delta_constants();
static void adj_tower_radius(int tower) {
boolean done,t1_done,t2_done,t3_done;
int nochange_count;
float target, prev_target, prev_bed_level;
float temp, adj_target;
//done = false;
t1_done = false;
t2_done = false;
t3_done = false;
if (tower == 1) {
t2_done = true;
t3_done = true;
prev_target = adj_target;
prev_bed_level = bed_level_ox;
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
//Set inital tower adjustment values
adj_t1_Radius = 0;
adj_t2_Radius = 0;
adj_t3_Radius = 0;
nochange_count = 0;
if ((tower == 1) and (adj_t1_Radius == 0)) {
target = (bed_level_oy + bed_level_oz) / 2;
temp = (bed_level_ox - target) / 2;
adj_target = target + temp;
if (((bed_level_ox < adj_target) and (adj_t1_Radius > 0)) or ((bed_level_ox > adj_target) and (adj_t1_Radius < 0))) adj_t1_Radius = -(adj_t1_Radius / 2);
if (Equal_AB(bed_level_ox, adj_target, ac_prec / 2)) t1_done = true;
if (Equal_AB(bed_level_ox, prev_bed_level, ac_prec / 2) and Equal_AB(adj_target, prev_target, ac_prec / 2)) nochange_count ++;
if (nochange_count > 1) {
ECHO_LM(DB, "Stuck in Loop.. Exiting");
if (bed_level_ox < adj_target) adj_t1_Radius = -0.4;
if (bed_level_ox > adj_target) adj_t1_Radius = 0.4;
}
if ((tower == 2) and (adj_t2_Radius == 0)) {
target = (bed_level_ox + bed_level_oz) / 2;
temp = (bed_level_oy - target) / 2;
adj_target = target + temp;
if (bed_level_oy < adj_target) adj_t2_Radius = -0.4;
if (bed_level_oy > adj_target) adj_t2_Radius = 0.4;
}
if ((tower == 3) and (adj_t3_Radius == 0)) {
target = (bed_level_oy + bed_level_ox) / 2;
temp = (bed_level_oz - target) / 2;
adj_target = target + temp;
if (bed_level_oz < adj_target) adj_t3_Radius = -0.4; //0.4;
if (bed_level_oz > adj_target) adj_t3_Radius = 0.4; //-0.4;
}
do {
tower_adj[3] += adj_t1_Radius;
tower_adj[4] += adj_t2_Radius;
tower_adj[5] += adj_t3_Radius;
set_delta_constants();
//done = false;
t1_done = false;
t2_done = false;
t3_done = false;
if (tower == 1) {
t2_done = true;
t3_done = true;
prev_target = adj_target;
prev_bed_level = bed_level_ox;
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
target = (bed_level_oy + bed_level_oz) / 2;
temp = (bed_level_ox - target) / 2;
adj_target = target + temp;
if (((bed_level_ox < adj_target) and (adj_t1_Radius > 0)) or ((bed_level_ox > adj_target) and (adj_t1_Radius < 0))) adj_t1_Radius = -(adj_t1_Radius / 2);
if (Equal_AB(bed_level_ox, adj_target, ac_prec / 2)) t1_done = true;
if (Equal_AB(bed_level_ox, prev_bed_level, ac_prec / 2) and Equal_AB(adj_target, prev_target, ac_prec / 2)) nochange_count ++;
if (nochange_count > 1) {
ECHO_LM(DB, "Stuck in Loop.. Exiting");
t1_done = true;
}
ECHO_SMV(DB, "target:", adj_target, 6);
ECHO_MV(" ox:", bed_level_ox, 6);
ECHO_MV(" tower radius adj:", tower_adj[3], 6);
if (t1_done == true) ECHO_EM(" done:true"); else ECHO_EM(" done:false");
}
if (tower == 2) {
t1_done = true;
t3_done = true;
prev_target = adj_target;
prev_bed_level = bed_level_oy;
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
target = (bed_level_ox + bed_level_oz) /2;
temp = (bed_level_oy - target) / 2;
adj_target = target + temp;
if (((bed_level_oy < adj_target) and (adj_t2_Radius > 0)) or ((bed_level_oy > adj_target) and (adj_t2_Radius < 0))) adj_t2_Radius = -(adj_t2_Radius / 2);
if (Equal_AB(bed_level_oy, adj_target, ac_prec / 2)) t2_done = true;
if (Equal_AB(bed_level_oy, prev_bed_level, ac_prec / 2) and Equal_AB(adj_target, prev_target, ac_prec / 2)) nochange_count ++;
if (nochange_count > 1) {
ECHO_LM(DB, "Stuck in Loop.. Exiting");
t2_done = true;
}
ECHO_SMV(DB, "target:", adj_target, 6);
ECHO_MV(" oy:", bed_level_oy, 6);
ECHO_MV(" tower radius adj:", tower_adj[4], 6);
if (t2_done == true) ECHO_EM(" done:true"); else ECHO_EM(" done:false");
}
ECHO_SMV(DB, "target:", adj_target, 6);
ECHO_MV(" ox:", bed_level_ox, 6);
ECHO_MV(" tower radius adj:", tower_adj[3], 6);
if (t1_done == true) ECHO_EM(" done:true"); else ECHO_EM(" done:false");
}
if (tower == 3) {
t1_done = true;
t2_done = true;
prev_target = adj_target;
prev_bed_level = bed_level_oz;
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
target = (bed_level_oy + bed_level_ox) / 2;
temp = (bed_level_oz - target) / 2;
adj_target = target + temp;
if (((bed_level_oz < adj_target) and (adj_t3_Radius > 0)) or ((bed_level_oz > adj_target) and (adj_t3_Radius < 0))) adj_t3_Radius = -(adj_t3_Radius / 2);
if (Equal_AB(bed_level_oz, adj_target, ac_prec / 2)) t3_done = true;
if (Equal_AB(bed_level_oz, prev_bed_level, ac_prec / 2) and Equal_AB(adj_target, prev_target, ac_prec / 2)) nochange_count ++;
if (nochange_count > 1) {
ECHO_LM(DB, "Stuck in Loop.. Exiting");
t3_done = true;
}
ECHO_SMV(DB, "target:", adj_target, 6);
ECHO_MV(" oz:", bed_level_oz, 6);
ECHO_MV(" tower radius adj:", tower_adj[5], 6);
if (t3_done == true) ECHO_EM(" done:true"); else ECHO_EM(" done:false");
}
} while ((t1_done == false) or (t2_done == false) or (t3_done == false));
}
if (tower == 2) {
t1_done = true;
t3_done = true;
prev_target = adj_target;
prev_bed_level = bed_level_oy;
static void adj_tower_delta(int tower) {
float adj_val = 0;
float adj_mag = 0.2;
float adj_prv;
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
do {
tower_adj[tower - 1] += adj_val;
set_delta_constants();
target = (bed_level_ox + bed_level_oz) /2;
temp = (bed_level_oy - target) / 2;
adj_target = target + temp;
if (((bed_level_oy < adj_target) and (adj_t2_Radius > 0)) or ((bed_level_oy > adj_target) and (adj_t2_Radius < 0))) adj_t2_Radius = -(adj_t2_Radius / 2);
if (Equal_AB(bed_level_oy, adj_target, ac_prec / 2)) t2_done = true;
if (Equal_AB(bed_level_oy, prev_bed_level, ac_prec / 2) and Equal_AB(adj_target, prev_target, ac_prec / 2)) nochange_count ++;
if (nochange_count > 1) {
ECHO_LM(DB, "Stuck in Loop.. Exiting");
t2_done = true;
if ((tower == 1) or (tower == 3)) bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
if ((tower == 1) or (tower == 2)) bed_level_oz = probe_bed(0.0, -bed_radius);
if ((tower == 2) or (tower == 3)) bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
adj_prv = adj_val;
adj_val = 0;
if (tower == 1) {
if (bed_level_oy < bed_level_oz) adj_val = adj_mag;
if (bed_level_oy > bed_level_oz) adj_val = -adj_mag;
}
ECHO_SMV(DB, "target:", adj_target, 6);
ECHO_MV(" oy:", bed_level_oy, 6);
ECHO_MV(" tower radius adj:", tower_adj[4], 6);
if (t2_done == true) ECHO_EM(" done:true"); else ECHO_EM(" done:false");
}
if (tower == 2) {
if (bed_level_oz < bed_level_ox) adj_val = adj_mag;
if (bed_level_oz > bed_level_ox) adj_val = -adj_mag;
}
if (tower == 3) {
t1_done = true;
t2_done = true;
prev_target = adj_target;
prev_bed_level = bed_level_oz;
if (tower == 3) {
if (bed_level_ox < bed_level_oy) adj_val = adj_mag;
if (bed_level_ox > bed_level_oy) adj_val = -adj_mag;
}
if ((adj_val > 0) and (adj_prv < 0)) {
adj_mag = adj_mag / 2;
adj_val = adj_mag;
}
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
if ((adj_val < 0) and (adj_prv > 0)) {
adj_mag = adj_mag / 2;
adj_val = -adj_mag;
}
target = (bed_level_oy + bed_level_ox) / 2;
temp = (bed_level_oz - target) / 2;
adj_target = target + temp;
if (((bed_level_oz < adj_target) and (adj_t3_Radius > 0)) or ((bed_level_oz > adj_target) and (adj_t3_Radius < 0))) adj_t3_Radius = -(adj_t3_Radius / 2);
if (Equal_AB(bed_level_oz, adj_target, ac_prec / 2)) t3_done = true;
if (Equal_AB(bed_level_oz, prev_bed_level, ac_prec / 2) and Equal_AB(adj_target, prev_target, ac_prec / 2)) nochange_count ++;
if (nochange_count > 1) {
ECHO_LM(DB, "Stuck in Loop.. Exiting");
t3_done = true;
// Show Adjustments made
if (tower == 1) {
ECHO_SMV(DB, "oy:", bed_level_oy, 4);
ECHO_MV(" oz:", bed_level_oz, 4);
}
ECHO_SMV(DB, "target:", adj_target, 6);
ECHO_MV(" oz:", bed_level_oz, 6);
ECHO_MV(" tower radius adj:", tower_adj[5], 6);
if (t3_done == true) ECHO_EM(" done:true"); else ECHO_EM(" done:false");
}
} while ((t1_done == false) or (t2_done == false) or (t3_done == false));
}
static void adj_tower_delta(int tower) {
float adj_val = 0;
float adj_mag = 0.2;
float adj_prv;
if (tower == 2) {
ECHO_SMV(DB, "ox:", bed_level_ox, 4);
ECHO_MV(" oz:", bed_level_oz, 4);
}
do {
tower_adj[tower - 1] += adj_val;
set_delta_constants();
if (tower == 3) {
ECHO_SMV(DB, "ox:", bed_level_ox, 4);
ECHO_MV(" oy:", bed_level_oy, 4);
}
if ((tower == 1) or (tower == 3)) bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
if ((tower == 1) or (tower == 2)) bed_level_oz = probe_bed(0.0, -bed_radius);
if ((tower == 2) or (tower == 3)) bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
ECHO_EMV(" tower delta adj:", adj_val, 5);
} while(adj_val != 0);
}
adj_prv = adj_val;
adj_val = 0;
float adj_diagrod_length() {
float adj_val = 0;
float adj_mag = 0.2;
float adj_prv, target;
float prev_diag_rod = delta_diagonal_rod;
if (tower == 1) {
if (bed_level_oy < bed_level_oz) adj_val = adj_mag;
if (bed_level_oy > bed_level_oz) adj_val = -adj_mag;
}
do {
delta_diagonal_rod += adj_val;
set_delta_constants();
if (tower == 2) {
if (bed_level_oz < bed_level_ox) adj_val = adj_mag;
if (bed_level_oz > bed_level_ox) adj_val = -adj_mag;
}
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_c = probe_bed(0.0, 0.0);
if (tower == 3) {
if (bed_level_ox < bed_level_oy) adj_val = adj_mag;
if (bed_level_ox > bed_level_oy) adj_val = -adj_mag;
}
if ((adj_val > 0) and (adj_prv < 0)) {
adj_mag = adj_mag / 2;
adj_val = adj_mag;
}
target = (bed_level_ox + bed_level_oy + bed_level_oz) / 3;
adj_prv = adj_val;
adj_val = 0;
if ((adj_val < 0) and (adj_prv > 0)) {
adj_mag = adj_mag / 2;
adj_val = -adj_mag;
}
if (bed_level_c - 0.005 < target) adj_val = -adj_mag;
if (bed_level_c + 0.005 > target) adj_val = adj_mag;
// Show Adjustments made
if (tower == 1) {
ECHO_SMV(DB, "oy:", bed_level_oy, 4);
ECHO_MV(" oz:", bed_level_oz, 4);
}
if (((adj_val > 0) and (adj_prv < 0)) or ((adj_val < 0) and (adj_prv > 0))) {
adj_val = adj_val / 2;
adj_mag = adj_mag / 2;
}
if (tower == 2) {
ECHO_SMV(DB, "ox:", bed_level_ox, 4);
ECHO_MV(" oz:", bed_level_oz, 4);
}
if ((bed_level_c - 0.005 < target) and (bed_level_c + 0.005 > target)) adj_val = 0;
if (tower == 3) {
ECHO_SMV(DB, "ox:", bed_level_ox, 4);
ECHO_MV(" oy:", bed_level_oy, 4);
}
// If adj magnatude is very small.. quit adjusting
if ((abs(adj_val) < 0.001) and (adj_val != 0)) adj_val = 0;
ECHO_EMV(" tower delta adj:", adj_val, 5);
} while(adj_val != 0);
}
ECHO_SMV(DB, "target:", target, 4);
ECHO_MV(" c:", bed_level_c, 4);
ECHO_EMV(" adj:", adj_val, 5);
} while(adj_val != 0);
return (delta_diagonal_rod - prev_diag_rod);
}
float adj_diagrod_length() {
float adj_val = 0;
float adj_mag = 0.2;
float adj_prv, target;
float prev_diag_rod = delta_diagonal_rod;
static void calibrate_print_surface() {
float probe_bed_z, probe_z, probe_h, probe_l;
int probe_count, auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS;
do {
delta_diagonal_rod += adj_val;
set_delta_constants();
int left_probe_bed_position = LEFT_PROBE_BED_POSITION,
right_probe_bed_position = RIGHT_PROBE_BED_POSITION,
front_probe_bed_position = FRONT_PROBE_BED_POSITION,
back_probe_bed_position = BACK_PROBE_BED_POSITION;
bed_level_oy = probe_bed(-SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_oz = probe_bed(0.0, -bed_radius);
bed_level_ox = probe_bed(SIN_60 * bed_radius, COS_60 * bed_radius);
bed_level_c = probe_bed(0.0, 0.0);
// probe at the points of a lattice grid
const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points - 1),
yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points - 1);
target = (bed_level_ox + bed_level_oy + bed_level_oz) / 3;
adj_prv = adj_val;
adj_val = 0;
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
if (bed_level_c - 0.005 < target) adj_val = -adj_mag;
if (bed_level_c + 0.005 > target) adj_val = adj_mag;
// First point
bed_level_c = probe_bed(0.0, 0.0);
if (((adj_val > 0) and (adj_prv < 0)) or ((adj_val < 0) and (adj_prv > 0))) {
adj_val = adj_val / 2;
adj_mag = adj_mag / 2;
}
bool zig = true;
if ((bed_level_c - 0.005 < target) and (bed_level_c + 0.005 > target)) adj_val = 0;
for (int yCount = 0; yCount < auto_bed_leveling_grid_points; yCount++) {
double yProbe = front_probe_bed_position + yGridSpacing * yCount;
int xStart, xStop, xInc;
// If adj magnatude is very small.. quit adjusting
if ((abs(adj_val) < 0.001) and (adj_val != 0)) adj_val = 0;
if (zig) {
xStart = 0;
xStop = auto_bed_leveling_grid_points;
xInc = 1;
}
else {
xStart = auto_bed_leveling_grid_points - 1;
xStop = -1;
xInc = -1;
}
ECHO_SMV(DB, "target:", target, 4);
ECHO_MV(" c:", bed_level_c, 4);
ECHO_EMV(" adj:", adj_val, 5);
} while(adj_val != 0);
return (delta_diagonal_rod - prev_diag_rod);
}
zig = !zig;
static void calibrate_print_surface() {
float probe_bed_z, probe_z, probe_h, probe_l;
int probe_count, auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS;
for (int xCount = xStart; xCount != xStop; xCount += xInc) {
double xProbe = left_probe_bed_position + xGridSpacing * xCount;
int left_probe_bed_position = LEFT_PROBE_BED_POSITION,
right_probe_bed_position = RIGHT_PROBE_BED_POSITION,
front_probe_bed_position = FRONT_PROBE_BED_POSITION,
back_probe_bed_position = BACK_PROBE_BED_POSITION;
// Avoid probing the corners (outside the round or hexagon print surface) on a delta printer.
float distance_from_center = sqrt(xProbe * xProbe + yProbe * yProbe);
if (distance_from_center > DELTA_PROBABLE_RADIUS) continue;
// probe at the points of a lattice grid
const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points - 1),
yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points - 1);
bed_level[xCount][yCount] = probe_bed(xProbe, yProbe);
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
idle();
} // xProbe
} // yProbe
// First point
bed_level_c = probe_bed(0.0, 0.0);
extrapolate_unprobed_bed_level();
print_bed_level();
}
bool zig = true;
static void calibration_report() {
// Display Report
ECHO_LM(DB, "| \tZ-Tower\t\t\tEndstop Offsets");
ECHO_SM(DB, "| \t");
if (bed_level_z >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_z, 4);
ECHO_MV("\t\t\tX:", endstop_adj[0], 4);
ECHO_MV(" Y:", endstop_adj[1], 4);
ECHO_EMV(" Z:", endstop_adj[2], 4);
ECHO_SM(DB, "| ");
if (bed_level_ox >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_ox, 4);
ECHO_M("\t");
if (bed_level_oy >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_oy, 4);
ECHO_EM("\t\tTower Offsets");
ECHO_SM(DB, "| \t");
if (bed_level_c >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_c, 4);
ECHO_MV("\t\t\tA:",tower_adj[0]);
ECHO_MV(" B:",tower_adj[1]);
ECHO_EMV(" C:",tower_adj[2]);
ECHO_SM(DB, "| ");
if (bed_level_x >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_x, 4);
ECHO_M("\t");
if (bed_level_y >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_y, 4);
ECHO_MV("\t\tI:",tower_adj[3]);
ECHO_MV(" J:",tower_adj[4]);
ECHO_EMV(" K:",tower_adj[5]);
ECHO_SM(DB, "| \t");
if (bed_level_oz >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_oz, 4);
ECHO_EMV("\t\t\tDelta Radius: ", delta_radius, 4);
ECHO_LMV(DB, "| X-Tower\tY-Tower\t\tDiagonal Rod: ", delta_diagonal_rod, 4);
ECHO_E;
}
for (int yCount = 0; yCount < auto_bed_leveling_grid_points; yCount++) {
double yProbe = front_probe_bed_position + yGridSpacing * yCount;
int xStart, xStop, xInc;
#endif
if (zig) {
xStart = 0;
xStop = auto_bed_leveling_grid_points;
xInc = 1;
// Reset calibration results to zero.
static void reset_bed_level() {
if (DEBUGGING(INFO)) ECHO_LM(INFO, "reset_bed_level");
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
bed_level[x][y] = 0.0;
}
else {
xStart = auto_bed_leveling_grid_points - 1;
xStop = -1;
xInc = -1;
}
zig = !zig;
for (int xCount = xStart; xCount != xStop; xCount += xInc) {
double xProbe = left_probe_bed_position + xGridSpacing * xCount;
// Avoid probing the corners (outside the round or hexagon print surface) on a delta printer.
float distance_from_center = sqrt(xProbe * xProbe + yProbe * yProbe);
if (distance_from_center > DELTA_PROBABLE_RADIUS) continue;
bed_level[xCount][yCount] = probe_bed(xProbe, yProbe);
idle();
} // xProbe
} // yProbe
extrapolate_unprobed_bed_level();
print_bed_level();
}
static void calibration_report() {
// Display Report
ECHO_LM(DB, "| \tZ-Tower\t\t\tEndstop Offsets");
ECHO_SM(DB, "| \t");
if (bed_level_z >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_z, 4);
ECHO_MV("\t\t\tX:", endstop_adj[0], 4);
ECHO_MV(" Y:", endstop_adj[1], 4);
ECHO_EMV(" Z:", endstop_adj[2], 4);
ECHO_SM(DB, "| ");
if (bed_level_ox >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_ox, 4);
ECHO_M("\t");
if (bed_level_oy >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_oy, 4);
ECHO_EM("\t\tTower Offsets");
ECHO_SM(DB, "| \t");
if (bed_level_c >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_c, 4);
ECHO_MV("\t\t\tA:",tower_adj[0]);
ECHO_MV(" B:",tower_adj[1]);
ECHO_EMV(" C:",tower_adj[2]);
ECHO_SM(DB, "| ");
if (bed_level_x >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_x, 4);
ECHO_M("\t");
if (bed_level_y >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_y, 4);
ECHO_MV("\t\tI:",tower_adj[3]);
ECHO_MV(" J:",tower_adj[4]);
ECHO_EMV(" K:",tower_adj[5]);
ECHO_SM(DB, "| \t");
if (bed_level_oz >= 0) ECHO_M(" ");
ECHO_MV("", bed_level_oz, 4);
ECHO_EMV("\t\t\tDelta Radius: ", delta_radius, 4);
ECHO_LMV(DB, "| X-Tower\tY-Tower\t\tDiagonal Rod: ", delta_diagonal_rod, 4);
ECHO_E;
}
}
static void home_delta_axis() {
......@@ -5626,6 +5630,7 @@ inline void gcode_M81() {
laser_peripherals_off();
#endif
#endif
delay_ms(1000); // Wait 1 second before switching off
#if HAS(SUICIDE)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment