Make nRF5 example fit better in nRF ecosystem

By making dir hierarchy replicate that of examples provided with the nRF
IoT SDK.

Also, example for Keil uVision IDE is added.

PUBLISHED_FROM=1a3d9a54d15eb1acfb1b5d162138576a387ed21c

examples/nRF52/README.md

-# nRF52 example project
-
-This example shows how to use mongoose on nRF52 boards.
-To run it you will need:
-
-- [nRF52 DK](https://www.nordicsemi.com/Products/Getting-started-with-the-nRF52-Development-Kit) dev board
-- Linux machine with 6lowpan module enabled. There are a few tutorials out there,
-  e.g [this one](https://devzone.nordicsemi.com/blogs/972/setting-up-ipv6-over-ble-using-nrf52-series-and-co/)
-- [Docker](https://docs.docker.com/engine/installation/linux/)
-
-## Building firmware and cleaning
-
-Nothing special: `make` and `make clean`.
-
-## Flashing
-
-`make flash`
-
-## Watch debug output
-
-This is a two-step process:
-
-- In a separate terminal, invoke `make jlinkexe`. It will run `JLinkExe`
-  utility, in which you'll need to type `connect`. You can actually do a lot of
-  things there, including halting and stopping the target, flashing firmware,
-  etc. You can type `?` to get the list of all available commands.
-- Now, in another terminal, invoke `make rtt`. It will start RTT client which
-  will connect to the running `JLinkExe` and will show logs from the device.
-
-## Debug with GDB
-
-This is a two-step process:
-
-- In a separate terminal, invoke `make gdbserver`. Note that `make jlinkexe`
-  and `make gdbserver`, unfortunately, cannot run sumultaneously.
-- Now, in another terminal, invoke `make gdb`. It will start GDB session which
-  will connect to the running GDB server.
+This is a Mongoose "Hello, world" that can be compiled under nRF IoT SDK.
 
+To make it work, you should download [nRF5 IoT SDK](http://developer.nordicsemi.com/nRF5_IoT_SDK/) and unpack it in current directory as `nrf5_iot_sdk`.

examples/nRF52/config/app_cfg.h

-/*
- * Copyright (c) 2014-2016 Cesanta Software Limited
- * All rights reserved
- */
-
-#if !defined(COMMISSIONING_ENABLED) /* ifdef-ok */
-# define COMMISSIONING_ENABLED 0
-#endif

examples/nRF52/bleconfig.c → examples/nRF52/http/bleconfig.c

-/*
- * Copyright (c) 2014-2016 Cesanta Software Limited
- * All rights reserved
- */
 
 /* clang-format off */
 
@@ -35,12 +31,11 @@
 #include "ipv6_medium.h"
 #include "SEGGER_RTT.h"
 #include "myboard.h"
-#include "app_cfg.h"
 
 #define SCHED_MAX_EVENT_DATA_SIZE           128                                                     /**< Maximum size of scheduler events. */
 #define SCHED_QUEUE_SIZE                    12                                                      /**< Maximum number of events in the scheduler queue. */
 
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
 #define ERASE_BUTTON_PIN_NO                 BSP_BUTTON_3                                            /**< Button used to erase commissioning settings. */
 #endif // COMMISSIONING_ENABLED
 
@@ -71,7 +66,7 @@ static ipv6_medium_instance_t               m_ipv6_medium;
 static struct tcp_pcb                     * mp_tcp_port;                                            /**< TCP Port to listen on. */
 static tcp_state_t                          m_tcp_state;                                            /**< TCP State information. */
 
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
 static bool                                 m_power_off_on_failure = false;
 static bool                                 m_identity_mode_active;
 #endif // COMMISSIONING_ENABLED
@@ -79,7 +74,7 @@ static bool                                 m_identity_mode_active;
 /**@brief Function to handle interface up event. */
 void nrf_driver_interface_up(void)
 {
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
   commissioning_joining_mode_timer_ctrl(JOINING_MODE_TIMER_STOP_RESET);
 #endif // COMMISSIONING_ENABLED
 
@@ -97,7 +92,7 @@ void nrf_driver_interface_up(void)
 /**@brief Function to handle interface down event. */
 void nrf_driver_interface_down(void)
 {
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
   commissioning_joining_mode_timer_ctrl(JOINING_MODE_TIMER_START);
 #endif // COMMISSIONING_ENABLED
 
@@ -156,7 +151,7 @@ static void leds_init(void)
   LEDS_OFF(ALL_APP_LED);
 }
 
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
 /**@brief Timer callback used for controlling board LEDs to represent application state.
  *
  */
@@ -211,7 +206,7 @@ static void iot_timer_init(void)
   static const iot_timer_client_t list_of_clients[] =
   {
     {system_timer_callback,   LWIP_SYS_TICK_MS},
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
     {blink_timeout_handler,   LED_BLINK_INTERVAL_MS},
     {commissioning_time_tick, SEC_TO_MILLISEC(COMMISSIONING_TICK_INTERVAL_SEC)}
 #endif // COMMISSIONING_ENABLED
@@ -258,7 +253,7 @@ static void ip_stack_init(void)
   APP_ERROR_CHECK(err_code);
 }
 
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
 /**@brief Function for handling button events.
  *
  * @param[in]   pin_no         The pin number of the button pressed.
@@ -286,7 +281,7 @@ static void buttons_init(void)
 
   static app_button_cfg_t buttons[] =
   {
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
     {ERASE_BUTTON_PIN_NO, false, BUTTON_PULL, button_event_handler}
 #endif // COMMISSIONING_ENABLED
   };
@@ -340,7 +335,7 @@ static void on_ipv6_medium_error(ipv6_medium_error_t * p_ipv6_medium_error)
   // Do something.
 }
 
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
 void commissioning_id_mode_cb(mode_control_cmd_t control_command)
 {
   switch (control_command)
@@ -386,7 +381,7 @@ void bleconfig_init(void) {
   timers_init();
   iot_timer_init();
 
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
   err_code = pstorage_init();
   APP_ERROR_CHECK(err_code);
 
@@ -398,7 +393,7 @@ void bleconfig_init(void) {
   ipv6_medium_init_params.ipv6_medium_evt_handler    = on_ipv6_medium_evt;
   ipv6_medium_init_params.ipv6_medium_error_handler  = on_ipv6_medium_error;
   ipv6_medium_init_params.use_scheduler              = true;
-#if COMMISSIONING_ENABLED
+#ifdef COMMISSIONING_ENABLED
   ipv6_medium_init_params.commissioning_id_mode_cb   = commissioning_id_mode_cb;
   ipv6_medium_init_params.commissioning_power_off_cb = commissioning_power_off_cb;
 #endif // COMMISSIONING_ENABLED

examples/nRF52/.gdbinit → examples/nRF52/http/boards/pca10040/armgcc/.gdbinit

 target extended-remote localhost:2331
-file out/example.out
+file _build/nrf52832_xxaa_s1xx_iot.out

examples/nRF52/Makefile → examples/nRF52/http/boards/pca10040/armgcc/Makefile.docker

 SDK ?= $(shell cat sdk.version)
-SRC_DIR ?= $(realpath ../../..)
+SRC_DIR ?= $(realpath ../../../../../../..)
 
 .PHONY: all clean flash gdbserver gdb jlinkexe rtt
 
@@ -22,5 +22,6 @@ all clean flash gdbserver gdb jlinkexe rtt:
 	$(V)docker run --rm -it $(ADD_DOCKER_ARGS) -v $(SRC_DIR):/src $(SDK) \
 		/bin/bash -c "\
 			make -C /src/mongoose mongoose.c mongoose.h && \
-			make -C /src/mongoose/examples/nRF52 -f Makefile.build $@ -$(MAKEFLAGS) \
+			if [ ! -e /src/mongoose/examples/nRF52/nrf5_iot_sdk ]; then ln -s /opt/nrf5_iot_sdk /src/mongoose/examples/nRF52/nrf5_iot_sdk; fi && \
+			make -C /src/mongoose/examples/nRF52/http/boards/pca10040/armgcc $@ -$(MAKEFLAGS) \
 		"

examples/nRF52/http/boards/pca10040/armgcc/README.md

+`Makefile` is intended to be used under nRF IoT SDK (see
+../../../../README.md); `Makefile.docker` is intended to be used under Cesanta
+repository.

examples/nRF52/ld/mongoose_example_nrf52.ld → examples/nRF52/http/boards/pca10040/armgcc/iot_lwip_tcp_server_gcc_nrf52.ld

@@ -9,4 +9,4 @@ MEMORY
   RAM (rwx) :  ORIGIN = 0x20002800, LENGTH = 0xd800
 }
 
-INCLUDE "nrf5x_common.ld"
+INCLUDE "nrf5x_common.ld"
\ No newline at end of file

examples/nRF52/main.c → examples/nRF52/http/main.c

@@ -6,7 +6,7 @@
 #include "bleconfig.h"
 #include "myboard.h"
 
-#include "../../mongoose.h"
+#include "mongoose.h"
 
 /*
  * This is a callback invoked by Mongoose to signal that a poll is needed soon.
@@ -72,9 +72,11 @@ int main(void)
     // Note that many connections can be added to a single event manager
     // Connections can be created at any point, e.g. in event handler function
     const char *err;
-    struct mg_bind_opts opts = {};
+    struct mg_bind_opts opts;
+    struct mg_connection *nc = NULL;
+    memset(&opts, 0x00, sizeof(opts));
     opts.error_string = &err;
-    struct mg_connection *nc = mg_bind_opt(&mgr, "80", ev_handler, opts);  // Create listening connection and add it to the event manager
+    nc = mg_bind_opt(&mgr, "80", ev_handler, opts);  // Create listening connection and add it to the event manager
     if (nc == NULL) {
       printf("Failed to create listener: %s\n", err);
       return 1;

examples/nRF52/rtt/RTT/SEGGER_RTT_Conf.h → examples/nRF52/http/rtt/RTT/SEGGER_RTT_Conf.h

@@ -27,7 +27,7 @@ Purpose : Implementation of SEGGER real-time terminal which allows
 #define SEGGER_RTT_MAX_NUM_UP_BUFFERS             (2)     // Max. number of up-buffers (T->H) available on this target    (Default: 2)
 #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS           (2)     // Max. number of down-buffers (H->T) available on this target  (Default: 2)
 
-#define BUFFER_SIZE_UP                            (512)  // Size of the buffer for terminal output of target, up to host (Default: 1k)
+#define BUFFER_SIZE_UP                            (2048)  // Size of the buffer for terminal output of target, up to host (Default: 1k)
 #define BUFFER_SIZE_DOWN                          (16)    // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
 
 #define SEGGER_RTT_PRINTF_BUFFER_SIZE             (64)    // Size of buffer for RTT printf to bulk-send chars via RTT     (Default: 64)

examples/nRF52/ld/nrf5x_common.ld

-/* Linker script for Nordic Semiconductor nRF5 devices
- *
- * Version: Sourcery G++ 4.5-1
- * Support: https://support.codesourcery.com/GNUToolchain/
- *
- * Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions.  No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- *   Reset_Handler : Entry of reset handler
- * 
- * It defines following symbols, which code can use without definition:
- *   __exidx_start
- *   __exidx_end
- *   __etext
- *   __data_start__
- *   __preinit_array_start
- *   __preinit_array_end
- *   __init_array_start
- *   __init_array_end
- *   __fini_array_start
- *   __fini_array_end
- *   __data_end__
- *   __bss_start__
- *   __bss_end__
- *   __end__
- *   end
- *   __HeapLimit
- *   __StackLimit
- *   __StackTop
- *   __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
-	.text :
-	{
-		KEEP(*(.Vectors))
-		*(.text*)
-
-		KEEP(*(.init))
-		KEEP(*(.fini))
-
-		/* .ctors */
-		*crtbegin.o(.ctors)
-		*crtbegin?.o(.ctors)
-		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
-		*(SORT(.ctors.*))
-		*(.ctors)
-
-		/* .dtors */
- 		*crtbegin.o(.dtors)
- 		*crtbegin?.o(.dtors)
- 		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- 		*(SORT(.dtors.*))
- 		*(.dtors)
-
-		*(.rodata*)
-
-		*(.eh_frame*)
-		. = ALIGN(4);
-	} > FLASH
-    
-
-	.ARM.extab : 
-	{
-		*(.ARM.extab* .gnu.linkonce.armextab.*)
-		. = ALIGN(4);
-	} > FLASH
-
-	__exidx_start = .;
-	.ARM.exidx :
-	{
-		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
-		. = ALIGN(4);
-	} > FLASH
-	__exidx_end = .;
-
-	__etext = .;
-		
-	.data : AT (__etext)
-	{
-		__data_start__ = .;
-		*(vtable)
-		*(.data*)
-
-		. = ALIGN(4);
-		/* preinit data */
-		PROVIDE_HIDDEN (__preinit_array_start = .);
-		KEEP(*(.preinit_array))
-		PROVIDE_HIDDEN (__preinit_array_end = .);
-
-		. = ALIGN(4);
-		/* init data */
-		PROVIDE_HIDDEN (__init_array_start = .);
-		*(SORT(.init_array.*))
-		KEEP(*(.init_array))
-		PROVIDE_HIDDEN (__init_array_end = .);
-
-
-		. = ALIGN(4);
-		/* finit data */
-		PROVIDE_HIDDEN (__fini_array_start = .);
-		*(SORT(.fini_array.*))
-		KEEP(*(.fini_array))
-		PROVIDE_HIDDEN (__fini_array_end = .);
-
-		*(.jcr)
-		. = ALIGN(4);
-		/* All data end */
-		__data_end__ = .;
-
-	} > RAM
-
-	.bss :
-	{
-		. = ALIGN(4);
-		__bss_start__ = .;
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);
-		__bss_end__ = .;
-	} > RAM
-	
-	.heap (COPY):
-	{
-		__end__ = .;
-		end = __end__;
-		*(.heap*)
-		__HeapLimit = .;
-	} > RAM
-
-	/* .stack_dummy section doesn't contains any symbols. It is only
-	 * used for linker to calculate size of stack sections, and assign
-	 * values to stack symbols later */
-	.stack_dummy (COPY):
-	{
-		*(.stack*)
-	} > RAM
-
-	/* Set stack top to end of RAM, and stack limit move down by
-	 * size of stack_dummy section */
-	__StackTop = ORIGIN(RAM) + LENGTH(RAM);
-	__StackLimit = __StackTop - SIZEOF(.stack_dummy);
-	PROVIDE(__stack = __StackTop);
-	
-	/* Check if data + heap + stack exceeds RAM limit */
-	ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-