Skip to content

L
libvncserver
Commit d77d118d authored by runge's avatar runge
Browse files
Options

x11vnc: -overlay to fix colors with Sun 8+24 overlay visuals. -sid option.

parent 6460243e
Show whitespace changes
Inline Side-by-side
Showing with 716 additions and 357 deletions
ChangeLog
View file @ d77d118d
2004-08-15 Karl Runge <runge@karlrunge.com>
* x11vnc: -overlay to fix colors with Sun 8+24 overlay visuals.
* -sid option.
2004-08-03 Karl Runge <runge@karlrunge.com>
* x11vnc: manpage and README
* fix XKBlib.h detection on *BSD
......
x11vnc/ChangeLog
View file @ d77d118d
2004-08-15 Karl Runge <runge@karlrunge.com>
* -overlay option to fix color problems on Sun machines with 8+24
and 24+8 overlay visuals, uses Solaris XReadScreen().
* expose -sid option (shifted -id windowid) to allow explicit
wrapping of XGetImage, etc for -overlay
* fix misc bugs: missing var types, hardwired blackouts sizes,
subwin desktop name crash.
2004-08-03 Karl Runge <runge@karlrunge.com>
* add man page x11vnc.1 autogenerated from x11vnc -help; tweak
help output a little bit. Adjust autoconf to pick up manpage.
......
x11vnc/README
View file @ d77d118d
x11vnc README file Date: Tue Aug 3 21:54:01 EDT 2004
x11vnc README file Date: Sun Aug 15 16:30:33 EDT 2004
The following information is taken from these URLs:
......@@ -301,12 +301,29 @@ vncviewer -via $host localhost:0 # must be TightVNC vncviewer.
You can now run it via typing "x11vnc", "x11vnc -help", "x11vnc -nap
-display :0", etc.
Note: Currently gcc is required to build libvncserver. In some cases
it will build with non-gcc compilers, but the resulting binary often
fails to run properly.
Building on Solaris: Depending on your version of Solaris (or other
Unix OS), the jpeg and/or zlib libraries may be in non-standard places
(e.g. /usr/local). Note: if configure cannot find these two libraries
then TightVNC support will be disabled, and you don't want that! Here
is a build script that indicates one way to pass this information to
the libvncserver configuration:
(e.g. /usr/local, /usr/sfw, /opt/sfw, etc).
Note: If configure cannot find these two libraries then TightVNC
support will be disabled, and you don't want that! (the TightVNC
encoding gives very good compression and performance, even makes a
difference over a LAN)
libjpeg is included in Solaris 9 and later (/usr/sfw/include and
/usr/sfw/lib), and zlib in Solaris 8 and later (/usr/include and
/usr/lib). To get the source for these libraries: libjpeg is available
at [19]ftp://ftp.uu.net/graphics/jpeg/ and zlib at
[20]http://www.gzip.org/zlib/. See also
[21]http://www.sunfreeware.com/ for Solaris binary packages of these
libraries.
Here is a build script that indicates one way to pass the library
locations information to the libvncserver configuration:
#!/bin/sh
# Build script for Solaris, etc, with, gcc, libjpeg and libz in
......@@ -356,8 +373,8 @@ ls -l ./x11vnc/x11vnc
referring to LIBVNCSERVER_HAVE_XKEYBOARD in rfb/rfbconfig.h after
configure has been run. Alternatively, one could put #undef
LIBVNCSERVER_HAVE_XKEYBOARD after the rfb/rfb.h include in the
x11vnc/x11vnc.c file. We are working to fix this in the configure
script.
x11vnc/x11vnc.c file. (This problem has been fixed as of x11vnc 0.6.2
(Aug/2004))
_________________________________________________________________
Some Notes:
......@@ -370,7 +387,7 @@ ls -l ./x11vnc/x11vnc
suggest using xsetroot, dtstyle or similar utility to set a solid
background while using x11vnc.
I also find the [19]tightvnc encoding gives the best response for my
I also find the [22]tightvnc encoding gives the best response for my
usage (Unix <-> Unix over cable modem). One needs a tightvnc-aware
vncviewer to take advantage of this encoding.
......@@ -386,10 +403,10 @@ ls -l ./x11vnc/x11vnc
option.
Options: x11vnc has (far too) many features that may be activated
via its [20]command line options. Useful options are -nap to use fewer
via its [23]command line options. Useful options are -nap to use fewer
resources (it sleeps more between polls when activity is low) and
-rfbauth passwd-file to use VNC password protection (the vncpasswd or
storepasswd programs, or the x11vnc [21]-storepasswd option can be
storepasswd programs, or the x11vnc [24]-storepasswd option can be
used to create the password file).
Algorithm: How does x11vnc do it? Rather brute-forcedly: it
......@@ -419,7 +436,7 @@ ls -l ./x11vnc/x11vnc
display the viewer on a different machine!
SunRay notes: You can run x11vnc on your (connected or disconnected)
[22]SunRay session (Please remember to use -nap and maybe -wait 200 to
[25]SunRay session (Please remember to use -nap and maybe -wait 200 to
avoid being a resource hog! It also helps a bit to have a solid
background color). You have to know the name of the machine your
SunRay session X server is running on. You also need to know the X11
......@@ -476,7 +493,9 @@ ls -l ./x11vnc/x11vnc
* Somewhat surprisingly, the X11 mouse (cursor) shape is write-only
and cannot be queried from the X server. So in x11vnc the cursor
shape stays fixed at an arrow. (see the -mouseX option, however,
for a partial hack for the root window).
for a partial hack for the root window). Also, on Solaris using
the SUN_OVL overlay extension, x11vnc can show the correct mouse
cursor when the -overlay is also supplied.
* Audio from applications is of course not redirected (separate
redirectors do exist, e.g. esd). The XBell() "beeps" will work if
the X server supports the XKEYBOARD extension. (Note that on
......@@ -486,190 +505,191 @@ ls -l ./x11vnc/x11vnc
Evidently a timing related bug and difficult to reproduce...
* Using -threads can expose some bugs in libvncserver.
Please feel free to [23]contact me if you have any questions,
Please feel free to [26]contact me if you have any questions,
problems, or comments about x11vnc, etc.
_________________________________________________________________
x11vnc FAQ:
[24]Q-1: I can't get x11vnc to start up. It says "XOpenDisplay failed
[27]Q-1: I can't get x11vnc to start up. It says "XOpenDisplay failed
((null))" or "Xlib: connection to ":0.0" refused by server". What do I
need to do?
[25]Q-2: I can't get x11vnc and/or libvncserver to compile.
[28]Q-2: I can't get x11vnc and/or libvncserver to compile.
[26]Q-3: Where can I get a precompiled x11vnc binary for my Operating
[29]Q-3: Where can I get a precompiled x11vnc binary for my Operating
System?
[27]Q-4: How can I see all of x11vnc's command line options and
[30]Q-4: How can I see all of x11vnc's command line options and
documentation on how to use them?
[28]Q-5: I don't like typing arcane command line options every time I
[31]Q-5: I don't like typing arcane command line options every time I
start x11vnc. What can I do? Is there a config file?
[29]Q-6: Why does x11vnc exit as soon as the VNC viewer disconnects?
[32]Q-6: Why does x11vnc exit as soon as the VNC viewer disconnects?
And why doesn't it allow more than one VNC viewer to connect at the
same time?
[30]Q-7: I have two separate machine displays in front of me, one
[33]Q-7: I have two separate machine displays in front of me, one
Windows the other X11: can I use x11vnc in combination with Win2VNC in
dual-screen mode to pass the keystrokes and mouse motions to the X11
display?
[31]Q-8: I am running Win2VNC on my windows machine and trying to
[34]Q-8: I am running Win2VNC on my windows machine and trying to
create a dual-screen mode with my second display by running x11vnc
-nofb. Whenever I initiate the connection Win2VNC quickly disconnects
and x11vnc says something like: rfbProcessClientNormalMessage: read:
Connection reset by peer
[32]Q-9: The X display I run x11vnc on is only 8bpp PseudoColor (only
256 distinct colors). x11vnc starts out OK, but after a while the
colors are incorrect in certain windows.
[35]Q-9: The X display I run x11vnc on is only 8 bits per pixel (bpp)
PseudoColor (i.e. only 256 distinct colors). The x11vnc colors may
start out OK, but after a while the colors are incorrect in certain
windows.
[33]Q-10: Color problems: I have an X display that has nice
"overlay-like" visuals of multiple color depths. E.g. there are both
depth 8 and 24 visuals available. Why are some of the colors messed up
in x11vnc?
[36]Q-10: Color problems: Why are the colors for some of the windows
messed up in x11vnc? BTW, I have an X display that has nice overlay
visuals of multiple color depths. E.g. there are both depth 8 and 24
visuals available at the same time.
[34]Q-11: How do I figure out the window id to supply to the -id
[37]Q-11: How do I figure out the window id to supply to the -id
windowid option?
[35]Q-12: Why don't menus or other transient windows come up when I am
[38]Q-12: Why don't menus or other transient windows come up when I am
using the -id windowid option to view a single application window?
[36]Q-13: Can I use x11vnc to view and interact with an Xterminal
[39]Q-13: Can I use x11vnc to view and interact with an Xterminal
(e.g. NCD) that is not running UNIX and so x11vnc cannot be run on it
directly?
[37]Q-14: Can I make x11vnc more quiet and also go into the background
[40]Q-14: Can I make x11vnc more quiet and also go into the background
after starting up?
[38]Q-15: Can I limit which machines incoming VNC clients can connect
[41]Q-15: Can I limit which machines incoming VNC clients can connect
from?
[39]Q-16: How do I build x11vnc/libvncserver with libwrap
[42]Q-16: How do I build x11vnc/libvncserver with libwrap
(tcp_wrappers) support?
[40]Q-17: Can I prompt the user at the local X display whether the
[43]Q-17: Can I prompt the user at the local X display whether the
incoming VNC client should be accepted or not? Can I decide to make
some clients view-only? How about running an arbitrary program to make
the decisions?
[41]Q-18: How do I create a VNC password for use with x11vnc?
[44]Q-18: How do I create a VNC password for use with x11vnc?
[42]Q-19: How can I tunnel my connection to x11vnc via an encrypted
[45]Q-19: How can I tunnel my connection to x11vnc via an encrypted
SSH channel between two Unix machines?
[43]Q-20: How can I tunnel my connection to x11vnc via an encrypted
[46]Q-20: How can I tunnel my connection to x11vnc via an encrypted
SSH channel from Windows using an SSH client like Putty?
[44]Q-21: Does x11vnc support Unix usernames and passwords? Can I
[47]Q-21: Does x11vnc support Unix usernames and passwords? Can I
further limit the set of Unix usernames who can connect to the VNC
desktop?
[45]Q-22: Can I have two passwords for VNC viewers, one for full
[48]Q-22: Can I have two passwords for VNC viewers, one for full
access and the other for view-only access to the display?
[46]Q-23: I use a screen-lock when I leave my workstation (e.g.
[49]Q-23: I use a screen-lock when I leave my workstation (e.g.
xscreensaver or xlock). When I remotely access my workstation desktop
via x11vnc I can unlock the desktop fine, but I am worried people will
see my activities on the physical monitor. What can I do to prevent
this, or at least make it more difficult?
[47]Q-24: Can I have x11vnc automatically lock the screen when I
[50]Q-24: Can I have x11vnc automatically lock the screen when I
disconnect the VNC viewer?
[48]Q-25: Are reverse connections (i.e. the VNC server connecting to
[51]Q-25: Are reverse connections (i.e. the VNC server connecting to
the VNC viewer) using "vncviewer -listen" and vncconnect(1) supported?
[49]Q-26: Sometimes when a VNC viewer dies abruptly, x11vnc also dies
[52]Q-26: Sometimes when a VNC viewer dies abruptly, x11vnc also dies
with the error message like: "Broken pipe". I'm using the -forever
mode and I want x11vnc to keep running.
[50]Q-27: How can I use x11vnc to connect to an X login screen like
xdm, GNOME gdmgreeter, KDE kdm, or CDE dtlogin?
[53]Q-27: How can I use x11vnc to connect to an X login screen like
xdm, GNOME gdm, KDE kdm, or CDE dtlogin?
[51]Q-28: Can I run x11vnc out of inetd(1)?
[54]Q-28: Can I run x11vnc out of inetd(1)?
[52]Q-29: How do I make x11vnc work with the Java VNC viewer applet in
[55]Q-29: How do I make x11vnc work with the Java VNC viewer applet in
a web browser?
[53]Q-30: Why isn't the mouse cursor shape (the little icon shape
[56]Q-30: Why isn't the mouse cursor shape (the little icon shape
where the mouse pointer is) correct as I move from window to window?
[54]Q-31: Why does the mouse arrow just stay in one corner in my
[57]Q-31: Why does the mouse arrow just stay in one corner in my
vncviewer, whereas my cursor (that does move) is just a dot?
[55]Q-32: Can I take advantage of the TightVNC extension to the VNC
[58]Q-32: Can I take advantage of the TightVNC extension to the VNC
protocol where Cursor Positions Updates are sent back to all connected
clients (i.e. passive viewers can see the mouse cursor being moved
around by another viewer)?
[56]Q-33: Is it possible to swap the mouse buttons (e.g. left-handed
[59]Q-33: Is it possible to swap the mouse buttons (e.g. left-handed
operation), or arbitrarily remap them? How about mapping button clicks
to keystrokes, e.g. to partially emulate Mouse wheel scrolling?
[57]Q-34: When I drag windows around with the mouse or scroll up and
[60]Q-34: When I drag windows around with the mouse or scroll up and
down things really bog down (unless I do the drag in a single, quick
motion). Is there anything to do to improve things?
[58]Q-35: I have lots of memory, but why does x11vnc fail with
[61]Q-35: I have lots of memory, but why does x11vnc fail with
shmget: No space left on device or Minor opcode of failed
request: 1 (X_ShmAttach)?
[59]Q-36: How can I make x11vnc use less system resources?
[62]Q-36: How can I make x11vnc use less system resources?
[60]Q-37: How can I make x11vnc use MORE system resources?
[63]Q-37: How can I make x11vnc use MORE system resources?
[61]Q-38: I use x11vnc over a slow link with high latency (i.e. dialup
[64]Q-38: I use x11vnc over a slow link with high latency (e.g. dialup
modem), is there anything I can do to speed things up?
[62]Q-39: How can I get my AltGr and Shift modifiers to work between
[65]Q-39: How can I get my AltGr and Shift modifiers to work between
keyboards for different languages?
[63]Q-40: When I try to type a "<" (i.e. less than) instead I get ">"
[66]Q-40: When I try to type a "<" (i.e. less than) instead I get ">"
(i.e. greater than)! Strangely, typing ">" works OK!!
[64]Q-41: I'm using an "international" keyboard (e.g. German "de", or
[67]Q-41: I'm using an "international" keyboard (e.g. German "de", or
Danish "dk") and the -modtweak mode works well if the VNC viewer is
run on a Unix/Linux machine with a similar keyboard. But if I run the
VNC viewer on Unix/Linux with a different keyboard (e.g. "us") or
Windows with any keyboard, I can't type some keys like: "@", "$", "<",
">", etc. How can I fix this?
[65]Q-42: When typing I sometimes get double, triple, or more of my
[68]Q-42: When typing I sometimes get double, triple, or more of my
keystrokes repeated. I'm sure I only typed them once, what can I do?
[66]Q-43: The machine where I run x11vnc has an AltGr key, but the
[69]Q-43: The machine where I run x11vnc has an AltGr key, but the
local machine where I run the VNC viewer does not. Is there a way I
can map a local unused key to send an AltGr? How about a Compose key
as well?
[67]Q-44: I have a Sun machine I run x11vnc on. Its Sun keyboard has
[70]Q-44: I have a Sun machine I run x11vnc on. Its Sun keyboard has
just one Alt key labelled "Alt" and two Meta keys labelled with little
diamonds. The machine where I run the VNC viewer only has Alt keys.
How can I send a Meta keypress? (e.g. emacs needs this)
[68]Q-45: Can I map a keystroke to a mouse button click on the remote
[71]Q-45: Can I map a keystroke to a mouse button click on the remote
machine?
[69]Q-46: The remote display is larger (in number of pixels) than the
[72]Q-46: The remote display is larger (in number of pixels) than the
local display I am running the vncviewer on. I don't like the
vncviewer scrollbars, what I can do?
[70]Q-47: Does x11vnc support server-side framebuffer scaling? (E.g.
[73]Q-47: Does x11vnc support server-side framebuffer scaling? (E.g.
to make the desktop smaller).
[71]Q-48: Does x11vnc work with Xinerama? (i.e. multiple monitors
[74]Q-48: Does x11vnc work with Xinerama? (i.e. multiple monitors
joined together to form one big, single screen).
[72]Q-49: Can I use x11vnc on a multi-headed display that is not
[75]Q-49: Can I use x11vnc on a multi-headed display that is not
Xinerama (i.e. separate screens :0.0, :0.1, ... for each monitor)?
[73]Q-50: Why is the view in my VNC viewer completely black? Or why is
[76]Q-50: Why is the view in my VNC viewer completely black? Or why is
everything flashing around randomly?
[74]Q-51: I use Linux Virtual Consoles (VC's) to implement 'Fast User
[77]Q-51: I use Linux Virtual Consoles (VC's) to implement 'Fast User
Switching' between users' sessions (e.g. Betty is on Ctrl-Alt-F7,
Bobby is on Ctrl-Alt-F8, and Sid is on Ctrl-Alt-F1: they use those
keystrokes to switch between their sessions). How come the view in a
......@@ -677,13 +697,13 @@ ls -l ./x11vnc/x11vnc
otherwise all messed up unless the X session x11vnc is attached to is
in the active VC?
[75]Q-52: Does the Clipboard/Selection get transferred between the
[78]Q-52: Does the Clipboard/Selection get transferred between the
vncviewer and the X display?
[76]Q-53: Why don't I hear the "Beeps" in my X session (e.g. when
[79]Q-53: Why don't I hear the "Beeps" in my X session (e.g. when
typing tput bel in an xterm)?
[77]Q-54: I am using x11vnc where my local machine has "popup/hidden
[80]Q-54: I am using x11vnc where my local machine has "popup/hidden
taskbars" (e.g. GNOME or MacOS X) and the remote display where x11vnc
runs also has "popup/hidden taskbars" (e.g. GNOME). When I move the
mouse to the edge of the screen where the popups happen, the taskbars
......@@ -700,7 +720,7 @@ ls -l ./x11vnc/x11vnc
specify it. Nearly always the correct value will be ":0"
For the latter error, you need to set up the X11 permissions. See the
xauth(1), Xsecurity(1), and xhost(1) man pages. For example, you may
xauth(1), Xsecurity(7), and xhost(1) man pages. For example, you may
need to set your XAUTHORITY environment variable to point to the
correct cookie file (e.g. /home/joe/.Xauthority or
/var/lib/xdm/authdir/authfiles/A:0-nRySEi), or simply be sure you run
......@@ -774,18 +794,18 @@ ls -l ./x11vnc/x11vnc
Q-3: Where can I get a precompiled x11vnc binary for my Operating
System?
Hopefully the [78]build steps above and [79]FAQ provide enough info
Hopefully the [81]build steps above and [82]FAQ provide enough info
for a painless compile for most environments. Please report problems
with the x11vnc configure, make, etc. on your system (if your system
is known to compile other GNU packages successfully).
There are precompiled x11vnc binaries made by other groups available
at the following locations:
Debian: [80]http://packages.debian.org/x11vnc
Debian: (.deb) [83]http://packages.debian.org/x11vnc
Slackware: [81]http://www.linuxpackages.net/ Redhat/Fedora:
[82]http://dag.wieers.com/packages/x11vnc/ wwexptools:
[83]http://www.bell-labs.com/project/wwexptools/packages.html The last
Slackware: (.tgz) [84]http://www.linuxpackages.net/ Redhat/Fedora:
(.rpm) [85]http://dag.wieers.com/packages/x11vnc/ wwexptools: (.tgz)
[86]http://www.bell-labs.com/project/wwexptools/packages.html The last
one, wwexptools, provides a variety of Unix binaries (Linux, Solaris,
HP-UX, Irix, ...) with the intent of being compatible on a wide range
of OS releases. Find x11vnc at that link and select 'download info'.
......@@ -808,7 +828,7 @@ ls -l ./x11vnc/x11vnc
Q-4: How can I see all of x11vnc's command line options and
documentation on how to use them?
Run: x11vnc -help The output is listed [84]here as well.
Run: x11vnc -help The output is listed [87]here as well.
Q-5: I don't like typing arcane command line options every time I
start x11vnc. What can I do? Is there a config file?
......@@ -849,7 +869,7 @@ display :0
Recommended additional safety measures include using ssh (see above)
or a VPN to authenticate and encrypt the viewer connections or to at
least use the -rfbauth passwd-file [85]option to use VNC password
least use the -rfbauth passwd-file [88]option to use VNC password
protection.
Q-7: I have two separate machine displays in front of me, one Windows
......@@ -862,16 +882,16 @@ display :0
secondary display (X11). Then start up Win2VNC on the primary display
(Windows) referring it to the secondary display.
This will also work X11 to X11 using [86]x2vnc, however you would
This will also work X11 to X11 using [89]x2vnc, however you would
probably just want to avoid VNC and use x2x for that.
For reference, here are some links to Win2VNC-like programs for
multiple monitor setups:
* [87]Original Win2VNC
* [88]Enhanced Win2VNC and [89]sourceforge link
* [90]x2vnc
* [91]x2x also [92]here
* [93]zvnc (MorphOS)
* [90]Original Win2VNC
* [91]Enhanced Win2VNC and [92]sourceforge link
* [93]x2vnc
* [94]x2x also [95]here
* [96]zvnc (MorphOS)
All of them (except x2x) will work with x11vnc.
......@@ -882,81 +902,114 @@ display :0
Connection reset by peer
Is the default visual of the X display you run x11vnc on low color
(e.g. 8bpp PseudoColor)? (you can run xdpyinfo to check). There seems
to be a bug in Win2VNC in that it cannot deal correctly with colormaps
(PseudoColor is the most common example of a visual with a colormap).
(e.g. 8 bit per pixel PseudoColor)? (you can run xdpyinfo to check).
There seems to be a bug in Win2VNC in that it cannot deal correctly
with colormaps (PseudoColor is the most common example of a visual
with a colormap).
If so, there are a couple options. 1) Can you set the default visual
on your display to be depth 24 TrueColor? Sun machines often have 8+24
overlay visuals, and you can make the default visual depth 24
TrueColor (see fbconfig(1) and Xsun(1)). 2) As of Feb/2004, in the
libvncserver CVS, x11vnc has the -visual option to allow you to force
the framebuffer visual to whatever you want. This option provides a
convenient workaround for the Win2VNC bug:
the framebuffer visual to whatever you want (this usually messes up
the colors unless you are very careful). In this case, the option
provides a convenient workaround for the Win2VNC bug:
x11vnc -nofb -visual TrueColor -display :0 ...
So the visual will be set to 8bpp TrueColor and Win2VNC can handle
this. Since Win2VNC does not use the framebuffer there should be no
problems in doing this.
Q-9: The X display I run x11vnc on is only 8bpp PseudoColor (only 256
distinct colors). x11vnc starts out OK, but after a while the colors
are incorrect in certain windows.
this. Since Win2VNC does not use the framebuffer data there should be
no problems in doing this.
Q-9: The X display I run x11vnc on is only 8 bits per pixel (bpp)
PseudoColor (i.e. only 256 distinct colors). The x11vnc colors may
start out OK, but after a while the colors are incorrect in certain
windows.
Use the -flashcmap option to have x11vnc watch for changes in the
colormap, and propagate those changes back to connected clients. This
can be slow (since the whole screen must be updated over the network
whenever the colormap changes). This flashing colormap behavior often
happens if an application installs its own private colormap when the
mouse is in its window. "netscape -install" is a well-known historical
example of this. Consider reconfiguring the system to 16 bpp or depth
24 TrueColor if at all possible.
Also note that in some rare cases the -notruecolor option has
corrected colors on 8bpp displays. The red, green, and blue masks were
non-zero in 8bpp PseudoColor on an obscure setup, and this option
corrected the problems.
Q-10: Color problems: Why are the colors for some of the windows
messed up in x11vnc? BTW, I have an X display that has nice overlay
visuals of multiple color depths. E.g. there are both depth 8 and 24
visuals available at the same time.
Use the -flashcmap to have x11vnc watch for changes in the colormap,
and propagate those changes back to connected clients. This can be
slow. The incorrect colors often happens if an application installs
its own private colormap when the mouse is in its window. netscape
-install is a well-known historical example of this.
You may want to review the [97]previous question regarding 8 bpp
PseudoColor.
Q-10: Color problems: I have an X display that has nice "overlay-like"
visuals of multiple color depths. E.g. there are both depth 8 and 24
visuals available. Why are some of the colors messed up in x11vnc?
First off, try the (rather slow) -flashcmap option just to be sure
your color problem isn't simply due to x11vnc not following the
changing 256 element colormap. The -notruecolor option has also been
known to resolve some color problems on 8bpp displays.
If that doesn't help, run xdpyinfo to see what the default visual is.
Does it have a depth of 8? If it does, can you possibly re-configure
your X server to make the depth 24 visual the default? If you can do
it, this will save you a lot of grief WRT colors and x11vnc (and for
general usage too). I do this on an old Sparcstation 20 with SX
graphics
If that isn't the problem, run xdpyinfo to see what the default visual
is. Does it have a depth of 8? If it does, can you possibly
re-configure your X server to make the depth 24 visual the default? If
you can do it, this will save you a lot of grief WRT colors and x11vnc
(and for general usage too!). Here is how I do this on an old
Sparcstation 20 running Solaris 9 with SX graphics
xinit -- -dev /dev/fb defclass TrueColor defdepth 24
and it works nicely (to log into console from the dtlogin window,
select "Options -> Command Line Login", then login and enter the above
command). A more permanent and convenient option is to put a line
like:
:0 Local local_uid@console root /usr/openwin/bin/Xsun -dev /dev/fb defclass Tr
ueColor defdepth 24
and it works nicely (note: to log into console from the dtlogin
window, select "Options -> Command Line Login", then login and enter
the above command). If you have root permission, a more permanent and
convenient option is to put a line like:
:0 Local local_uid@console root /usr/openwin/bin/Xsun -dev /dev/fb defclass
TrueColor defdepth 24
in /etc/dt/config/Xservers (see /usr/dt/config/Xservers).
Another option is if the system with overlay visuals is a Sun system
running Solaris you can use the -overlay x11vnc option (Aug/2004) to
have x11vnc use the Solaris XReadScreen(3X11) function to poll the
"true view" of the whole screen at depth 24 TrueColor. This is useful
for Legacy applications (older versions of Cadence CAD apps are
mentioned by x11vnc users) that require the default depth be 8bpp, or
will use a 8bpp visual even if depth 24 visuals are available, and so
the default depth workaround described in the previous paragraph is
not sufficient.
Misc. notes on -overlay mode: An amusing by-product of -overlay mode
is that mouse cursor shape (e.g. use -X or -mouse options) is correct.
The -overlay mode may be somewhat slower than normal mode due to the
extra framebuffer manipulations that must be performed. Also, there is
a bug in that for some popup menus, the windows they overlap will have
painting problems while the popup is up (a workaround is to disable
SaveUnders by passing -su to Xsun, e.g. in your
/etc/dt/config/Xservers file).
Still not working? Run xwininfo on the application with the messed up
colors to verify that the depth of its visual is different from the
default visual depth (gotten from xdpyinfo). One possible workaround
in this case is to use the -id option to point x11vnc at the
application window itself. If the application is complicated this may
not be acceptable, and may even crash x11vnc (but not the
application).
application window itself. If the application is complicated (lots of
toplevel windows and popup menus) this may not be acceptable, and may
even crash x11vnc (but not the application).
It is theoretically possible to solve this problem (see xwd(1) for
example), but it does not seem trivial or sufficiently fast for x11vnc
to be able to do.
It is theoretically possible to solve this problem in general (see
xwd(1) for example), but it does not seem trivial or sufficiently fast
for x11vnc to be able to do so in real time. Fortunately the -overlay
option works for Solaris machines with overlay visuals where most of
this problem occurs.
Q-11: How do I figure out the window id to supply to the -id windowid
option?
Run the xwininfo program in a terminal. It will ask you to click on
the desired application window. After clicking, it will print out much
information, including the window id.
information, including the window id. Also, the visual and depth of
the window printed out is often useful in debugging x11vnc
[98]problems.
Note that some VNC viewers will have problems rendering screens that
have a width that is not a multiple of 4. Try to manually adjust the
window width before starting x11vnc -id ....
When using -id windowid, note that some VNC viewers will have problems
rendering screens that have a width that is not a multiple of 4. Try
to manually adjust the window width before starting x11vnc -id ....
Q-12: Why don't menus or other transient windows come up when I am
using the -id windowid option to view a single application window?
......@@ -968,10 +1021,10 @@ ueColor defdepth 24
clipping or obscuring it. See the XGetImage man page for more details.
If things are not working and you still want to do the single window
polling, feel free to ask for a version of x11vnc that has an
experimental -sid windowid option ("shifted" windowid). x11vnc is
known to crash under both -id and -sid, so both modes are still
experimental.
polling, try the -sid windowid option ("shifted" windowid).
x11vnc is known to crash under both -id and -sid, so both modes are
still experimental.
Q-13: Can I use x11vnc to view and interact with an Xterminal (e.g.
NCD) that is not running UNIX and so x11vnc cannot be run on it
......@@ -1029,7 +1082,7 @@ ueColor defdepth 24
is "vnc", e.g.:
vnc: 192.168.100.3 .example.com
Note that if you run x11vnc out of [94]inetd you do not need to build
Note that if you run x11vnc out of [99]inetd you do not need to build
x11vnc with libwrap support because the /usr/sbin/tcpd reference in
/etc/inetd.conf handles the tcp_wrappers stuff.
......@@ -1073,7 +1126,7 @@ ueColor defdepth 24
program to prompt the user whether the client should be accepted or
not. This requires that you have xmessage installed and available via
PATH. In case it is not already on your system, the xmessage program
is available at [95]ftp://ftp.x.org/
is available at [100]ftp://ftp.x.org/
To include view-only decisions for the external commands, prefix the
command something like this: "yes:0,no:*,view:3 mycommand ..." This
......@@ -1112,7 +1165,7 @@ elif [ $rc = 4 ]; then
fi
exit 1
Stefan Radman has written a nice dtksh script [96]dtVncPopup for use
Stefan Radman has written a nice dtksh script [101]dtVncPopup for use
in CDE environments to do the same sort of thing. Information on how
to use it is found at the top of the file. He encourages you to
provide feedback to him to help improve the script.
......@@ -1147,13 +1200,14 @@ exit 1
out for the command winding up in your shell's history file (history
-c is often a way to clear it).
x11vnc also has the [97]-passwdfile and -passwd/-viewpasswd plain text
(i.e. not obscured like the -rfbauth VNC passwords) password options.
x11vnc also has the [102]-passwdfile and -passwd/-viewpasswd plain
text (i.e. not obscured like the -rfbauth VNC passwords) password
options.
Q-19: How can I tunnel my connection to x11vnc via an encrypted SSH
channel between two Unix machines?
See the description earlier on this page on [98]how to tunnel VNC via
See the description earlier on this page on [103]how to tunnel VNC via
SSH from Unix to Unix. A number of ways are described along with some
issues you may encounter.
......@@ -1162,8 +1216,8 @@ exit 1
Q-20: How can I tunnel my connection to x11vnc via an encrypted SSH
channel from Windows using an SSH client like Putty?
[99]Above we described how to tunnel VNC via SSH from Unix to Unix. To
do this from Windows using Putty it would go something like this:
[104]Above we described how to tunnel VNC via SSH from Unix to Unix.
To do this from Windows using Putty it would go something like this:
* In the Putty dialog window under 'Session' enter the hostname or
IP number of the Unix machine with display to be viewed.
* Make sure the SSH protocol is selected and the server port is
......@@ -1194,7 +1248,7 @@ exit 1
you'll need to do a second login (ssh or rsh) to the workstation
machine 'otherhost' and then start up x11vnc on it.
As discussed [100]above another option is to first start the VNC
As discussed [105]above another option is to first start the VNC
viewer in "listen" mode, and then launch x11vnc with the "-connection
localhost" option to establish the reverse connection. In this case a
Remote port redirection (not Local) is needed for port 5500 instead of
......@@ -1215,7 +1269,7 @@ exit 1
connection to make it appear to emanate from the local machine. As
discussed above, ssh is useful for this: ssh -l username -L
5900:localhost:5900 hostname ... See the ssh wrapper scripts mentioned
[101]elsewhere on this page. Of course a malicious user could allow
[106]elsewhere on this page. Of course a malicious user could allow
other users to get in through his channel, but that is a problem with
every method. Another thing to watch out for is a malicious user on
the viewer side (where ssh is running) trying to sneak in through the
......@@ -1291,7 +1345,7 @@ exit 1 # reject it
In any event, as of Jun/2004 there is an experimental utility to make
it more difficult for nosey people to see your x11vnc activities. The
source for it is [102]blockdpy.c The idea behind it is simple (but
source for it is [107]blockdpy.c The idea behind it is simple (but
obviously not bulletproof): when a VNC client attaches to x11vnc put
the display monitor in the DPMS "off" state, if the DPMS state ever
changes immediately start up the screen-lock program. The x11vnc user
......@@ -1360,11 +1414,11 @@ xprop -root -f VNC_CONNECT 8s -set VNC_CONNECT "$1"
Currently (Apr/2004) the above fix only works for BSD signal systems
(Linux, FreeBSD, ...) For SYSV systems there is a workaround in my
[103]x11vnc.c file. It also has an option -sigpipe exit to have x11vnc
[108]x11vnc.c file. It also has an option -sigpipe exit to have x11vnc
clean up and exit upon receiving SIGPIPE.
Q-27: How can I use x11vnc to connect to an X login screen like xdm,
GNOME gdmgreeter, KDE kdm, or CDE dtlogin?
GNOME gdm, KDE kdm, or CDE dtlogin?
One time only. If the X login screen is running and you just want to
connect to it once:
......@@ -1428,7 +1482,7 @@ xprop -root -f VNC_CONNECT 8s -set VNC_CONNECT "$1"
If you do not want to deal with the display manager startup scripts,
here is a kludgey script that can be run manually or out of a boot
file like rc.local. [104]x11vnc_loop It will need some local
file like rc.local. [109]x11vnc_loop It will need some local
customization before running. Because the XAUTHORITY auth file must be
guessed by this script, use of the display manager script above is
preferred.
......@@ -1545,11 +1599,16 @@ mp/x11vnc_sh.log
build up a table of cursors for the windows it sees, perhaps using a
user supplied hints file, but that has not been explored yet.
Also note that as of Aug/2004 in the libvncserver CVS, on Solaris
using the SUN_OVL overlay extension, x11vnc can show the correct mouse
cursor when the -overlay is also supplied. (-overlay has some other
problems however, and can be slower).
Q-31: Why does the mouse arrow just stay in one corner in my
vncviewer, whereas my cursor (that does move) is just a dot?
This default takes advantage of a [105]tightvnc extension that allows
specifying a cursor shape for the local VNC viewer. You may disable it
This default takes advantage of a [110]tightvnc extension that allows
specifying a cursor image for the local VNC viewer. You may disable it
with the -nocursor option to x11vnc if your viewer does not have this
extension.
......@@ -1645,7 +1704,7 @@ mp/x11vnc_sh.log
19/03/2004 10:10:58 error creating tile-row shm for len=4
19/03/2004 10:10:58 reverting to single_copytile mode
Here is a shell script [106]shm_clear to list and prompt for removal
Here is a shell script [111]shm_clear to list and prompt for removal
of your unattached shm segments (attached ones are skipped). I use it
while debugging x11vnc (I use shm_clear -y to assume "yes" for each
prompt). If x11vnc is regularly not cleaning up its shm segments,
......@@ -1683,7 +1742,7 @@ ied)
-fs 1.0 knocks it down to 2). If you are having much trouble with shm
segments, consider disabling shm completely via the -noshm option.
Performance will be somewhat degraded but when done over local machine
sockets it should be acceptable (see an [107]earlier question
sockets it should be acceptable (see an [112]earlier question
discussing -noshm).
Q-36: How can I make x11vnc use less system resources?
......@@ -1707,7 +1766,7 @@ ied)
the x11vnc -id option) can be streamed over a LAN or wireless at a
reasonable frame rate.
Q-38: I use x11vnc over a slow link with high latency (i.e. dialup
Q-38: I use x11vnc over a slow link with high latency (e.g. dialup
modem), is there anything I can do to speed things up?
Some things you might want to experiment with (most of which will help
......@@ -1731,7 +1790,7 @@ ied)
worth it, but could be of use in some situations.
VNC viewer parameters:
* Use a [108]TightVNC enabled viewer!
* Use a [113]TightVNC enabled viewer!
* Make sure the tight encoding is being used (look at vncviewer and
x11vnc outputs)
* Request 8 bits per pixel using -bgr233 (up to 4X speedup over
......@@ -1779,12 +1838,12 @@ ied)
default (use -nomodtweak to get the old behavior). This was done
because it was noticed on newer XFree86 setups even on bland "us"
keyboards like "pc104 us" XFree86 included a "ghost" key with both "<"
and ">" it. This key does not exist on the keyboard (see [109]this FAQ
and ">" it. This key does not exist on the keyboard (see [114]this FAQ
for more info). Without -modtweak there was then an ambiguity in the
reverse map keysym => keycode, making it so the "<" symbol could not
be typed.
Also see the [110]FAQ about the -xkb option for a more powerful method
Also see the [115]FAQ about the -xkb option for a more powerful method
of modifier tweaking for use on X servers with the XKEYBOARD
extension.
......@@ -1845,7 +1904,7 @@ ied)
the keysym comma when it comes in from a client (so when Shift is down
the comma press will yield "<").
See also the [111]FAQ about the -xkb option as a possible workaround
See also the [116]FAQ about the -xkb option as a possible workaround
using the XKEYBOARD extension. Note that of Jul/2004 in the
libvncserver CVS the -modtweak option is now that default.
......@@ -1906,15 +1965,16 @@ ied)
be obsolete) in the mapping as well. Both of these keysyms were
bound to Mod5 and x11vnc was unfortunately choosing Mode_switch.
From the x11vnc -xkb -dk -dk output it was noted that Mode_switch
was attached to keycode 93 while ISO_Level3_Shift was attached to
keycode 113. The keycode skipping option was used to disable the
ghost key: -skip_keycodes 93
* In implementing -xkb we noticed that some keys were still not
getting through, e.g. "~" and "^". This is not really an XKEYBOARD
problem. What was happening was the VNC viewer was sending the
keysyms asciitilde and asciicircum to x11vnc, but on the X server
with the international keyboard those keysyms were not mapped to
any keys. So x11vnc had to skip them.
was attached to keycode 93 (no physical key generates this
keycode) while ISO_Level3_Shift was attached to keycode 113. The
keycode skipping option was used to disable the ghost key:
-skip_keycodes 93
* In implementing -xkb we noticed that some characters were still
not getting through, e.g. "~" and "^". This is not really an
XKEYBOARD problem. What was happening was the VNC viewer was
sending the keysyms asciitilde and asciicircum to x11vnc, but on
the X server with the international keyboard those keysyms were
not mapped to any keys. So x11vnc had to skip them.
The way these characters are typically entered on international
keyboards is by "dead" (aka "mute") keys. E.g. to enter "~" at the
physical display the keysym dead_tilde is pressed and released
......@@ -2048,7 +2108,7 @@ ied)
There may also be scaling viewers out there (e.g. TightVNC on Windows)
that automatically shrink or expand the remote framebuffer to fit the
local display. Especially for hand-held devices. See also [112]this
local display. Especially for hand-held devices. See also [117]this
FAQ
Q-47: Does x11vnc support server-side framebuffer scaling? (E.g. to
......@@ -2061,16 +2121,14 @@ ied)
the alternative m/n fraction notation (e.g. -scale 2/3).
The current implementation is experimental in that it still needs to
be optimized and there are some painting errors (evidently only with
fraction > 1; which is probably the less interesting case). Extra
resources (CPU, memory I/O, and memory) are required to do the
scaling. If the machine is slow where x11vnc is run with scaling
enabled, the interactive response can be unacceptable. OTOH, if run
with scaling on a fast machine the performance degradation is usually
not a big issue or even noticeable.
If you just want a quick, rough "thumbnail" of the display you can
append ":nb" to the fraction to turn on "no blending" mode. E.g.:
be optimized. Extra resources (CPU, memory I/O, and memory) are
required to do the scaling. If the machine is slow where x11vnc is run
with scaling enabled, the interactive response can be unacceptable.
OTOH, if run with scaling on a fast machine the performance
degradation is usually not a big issue or even noticeable.
Also, if you just want a quick, rough "thumbnail" of the display you
can append ":nb" to the fraction to turn on "no blending" mode. E.g.:
"-scale 1/3:nb" Fonts will be difficult to read, but the larger
features will be recognizable. BTW, "no blending" mode is forced on
when scaling 8bpp PseudoColor displays (because blending an indexed
......@@ -2145,7 +2203,7 @@ ied)
Note: if you are running on Solaris 8 or earlier you can easily hit up
against the maximum of 6 shm segments per process (for Xsun in this
case) from running multiple x11vnc processes. You should modify
/etc/system as mentioned in another [113]FAQ to increase the limit. It
/etc/system as mentioned in another [118]FAQ to increase the limit. It
is probably also a good idea to run with the -onetile option in this
case (to limit each x11vnc to 3 shm segments), or even -noshm to use
no shm segments.
......@@ -2180,7 +2238,7 @@ ied)
If no one is sitting at the workstation and you just want to remotely
switch the VC over to the one associated with your X session (so
x11vnc can poll it), one can use the switchto(1) command, e.g.
switchto 7 for VC #7.
"switchto 7" for VC #7.
Q-52: Does the Clipboard/Selection get transferred between the
vncviewer and the X display?
......@@ -2233,101 +2291,106 @@ References
16. http://www.karlrunge.com/x11vnc/index.html#binaries
17. http://www.karlrunge.com/x11vnc/rx11vnc
18. http://www.karlrunge.com/x11vnc/rx11vnc.pl
19. http://www.tightvnc.com/
20. http://www.karlrunge.com/x11vnc/x11vnc_opts.html
21. http://www.karlrunge.com/x11vnc/index.html#passwd
22. http://wwws.sun.com/sunray/index.html
23. mailto:xvml@karlrunge.com
24. http://www.karlrunge.com/x11vnc/index.html#FAQ-1
25. http://www.karlrunge.com/x11vnc/index.html#FAQ-2
26. http://www.karlrunge.com/x11vnc/index.html#FAQ-3
27. http://www.karlrunge.com/x11vnc/index.html#FAQ-4
28. http://www.karlrunge.com/x11vnc/index.html#FAQ-5
29. http://www.karlrunge.com/x11vnc/index.html#FAQ-6
30. http://www.karlrunge.com/x11vnc/index.html#FAQ-7
31. http://www.karlrunge.com/x11vnc/index.html#FAQ-8
32. http://www.karlrunge.com/x11vnc/index.html#FAQ-9
33. http://www.karlrunge.com/x11vnc/index.html#FAQ-10
34. http://www.karlrunge.com/x11vnc/index.html#FAQ-11
35. http://www.karlrunge.com/x11vnc/index.html#FAQ-12
36. http://www.karlrunge.com/x11vnc/index.html#FAQ-13
37. http://www.karlrunge.com/x11vnc/index.html#FAQ-14
38. http://www.karlrunge.com/x11vnc/index.html#FAQ-15
39. http://www.karlrunge.com/x11vnc/index.html#FAQ-16
40. http://www.karlrunge.com/x11vnc/index.html#FAQ-17
41. http://www.karlrunge.com/x11vnc/index.html#FAQ-18
42. http://www.karlrunge.com/x11vnc/index.html#FAQ-19
43. http://www.karlrunge.com/x11vnc/index.html#FAQ-20
44. http://www.karlrunge.com/x11vnc/index.html#FAQ-21
45. http://www.karlrunge.com/x11vnc/index.html#FAQ-22
46. http://www.karlrunge.com/x11vnc/index.html#FAQ-23
47. http://www.karlrunge.com/x11vnc/index.html#FAQ-24
48. http://www.karlrunge.com/x11vnc/index.html#FAQ-25
49. http://www.karlrunge.com/x11vnc/index.html#FAQ-26
50. http://www.karlrunge.com/x11vnc/index.html#FAQ-27
51. http://www.karlrunge.com/x11vnc/index.html#FAQ-28
52. http://www.karlrunge.com/x11vnc/index.html#FAQ-29
53. http://www.karlrunge.com/x11vnc/index.html#FAQ-30
54. http://www.karlrunge.com/x11vnc/index.html#FAQ-31
55. http://www.karlrunge.com/x11vnc/index.html#FAQ-32
56. http://www.karlrunge.com/x11vnc/index.html#FAQ-33
57. http://www.karlrunge.com/x11vnc/index.html#FAQ-34
58. http://www.karlrunge.com/x11vnc/index.html#FAQ-35
59. http://www.karlrunge.com/x11vnc/index.html#FAQ-36
60. http://www.karlrunge.com/x11vnc/index.html#FAQ-37
61. http://www.karlrunge.com/x11vnc/index.html#FAQ-38
62. http://www.karlrunge.com/x11vnc/index.html#FAQ-39
63. http://www.karlrunge.com/x11vnc/index.html#FAQ-40
64. http://www.karlrunge.com/x11vnc/index.html#FAQ-41
65. http://www.karlrunge.com/x11vnc/index.html#FAQ-42
66. http://www.karlrunge.com/x11vnc/index.html#FAQ-43
67. http://www.karlrunge.com/x11vnc/index.html#FAQ-44
68. http://www.karlrunge.com/x11vnc/index.html#FAQ-45
69. http://www.karlrunge.com/x11vnc/index.html#FAQ-46
70. http://www.karlrunge.com/x11vnc/index.html#FAQ-47
71. http://www.karlrunge.com/x11vnc/index.html#FAQ-48
72. http://www.karlrunge.com/x11vnc/index.html#FAQ-49
73. http://www.karlrunge.com/x11vnc/index.html#FAQ-50
74. http://www.karlrunge.com/x11vnc/index.html#FAQ-51
75. http://www.karlrunge.com/x11vnc/index.html#FAQ-52
76. http://www.karlrunge.com/x11vnc/index.html#FAQ-53
77. http://www.karlrunge.com/x11vnc/index.html#FAQ-54
78. http://www.karlrunge.com/x11vnc/index.html#building
79. http://www.karlrunge.com/x11vnc/index.html#buildfaq
80. http://packages.debian.org/x11vnc
81. http://www.linuxpackages.net/search_view.php?by=name&name=x11vnc
82. http://dag.wieers.com/packages/x11vnc/
83. http://www.bell-labs.com/project/wwexptools/packages.html
84. http://www.karlrunge.com/x11vnc/x11vnc_opts.html
85. http://www.karlrunge.com/x11vnc/index.html#passwd
86. http://fredrik.hubbe.net/x2vnc.html
87. http://www.hubbe.net/~hubbe/win2vnc.html
88. http://www.deboer.gmxhome.de/
89. http://sourceforge.net/projects/win2vnc/
90. http://fredrik.hubbe.net/x2vnc.html
91. http://freshmeat.net/projects/x2x/
92. http://ftp.digital.com/pub/Digital/SRC/x2x/
93. http://zapek.com/software/zvnc/
94. http://www.karlrunge.com/x11vnc/index.html#inetd
95. ftp://ftp.x.org/
96. http://www.karlrunge.com/x11vnc/dtVncPopup
97. http://www.karlrunge.com/x11vnc/index.html#passwdfile
98. http://www.karlrunge.com/x11vnc/index.html#tunnelling
99. http://www.karlrunge.com/x11vnc/index.html#tunnelling
100. http://www.karlrunge.com/x11vnc/index.html#tunnelling
101. http://www.karlrunge.com/x11vnc/index.html#tunnelling
102. http://www.karlrunge.com/x11vnc/blockdpy.c
103. http://www.karlrunge.com/x11vnc/x11vnc.c
104. http://www.karlrunge.com/x11vnc/x11vnc_loop
105. http://www.tightvnc.com/
106. http://www.karlrunge.com/x11vnc/shm_clear
107. http://www.karlrunge.com/x11vnc/index.html#noshm
108. http://www.tightvnc.com/
109. http://www.karlrunge.com/x11vnc/index.html#greaterless
110. http://www.karlrunge.com/x11vnc/index.html#xkbmodtweak
111. http://www.karlrunge.com/x11vnc/index.html#xkbmodtweak
112. http://www.karlrunge.com/x11vnc/index.html#scaling
113. http://www.karlrunge.com/x11vnc/index.html#solshm
19. ftp://ftp.uu.net/graphics/jpeg/
20. http://www.gzip.org/zlib/
21. http://www.sunfreeware.com/
22. http://www.tightvnc.com/
23. http://www.karlrunge.com/x11vnc/x11vnc_opts.html
24. http://www.karlrunge.com/x11vnc/index.html#passwd
25. http://wwws.sun.com/sunray/index.html
26. mailto:xvml@karlrunge.com
27. http://www.karlrunge.com/x11vnc/index.html#FAQ-1
28. http://www.karlrunge.com/x11vnc/index.html#FAQ-2
29. http://www.karlrunge.com/x11vnc/index.html#FAQ-3
30. http://www.karlrunge.com/x11vnc/index.html#FAQ-4
31. http://www.karlrunge.com/x11vnc/index.html#FAQ-5
32. http://www.karlrunge.com/x11vnc/index.html#FAQ-6
33. http://www.karlrunge.com/x11vnc/index.html#FAQ-7
34. http://www.karlrunge.com/x11vnc/index.html#FAQ-8
35. http://www.karlrunge.com/x11vnc/index.html#FAQ-9
36. http://www.karlrunge.com/x11vnc/index.html#FAQ-10
37. http://www.karlrunge.com/x11vnc/index.html#FAQ-11
38. http://www.karlrunge.com/x11vnc/index.html#FAQ-12
39. http://www.karlrunge.com/x11vnc/index.html#FAQ-13
40. http://www.karlrunge.com/x11vnc/index.html#FAQ-14
41. http://www.karlrunge.com/x11vnc/index.html#FAQ-15
42. http://www.karlrunge.com/x11vnc/index.html#FAQ-16
43. http://www.karlrunge.com/x11vnc/index.html#FAQ-17
44. http://www.karlrunge.com/x11vnc/index.html#FAQ-18
45. http://www.karlrunge.com/x11vnc/index.html#FAQ-19
46. http://www.karlrunge.com/x11vnc/index.html#FAQ-20
47. http://www.karlrunge.com/x11vnc/index.html#FAQ-21
48. http://www.karlrunge.com/x11vnc/index.html#FAQ-22
49. http://www.karlrunge.com/x11vnc/index.html#FAQ-23
50. http://www.karlrunge.com/x11vnc/index.html#FAQ-24
51. http://www.karlrunge.com/x11vnc/index.html#FAQ-25
52. http://www.karlrunge.com/x11vnc/index.html#FAQ-26
53. http://www.karlrunge.com/x11vnc/index.html#FAQ-27
54. http://www.karlrunge.com/x11vnc/index.html#FAQ-28
55. http://www.karlrunge.com/x11vnc/index.html#FAQ-29
56. http://www.karlrunge.com/x11vnc/index.html#FAQ-30
57. http://www.karlrunge.com/x11vnc/index.html#FAQ-31
58. http://www.karlrunge.com/x11vnc/index.html#FAQ-32
59. http://www.karlrunge.com/x11vnc/index.html#FAQ-33
60. http://www.karlrunge.com/x11vnc/index.html#FAQ-34
61. http://www.karlrunge.com/x11vnc/index.html#FAQ-35
62. http://www.karlrunge.com/x11vnc/index.html#FAQ-36
63. http://www.karlrunge.com/x11vnc/index.html#FAQ-37
64. http://www.karlrunge.com/x11vnc/index.html#FAQ-38
65. http://www.karlrunge.com/x11vnc/index.html#FAQ-39
66. http://www.karlrunge.com/x11vnc/index.html#FAQ-40
67. http://www.karlrunge.com/x11vnc/index.html#FAQ-41
68. http://www.karlrunge.com/x11vnc/index.html#FAQ-42
69. http://www.karlrunge.com/x11vnc/index.html#FAQ-43
70. http://www.karlrunge.com/x11vnc/index.html#FAQ-44
71. http://www.karlrunge.com/x11vnc/index.html#FAQ-45
72. http://www.karlrunge.com/x11vnc/index.html#FAQ-46
73. http://www.karlrunge.com/x11vnc/index.html#FAQ-47
74. http://www.karlrunge.com/x11vnc/index.html#FAQ-48
75. http://www.karlrunge.com/x11vnc/index.html#FAQ-49
76. http://www.karlrunge.com/x11vnc/index.html#FAQ-50
77. http://www.karlrunge.com/x11vnc/index.html#FAQ-51
78. http://www.karlrunge.com/x11vnc/index.html#FAQ-52
79. http://www.karlrunge.com/x11vnc/index.html#FAQ-53
80. http://www.karlrunge.com/x11vnc/index.html#FAQ-54
81. http://www.karlrunge.com/x11vnc/index.html#building
82. http://www.karlrunge.com/x11vnc/index.html#buildfaq
83. http://packages.debian.org/x11vnc
84. http://www.linuxpackages.net/search_view.php?by=name&name=x11vnc
85. http://dag.wieers.com/packages/x11vnc/
86. http://www.bell-labs.com/project/wwexptools/packages.html
87. http://www.karlrunge.com/x11vnc/x11vnc_opts.html
88. http://www.karlrunge.com/x11vnc/index.html#passwd
89. http://fredrik.hubbe.net/x2vnc.html
90. http://www.hubbe.net/~hubbe/win2vnc.html
91. http://www.deboer.gmxhome.de/
92. http://sourceforge.net/projects/win2vnc/
93. http://fredrik.hubbe.net/x2vnc.html
94. http://freshmeat.net/projects/x2x/
95. http://ftp.digital.com/pub/Digital/SRC/x2x/
96. http://zapek.com/software/zvnc/
97. http://www.karlrunge.com/x11vnc/index.html#8bpp
98. http://www.karlrunge.com/x11vnc/overlays
99. http://www.karlrunge.com/x11vnc/index.html#inetd
100. ftp://ftp.x.org/
101. http://www.karlrunge.com/x11vnc/dtVncPopup
102. http://www.karlrunge.com/x11vnc/index.html#passwdfile
103. http://www.karlrunge.com/x11vnc/index.html#tunnelling
104. http://www.karlrunge.com/x11vnc/index.html#tunnelling
105. http://www.karlrunge.com/x11vnc/index.html#tunnelling
106. http://www.karlrunge.com/x11vnc/index.html#tunnelling
107. http://www.karlrunge.com/x11vnc/blockdpy.c
108. http://www.karlrunge.com/x11vnc/x11vnc.c
109. http://www.karlrunge.com/x11vnc/x11vnc_loop
110. http://www.tightvnc.com/
111. http://www.karlrunge.com/x11vnc/shm_clear
112. http://www.karlrunge.com/x11vnc/index.html#noshm
113. http://www.tightvnc.com/
114. http://www.karlrunge.com/x11vnc/index.html#greaterless
115. http://www.karlrunge.com/x11vnc/index.html#xkbmodtweak
116. http://www.karlrunge.com/x11vnc/index.html#xkbmodtweak
117. http://www.karlrunge.com/x11vnc/index.html#scaling
118. http://www.karlrunge.com/x11vnc/index.html#solshm
=======================================================================
......@@ -2340,7 +2403,8 @@ x11vnc: a VNC server for real X displays
Here are all of x11vnc command line options:
% x11vnc -help
x11vnc: allow VNC connections to real X11 displays. 0.6.2 lastmod: 2004-07-31
x11vnc: allow VNC connections to real X11 displays. 0.6.3pre lastmod: 2004-08-1
5
Typical usage is:
......@@ -2386,12 +2450,39 @@ Options:
setting the XAUTHORITY environment varirable to "file"
before startup. See Xsecurity(7), xauth(1) man pages.
-id windowid Show the window corresponding to <windowid> not the
-id windowid Show the window corresponding to "windowid" not the
entire display. Warning: bugs! new toplevels missed!...
-sid windowid As -id, but instead of using the window directly it
shifts a root view to it: shows saveUnders menus, etc,
although they will be clipped if they extend beyond
the window.
-flashcmap In 8bpp indexed color, let the installed colormap flash
as the pointer moves from window to window (slow).
-notruecolor Force 8bpp indexed color even if it looks like TrueColor
.
-notruecolor For 8bpp displays, force indexed color (i.e. a colormap)
even if it looks like 8bpp TrueColor. (rare problem)
-overlay Handle multiple depth visuals on one screen, e.g. 8+24
and 24+8 overlay visuals (the 32 bits per pixel are
packed with 8 for PseudoColor and 24 for TrueColor).
Currently -overlay only works on Solaris (it uses
XReadScreen(3X11)). There are still some problems with
surrounding-region painting for popup menus (but not
for the popup menu itself); a workaround is to disable
SaveUnders (pass -su to Xsun). Amusingly, if -overlay
is used with -mouse, the mouse cursor shape is correct.
Use -overlay as a workaround for situations like these:
Some legacy applications require the default visual
be 8bpp (8+24), or they will use 8bpp PseudoColor even
when the default visual is depth 24 TrueColor (24+8).
In these cases colors in some windows will be messed
up in x11vnc unless -overlay is used.
Under -overlay, performance will be somewhat degraded
due to the extra image transformations required.
For optimal performance do not use -overlay, but rather
configure the X server so that the default visual is
depth 24 TrueColor and have all apps use that visual.
-visual n Experimental option: probably does not do what you
think. It simply *forces* the visual used for the
framebuffer; this may be a bad thing... It is useful for
......@@ -2406,10 +2497,10 @@ Options:
and response may be slower. If "fraction" contains
a decimal point "." it is taken as a floating point
number, alternatively the notation "m/n" may be used
to denote fractions, e.g. -scale 2/3.
to denote fractions exactly, e.g. -scale 2/3.
Scaling Options: can be added after fraction via ":",
to supply multiple ":" options use commas.
Scaling Options: can be added after "fraction" via
":", to supply multiple ":" options use commas.
If you just want a quick, rough scaling without
blending, append ":nb" to "fraction" (e.g. -scale
1/3:nb). For compatibility with vncviewers the scaled
......@@ -2426,9 +2517,9 @@ Options:
-forever Keep listening for more connections rather than exiting
as soon as the first client(s) disconnect. Same as -many
-connect string For use with "vncviewer -listen" reverse connections.
If string has the form "host" or "host:port"
If "string" has the form "host" or "host:port"
the connection is made once at startup. Use commas
for a list of host's and host:port's. If string
for a list of host's and host:port's. If "string"
contains "/" it is instead interpreted as a file to
periodically check for new hosts. The first line is
read and then the file is truncated.
......@@ -2514,8 +2605,8 @@ Options:
responses. All 3 of the popup keywords can be followed
by +N+M to supply a position for the popup window.
The default is to center the popup window.
-gone string As -accept string, except to run a user supplied command
when a client goes away (disconnects). Unlike -accept,
-gone string As -accept, except to run a user supplied command when
a client goes away (disconnects). Unlike -accept,
the command return code is not interpreted by x11vnc.
-noshm Do not use the MIT-SHM extension for the polling.
......@@ -2529,8 +2620,9 @@ Options:
just use 1 shm tile for polling. Same as -old_copytile.
Limits shm segments used to 3.
-blackout string Black out rectangles on the screen. string is a comma
separated list of WxH+X+Y type geometries for each rect.
-blackout string Black out rectangles on the screen. "string" is a
comma separated list of WxH+X+Y type geometries for
each rectangle.
-xinerama If your screen is composed of multiple monitors
glued together via XINERAMA, and that screen is
non-rectangular this option will try to guess the areas
......
x11vnc/x11vnc.1
View file @ d77d118d
......@@ -2,7 +2,7 @@
.TH X11VNC "1" "August 2004" "x11vnc " "User Commands"
.SH NAME
x11vnc - allow VNC connections to real X11 displays
version: 0.6.2, lastmod: 2004-07-31
version: 0.6.3pre, lastmod: 2004-08-15
.SH SYNOPSIS
.B x11vnc
[OPTION]...
......@@ -69,7 +69,9 @@ entire display. Warning: bugs! new toplevels missed!...
\fB-sid\fR \fIwindowid\fR
.IP
As \fB-id,\fR but instead of using the window directly it
shifts a root view to it: shows saveUnders menus, etc.
shifts a root view to it: shows saveUnders menus, etc,
although they will be clipped if they extend beyond
the window.
.PP
\fB-flashcmap\fR
.IP
......@@ -78,7 +80,34 @@ as the pointer moves from window to window (slow).
.PP
\fB-notruecolor\fR
.IP
Force 8bpp indexed color even if it looks like TrueColor.
For 8bpp displays, force indexed color (i.e. a colormap)
even if it looks like 8bpp TrueColor. (rare problem)
.PP
\fB-overlay\fR
.IP
Handle multiple depth visuals on one screen, e.g. 8+24
and 24+8 overlay visuals (the 32 bits per pixel are
packed with 8 for PseudoColor and 24 for TrueColor).
.IP
Currently \fB-overlay\fR only works on Solaris (it uses
XReadScreen(3X11)). There are still some problems with
surrounding-region painting for popup menus (but not
for the popup menu itself); a workaround is to disable
SaveUnders (pass \fB-su\fR to Xsun). Amusingly, if \fB-overlay\fR
is used with \fB-mouse,\fR the mouse cursor shape is correct.
.IP
Use \fB-overlay\fR as a workaround for situations like these:
Some legacy applications require the default visual
be 8bpp (8+24), or they will use 8bpp PseudoColor even
when the default visual is depth 24 TrueColor (24+8).
In these cases colors in some windows will be messed
up in x11vnc unless \fB-overlay\fR is used.
.IP
Under \fB-overlay,\fR performance will be somewhat degraded
due to the extra image transformations required.
For optimal performance do not use \fB-overlay,\fR but rather
configure the X server so that the default visual is
depth 24 TrueColor and have all apps use that visual.
.PP
\fB-visual\fR \fIn\fR
.IP
......@@ -100,7 +129,7 @@ less than 1 shrink the fb. Note: image may not be sharp
and response may be slower. If \fIfraction\fR contains
a decimal point "." it is taken as a floating point
number, alternatively the notation "m/n" may be used
to denote fractions, e.g. \fB-scale\fR 2/3.
to denote fractions exactly, e.g. \fB-scale\fR 2/3.
.IP
Scaling Options: can be added after \fIfraction\fR via
":", to supply multiple ":" options use commas.
......
x11vnc/x11vnc.c
View file @ d77d118d
......@@ -79,6 +79,7 @@
* -flashcmap option to have colormap flashing as the pointer moves
* windows with private colormaps (slow). Displays with mixed depth 8 and
* 24 visuals will incorrectly display windows using the non-default one.
* On Sun hardware we try to work around this with -overlay.
*
* Feature -id <windowid> can be picky: it can crash for things like the
* window not sufficiently mapped into server memory, use of -mouse, etc.
......@@ -141,6 +142,11 @@
#include <arpa/inet.h>
#endif
#if defined (__SVR4) && defined (__sun)
#define SOLARIS
#include <X11/extensions/transovl.h>
#endif
/*
* Temporary kludge: to run with -xinerama define the following
* macro (uncomment) and be sure to link with -lXinerama
......@@ -156,18 +162,19 @@
#endif
/* date +'lastmod: %Y-%m-%d' */
char lastmod[] = "0.6.3pre lastmod: 2004-08-03";
char lastmod[] = "0.6.3pre lastmod: 2004-08-15";
/* X display info */
Display *dpy = 0;
Visual *visual;
Window window, rootwin;
Display *dpy = 0; /* the single display screen we connect to */
int scr;
Window window, rootwin; /* polled window, root window (usu. same) */
Visual *default_visual; /* the default visual (unless -visual) */
int bpp, depth;
int button_mask = 0;
int dpy_x, dpy_y;
int off_x, off_y;
int indexed_colour = 0;
int dpy_x, dpy_y; /* size of display */
int off_x, off_y; /* offsets for -sid */
int button_mask = 0; /* button state and info */
int num_buttons = -1;
/* image structures */
......@@ -209,17 +216,19 @@ int ntiles, ntiles_x, ntiles_y;
/* arrays that indicate changed or checked tiles. */
unsigned char *tile_has_diff, *tile_tried;
/* blacked-out region things */
/* blacked-out region (-blackout, -xinerama) */
typedef struct bout {
int x1, y1, x2, y2;
} blackout_t;
#define BO_MAX 16
typedef struct tbout {
blackout_t bo[16]; /* hardwired max rectangles. */
blackout_t bo[BO_MAX]; /* hardwired max rectangles. */
int cover;
int count;
} tile_blackout_t;
blackout_t blackr[100]; /* hardwired max blackouts */
#define BLACKR_MAX 100
blackout_t blackr[BLACKR_MAX]; /* hardwired max blackouts */
int blackouts = 0;
tile_blackout_t *tile_blackout;
......@@ -245,6 +254,7 @@ int shut_down = 0;
char vnc_connect_str[VNC_CONNECT_MAX+1];
Atom vnc_connect_prop = None;
/* function prototypes (see filename comment above) */
int all_clients_initialized(void);
......@@ -378,9 +388,11 @@ int watch_primary = 1; /* more dicey, poll for changes in PRIMARY */
int sigpipe = 1; /* 0=skip, 1=ignore, 2=exit */
/* for -visual override */
/* visual stuff for -visual override or -overlay */
VisualID visual_id = (VisualID) 0;
int visual_depth = 0;
int overlay = 0;
int overlay_mouse = 0;
/* tile heuristics: */
double fs_frac = 0.75; /* threshold tile fraction to do fullscreen updates. */
......@@ -394,6 +406,7 @@ int debug_keyboard = 0;
int quiet = 0;
/* info about command line opts */
int got_rfbport = 0;
int got_alwaysshared = 0;
int got_nevershared = 0;
......@@ -454,6 +467,102 @@ int nfix(int i, int n) {
return i;
}
/*
* Kludge to interpose image gets and limit to a subset rectangle of
* the rootwin. This is the -sid option trying to work around invisible
* saveUnders menu, etc, windows.
*/
int rootshift = 0;
#define ADJUST_ROOTSHIFT \
if (rootshift && subwin) { \
d = rootwin; \
x += off_x; \
y += off_y; \
}
/* Wrappers for Image related X calls */
Status XShmGetImage_wr(Display *disp, Drawable d, XImage *image, int x, int y,
unsigned long mask) {
ADJUST_ROOTSHIFT
/* The Solaris overlay stuff is all non-shm (using_shm = 0) */
return XShmGetImage(disp, d, image, x, y, mask);
}
XImage *XGetSubImage_wr(Display *disp, Drawable d, int x, int y,
unsigned int width, unsigned int height, unsigned long plane_mask,
int format, XImage *dest_image, int dest_x, int dest_y) {
ADJUST_ROOTSHIFT
#ifdef SOLARIS
if (overlay && dest_x == 0 && dest_y == 0) {
size_t size = dest_image->height * dest_image->bytes_per_line;
XImage *xi = XReadScreen(disp, d, x, y, width, height,
(Bool) overlay_mouse);
/*
* There is extra overhead from memcpy and free...
* this is not like the real XGetSubImage(). We hope
* this significant overhead is still small compared to
* the time to retrieve the fb data.
*/
memcpy(dest_image->data, xi->data, size);
XDestroyImage(xi);
return (dest_image);
}
#endif
return XGetSubImage(disp, d, x, y, width, height, plane_mask,
format, dest_image, dest_x, dest_y);
}
XImage *XGetImage_wr(Display *disp, Drawable d, int x, int y,
unsigned int width, unsigned int height, unsigned long plane_mask,
int format) {
ADJUST_ROOTSHIFT
#ifdef SOLARIS
if (overlay) {
return XReadScreen(disp, d, x, y, width, height,
(Bool) overlay_mouse);
}
#endif
return XGetImage(disp, d, x, y, width, height, plane_mask, format);
}
XImage *XCreateImage_wr(Display *disp, Visual *visual, unsigned int depth,
int format, int offset, char *data, unsigned int width,
unsigned int height, int bitmap_pad, int bytes_per_line) {
/*
* This is a kludge to get a created XImage to exactly match what
* XReadScreen returns: we noticed the rgb masks are different from
* XCreateImage with the high color visual (red mask <-> blue mask).
* Note we read from the root window(!) then free the data.
*/
#ifdef SOLARIS
if (overlay) {
XImage *xi;
xi = XReadScreen(disp, window, 0, 0, width, height, False);
if (xi == NULL) {
return xi;
}
if (xi->data != NULL) {
free(xi->data);
}
xi->data = data;
return xi;
}
#endif
return XCreateImage(disp, visual, depth, format, offset, data,
width, height, bitmap_pad, bytes_per_line);
}
/* -- cleanup.c -- */
/*
......@@ -4329,7 +4438,7 @@ static int tree_descend_cursor(void) {
/*
* This is for mouse patch drawing under -xinerama or -blackout
*/
static void blackout_nearby_tiles(x, y, dt) {
static void blackout_nearby_tiles(int x, int y, int dt) {
int sx, sy, n, b;
int tx = x/tile_x;
int ty = y/tile_y;
......@@ -4676,7 +4785,7 @@ void set_colormap(void) {
cmap = DefaultColormap(dpy, scr);
ncells = CellsOfScreen(ScreenOfDisplay(dpy, scr));
vis = visual;
vis = default_visual;
if (subwin) {
XWindowAttributes attr;
......@@ -4727,7 +4836,7 @@ void set_colormap(void) {
/*
* Kludge to make 8bpp TrueColor & DirectColor be like
* the StaticColor map. The ncells = 8 is "8 per subfield"
* mentioned in xdpyinfo. Looks OK... likely fortuitously.
* mentioned in xdpyinfo. Looks OK... perhaps fortuitously.
*/
if (ncells == 8) {
ncells = NCOLOR;
......@@ -4768,25 +4877,31 @@ void set_colormap(void) {
/*
* Experimental mode to force the visual of the window instead of querying
* it. Currently just used for testing or overriding some rare cases.
* Input string can be a decimal or 0x hex or something like TrueColor
* or TrueColor:24 to force a depth as well.
* it. Used for testing, overriding some rare cases (win2vnc), and for
* -overlay . Input string can be a decimal or 0x hex or something like
* TrueColor or TrueColor:24 to force a depth as well.
*
* visual_id and possibly visual_depth are set.
*/
void set_visual(char *vstring) {
int vis, defdepth = DefaultDepth(dpy, scr);
void set_visual(char *str) {
int vis, vdepth, defdepth = DefaultDepth(dpy, scr);
XVisualInfo vinfo;
char *p;
char *p, *vstring = strdup(str);
if (! quiet) {
fprintf(stderr, "set_visual: %s\n", vstring);
}
/* set visual depth */
if ((p = strchr(vstring, ':')) != NULL) {
visual_depth = atoi(p+1);
*p = '\0';
vdepth = visual_depth;
} else {
visual_depth = defdepth;
vdepth = defdepth;
}
/* set visual id number */
if (strcmp(vstring, "StaticGray") == 0) {
vis = StaticGray;
} else if (strcmp(vstring, "GrayScale") == 0) {
......@@ -4810,8 +4925,10 @@ void set_visual(char *vstring) {
exit(1);
}
visual_id = (VisualID) v_in;
free(vstring);
return;
}
if (XMatchVisualInfo(dpy, scr, visual_depth, vis, &vinfo)) {
;
} else if (XMatchVisualInfo(dpy, scr, defdepth, vis, &vinfo)) {
......@@ -4820,6 +4937,9 @@ void set_visual(char *vstring) {
fprintf(stderr, "could not find visual: %s\n", vstring);
exit(1);
}
free(vstring);
/* set numerical visual id. */
visual_id = vinfo.visualid;
}
......@@ -4837,7 +4957,7 @@ void nofb_hook(rfbClientPtr cl) {
return;
}
rfbLog("framebuffer requested in -nofb mode by client %s\n", cl->host);
fb = XGetImage(dpy, window, 0, 0, dpy_x, dpy_y, AllPlanes, ZPixmap);
fb = XGetImage_wr(dpy, window, 0, 0, dpy_x, dpy_y, AllPlanes, ZPixmap);
main_fb = fb->data;
rfb_fb = main_fb;
screen->frameBuffer = rfb_fb;
......@@ -5147,7 +5267,7 @@ void initialize_blackout (char *list) {
blackr[blackouts].x2 = X;
blackr[blackouts].y2 = Y;
blackouts++;
if (blackouts >= 100) {
if (blackouts >= BLACKR_MAX) {
rfbLog("too many blackouts: %d\n", blackouts);
break;
}
......@@ -5209,8 +5329,8 @@ void blackout_tiles(void) {
/* union of blackouts */
for (b=0; b < blackouts; b++) {
sraRegionPtr tmp_reg = (sraRegionPtr)
sraRgnCreateRect(blackr[b].x1, blackr[b].y1,
blackr[b].x2, blackr[b].y2);
sraRgnCreateRect(blackr[b].x1,
blackr[b].y1, blackr[b].x2, blackr[b].y2);
sraRgnOr(black_reg, tmp_reg);
sraRgnDestroy(tmp_reg);
......@@ -5260,7 +5380,7 @@ void blackout_tiles(void) {
tile_blackout[n].cover = 1;
}
if (++cnt >= 10) {
if (++cnt >= BO_MAX) {
rfbLog("too many blackout rectangles "
"for tile %d=%d,%d.\n", n, tx, ty);
break;
......@@ -5376,7 +5496,7 @@ void initialize_xinerama (void) {
/*
* Fill the framebuffer with zero for the prescribed rectangle
*/
void zero_fb(x1, y1, x2, y2) {
void zero_fb(int x1, int y1, int x2, int y2) {
int pixelsize = bpp >> 3;
int line, fill = 0;
char *dst;
......@@ -5485,7 +5605,7 @@ static void set_fs_factor(int max) {
}
/*
* set up an XShm image
* set up an XShm image, or if not using shm just create the XImage.
*/
static int shm_create(XShmSegmentInfo *shm, XImage **ximg_ptr, int w, int h,
char *name) {
......@@ -5504,8 +5624,8 @@ static int shm_create(XShmSegmentInfo *shm, XImage **ximg_ptr, int w, int h,
if (! using_shm) {
/* we only need the XImage created */
xim = XCreateImage(dpy, visual, depth, ZPixmap, 0, NULL, w, h,
BitmapPad(dpy), 0);
xim = XCreateImage_wr(dpy, default_visual, depth, ZPixmap,
0, NULL, w, h, BitmapPad(dpy), 0);
X_UNLOCK;
......@@ -5541,7 +5661,8 @@ static int shm_create(XShmSegmentInfo *shm, XImage **ximg_ptr, int w, int h,
return 1;
}
xim = XShmCreateImage(dpy, visual, depth, ZPixmap, NULL, shm, w, h);
xim = XShmCreateImage(dpy, default_visual, depth, ZPixmap, NULL,
shm, w, h);
if (xim == NULL) {
rfbErr("XShmCreateImage(%s) failed.\n", name);
......@@ -6393,13 +6514,13 @@ static void copy_tiles(int tx, int ty, int nt) {
/* read in the whole tile run at once: */
if ( using_shm && size_x == tile_x * nt && size_y == tile_y ) {
/* general case: */
XShmGetImage(dpy, window, tile_row[nt], x, y, AllPlanes);
XShmGetImage_wr(dpy, window, tile_row[nt], x, y, AllPlanes);
} else {
/*
* No shm or near bottom/rhs edge case:
* (but only if tile size does not divide screen size)
*/
XGetSubImage(dpy, window, x, y, size_x, size_y, AllPlanes,
XGetSubImage_wr(dpy, window, x, y, size_x, size_y, AllPlanes,
ZPixmap, tile_row[nt], 0, 0);
}
X_UNLOCK;
......@@ -6991,9 +7112,10 @@ void copy_screen(void) {
/* screen may be too big for 1 shm area, so broken into fs_factor */
for (i=0; i < fs_factor; i++) {
if (using_shm) {
XShmGetImage(dpy, window, fullscreen, 0, y, AllPlanes);
XShmGetImage_wr(dpy, window, fullscreen, 0, y,
AllPlanes);
} else {
XGetSubImage(dpy, window, 0, y, fullscreen->width,
XGetSubImage_wr(dpy, window, 0, y, fullscreen->width,
fullscreen->height, AllPlanes, ZPixmap, fullscreen,
0, 0);
}
......@@ -7254,9 +7376,9 @@ static int scan_display(int ystart, int rescan) {
/* grab the horizontal scanline from the display: */
X_LOCK;
if (using_shm) {
XShmGetImage(dpy, window, scanline, 0, y, AllPlanes);
XShmGetImage_wr(dpy, window, scanline, 0, y, AllPlanes);
} else {
XGetSubImage(dpy, window, 0, y, scanline->width,
XGetSubImage_wr(dpy, window, 0, y, scanline->width,
scanline->height, AllPlanes, ZPixmap, scanline,
0, 0);
}
......@@ -7816,9 +7938,37 @@ static void print_help(void) {
"\n"
"-id windowid Show the window corresponding to \"windowid\" not the\n"
" entire display. Warning: bugs! new toplevels missed!...\n"
"-sid windowid As -id, but instead of using the window directly it\n"
" shifts a root view to it: shows saveUnders menus, etc,\n"
" although they will be clipped if they extend beyond\n"
" the window.\n"
"-flashcmap In 8bpp indexed color, let the installed colormap flash\n"
" as the pointer moves from window to window (slow).\n"
"-notruecolor Force 8bpp indexed color even if it looks like TrueColor.\n"
"-notruecolor For 8bpp displays, force indexed color (i.e. a colormap)\n"
" even if it looks like 8bpp TrueColor. (rare problem)\n"
"-overlay Handle multiple depth visuals on one screen, e.g. 8+24\n"
" and 24+8 overlay visuals (the 32 bits per pixel are\n"
" packed with 8 for PseudoColor and 24 for TrueColor).\n"
"\n"
" Currently -overlay only works on Solaris (it uses\n"
" XReadScreen(3X11)). There are still some problems with\n"
" surrounding-region painting for popup menus (but not\n"
" for the popup menu itself); a workaround is to disable\n"
" SaveUnders (pass -su to Xsun). Amusingly, if -overlay\n"
" is used with -mouse, the mouse cursor shape is correct.\n"
"\n"
" Use -overlay as a workaround for situations like these:\n"
" Some legacy applications require the default visual\n"
" be 8bpp (8+24), or they will use 8bpp PseudoColor even\n"
" when the default visual is depth 24 TrueColor (24+8).\n"
" In these cases colors in some windows will be messed\n"
" up in x11vnc unless -overlay is used.\n"
"\n"
" Under -overlay, performance will be somewhat degraded\n"
" due to the extra image transformations required.\n"
" For optimal performance do not use -overlay, but rather\n"
" configure the X server so that the default visual is\n"
" depth 24 TrueColor and have all apps use that visual.\n"
"-visual n Experimental option: probably does not do what you\n"
" think. It simply *forces* the visual used for the\n"
" framebuffer; this may be a bad thing... It is useful for\n"
......@@ -7833,7 +7983,7 @@ static void print_help(void) {
" and response may be slower. If \"fraction\" contains\n"
" a decimal point \".\" it is taken as a floating point\n"
" number, alternatively the notation \"m/n\" may be used\n"
" to denote fractions, e.g. -scale 2/3.\n"
" to denote fractions exactly, e.g. -scale 2/3.\n"
"\n"
" Scaling Options: can be added after \"fraction\" via\n"
" \":\", to supply multiple \":\" options use commas.\n"
......@@ -8189,7 +8339,7 @@ static char *choose_title(char *display) {
strncat(title, display, MAXN - strlen(title));
if (subwin) {
char *name;
if (XFetchName(dpy, window, &name)) {
if (XFetchName(dpy, subwin, &name)) {
strncat(title, " ", MAXN - strlen(title));
strncat(title, name, MAXN - strlen(title));
}
......@@ -8436,6 +8586,16 @@ int main(int argc, char* argv[]) {
exit(1);
}
}
} else if (!strcmp(arg, "-sid")) {
rootshift = 1;
CHECK_ARGC
if (sscanf(argv[++i], "0x%x", &subwin) != 1) {
if (sscanf(argv[i], "%d", &subwin) != 1) {
fprintf(stderr, "bad -id arg: %s\n",
argv[i]);
exit(1);
}
}
} else if (!strcmp(arg, "-scale")) {
int m, n;
char *p;
......@@ -8500,6 +8660,8 @@ int main(int argc, char* argv[]) {
} else if (!strcmp(arg, "-visual")) {
CHECK_ARGC
visual_str = argv[++i];
} else if (!strcmp(arg, "-overlay")) {
overlay = 1;
} else if (!strcmp(arg, "-flashcmap")) {
flash_cmap = 1;
} else if (!strcmp(arg, "-notruecolor")) {
......@@ -8866,6 +9028,28 @@ int main(int argc, char* argv[]) {
argv_vnc[argc_vnc++] = "604800000"; /* one week... */
}
if (overlay) {
#ifdef SOLARIS
using_shm = 0;
if (flash_cmap && ! quiet) {
fprintf(stderr, "warning: -flashcmap may be "
"incompatible with -overlay\n");
}
if (show_mouse) {
show_mouse = 0;
overlay_mouse = 1;
}
#else
if (! quiet) {
fprintf(stderr, "disabling -overlay: currently only "
"available on Solaris Xsun.\n");
}
overlay = 0;
#endif
}
/* check for OS with small shm limits */
if (using_shm && ! single_copytile) {
if (limit_shm()) {
......@@ -8903,6 +9087,8 @@ int main(int argc, char* argv[]) {
fprintf(stderr, "scaling: %d %.5f\n", scaling, scale_fac);
fprintf(stderr, "visual: %s\n", visual_str ? visual_str
: "null");
fprintf(stderr, "overlay: %d\n", overlay);
fprintf(stderr, "ovl_mouse: %d\n", overlay_mouse);
fprintf(stderr, "viewonly: %d\n", view_only);
fprintf(stderr, "shared: %d\n", shared);
fprintf(stderr, "conn_once: %d\n", connect_once);
......@@ -9025,14 +9211,15 @@ int main(int argc, char* argv[]) {
} else {
if (! quiet) fprintf(stderr, "Using default X display.\n");
}
scr = DefaultScreen(dpy);
rootwin = RootWindow(dpy, scr);
if (! dt) {
static char str[] = "-desktop";
argv_vnc[argc_vnc++] = str;
argv_vnc[argc_vnc++] = choose_title(use_dpy);
}
scr = DefaultScreen(dpy);
rootwin = RootWindow(dpy, scr);
/* check for XTEST */
if (! XTestQueryExtension(dpy, &ev, &er, &maj, &min)) {
......@@ -9060,9 +9247,38 @@ int main(int argc, char* argv[]) {
}
}
if (overlay) {
/*
* ideally we'd like to not have to cook up the visual variables
* but rather let it all come out of XReadScreen(), however
* there is no way to get a default visual out of it, so we
* pretend -visual TrueColor:NN was supplied with NN usually 24.
*/
#ifdef SOLARIS
char str[16];
XImage *xi;
Window twin = subwin ? subwin : rootwin;
xi = XReadScreen(dpy, twin, 0, 0, 8, 8, False);
sprintf(str, "TrueColor:%d", xi->depth);
if (xi->depth != 24 && ! quiet) {
fprintf(stderr, "warning XReadScreen() image has "
"depth %d instead of 24.\n", xi->depth);
}
XDestroyImage(xi);
if (visual_str != NULL && ! quiet) {
fprintf(stderr, "warning: replacing '-visual %s' by "
"'%s' for use with -overlay\n", visual_str, str);
}
visual_str = strdup(str);
#endif
}
if (visual_str != NULL) {
set_visual(visual_str);
}
#ifdef LIBVNCSERVER_HAVE_XKEYBOARD
/* check for XKEYBOARD */
if (use_xkb) {
......@@ -9083,7 +9299,8 @@ int main(int argc, char* argv[]) {
dpy_y = DisplayHeight(dpy, scr);
off_x = 0;
off_y = 0;
visual = DefaultVisual(dpy, scr);
/* this may be overridden via visual_id below */
default_visual = DefaultVisual(dpy, scr);
} else {
/* experiment to share just one window */
XWindowAttributes attr;
......@@ -9095,7 +9312,9 @@ int main(int argc, char* argv[]) {
}
dpy_x = attr.width;
dpy_y = attr.height;
visual = attr.visual;
/* this may be overridden via visual_id below */
default_visual = attr.visual;
/* show_mouse has some segv crashes as well */
if (show_root_cursor) {
......@@ -9108,16 +9327,17 @@ int main(int argc, char* argv[]) {
set_offset();
}
/* initialize depth to reasonable value */
/* initialize depth to reasonable value, visual_id may override */
depth = DefaultDepth(dpy, scr);
/*
* User asked for non-default visual, this is not working well but it
* does some useful things... What should it do in general?
*/
if (visual_id) {
XVisualInfo vinfo_tmpl, *vinfo;
int n;
XVisualInfo vinfo_tmpl, *vinfo;
/*
* we are in here from -visual or -overlay options
* visual_id and visual_depth were set in set_visual().
*/
vinfo_tmpl.visualid = visual_id;
vinfo = XGetVisualInfo(dpy, VisualIDMask, &vinfo_tmpl, &n);
......@@ -9126,10 +9346,11 @@ int main(int argc, char* argv[]) {
(int) visual_id);
exit(1);
}
visual = vinfo->visual;
default_visual = vinfo->visual;
depth = vinfo->depth;
if (visual_depth) {
depth = visual_depth; /* force it */
/* force it from -visual FooColor:NN */
depth = visual_depth;
}
if (! quiet) {
fprintf(stderr, "vis id: 0x%x\n",
......@@ -9148,19 +9369,23 @@ int main(int argc, char* argv[]) {
}
if (nofb || visual_id) {
fb = XCreateImage(dpy, visual, depth, ZPixmap, 0, NULL,
dpy_x, dpy_y, BitmapPad(dpy), 0);
if (nofb) {
/*
* For -nofb we do not allocate the framebuffer, so we
* can save a few MB of memory.
*/
if (! nofb) {
fb->data = (char *) malloc(fb->bytes_per_line *
fb->height);
}
fb = XCreateImage_wr(dpy, default_visual, depth, ZPixmap,
0, NULL, dpy_x, dpy_y, BitmapPad(dpy), 0);
} else if (visual_id) {
/*
* we need to call XCreateImage to supply the visual
*/
fb = XCreateImage_wr(dpy, default_visual, depth, ZPixmap,
0, NULL, dpy_x, dpy_y, BitmapPad(dpy), 0);
fb->data = (char *) malloc(fb->bytes_per_line * fb->height);
} else {
fb = XGetImage(dpy, window, 0, 0, dpy_x, dpy_y, AllPlanes,
fb = XGetImage_wr(dpy, window, 0, 0, dpy_x, dpy_y, AllPlanes,
ZPixmap);
if (! quiet) {
fprintf(stderr, "Read initial data from X display into"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment