another try to make CVS more helpful with configure

INSTALL

+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.

classes/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+EXTRA_DIST = VncViewer.jar  index.vnc  javaviewer.pseudo_proxy.patch
+subdir = classes
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  classes/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

contrib/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+CFLAGS = -I ..
+LDADD = ../libvncserver.a
+
+noinst_PROGRAMS = zippy
+
+@HAVE_X_TRUE@bin_PROGRAMS = x11vnc
+@HAVE_X_TRUE@x11vnc_SOURCES = x11vnc.c
+@HAVE_X_TRUE@INCLUDES = @X_CFLAGS@
+@HAVE_X_TRUE@x11vnc_LDADD = @X_LIBS@ $(LDADD)
+
+zippy_SOURCES = zippy.c
+subdir = contrib
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES =
+@HAVE_X_TRUE@bin_PROGRAMS = x11vnc$(EXEEXT)
+@HAVE_X_FALSE@bin_PROGRAMS =
+noinst_PROGRAMS = zippy$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+
+@HAVE_X_TRUE@am_x11vnc_OBJECTS = x11vnc.$(OBJEXT)
+@HAVE_X_FALSE@am_x11vnc_OBJECTS =
+x11vnc_OBJECTS = $(am_x11vnc_OBJECTS)
+@HAVE_X_TRUE@x11vnc_DEPENDENCIES = ../libvncserver.a
+@HAVE_X_FALSE@x11vnc_DEPENDENCIES =
+x11vnc_LDFLAGS =
+am_zippy_OBJECTS = zippy.$(OBJEXT)
+zippy_OBJECTS = $(am_zippy_OBJECTS)
+zippy_LDADD = $(LDADD)
+zippy_DEPENDENCIES = ../libvncserver.a
+zippy_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/rfb
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/x11vnc.Po $(DEPDIR)/zippy.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(x11vnc_SOURCES) $(zippy_SOURCES)
+DIST_COMMON = ChangeLog Makefile.am Makefile.in
+SOURCES = $(x11vnc_SOURCES) $(zippy_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  contrib/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
+	   $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+clean-noinstPROGRAMS:
+	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+x11vnc$(EXEEXT): $(x11vnc_OBJECTS) $(x11vnc_DEPENDENCIES) 
+	@rm -f x11vnc$(EXEEXT)
+	$(LINK) $(x11vnc_LDFLAGS) $(x11vnc_OBJECTS) $(x11vnc_LDADD) $(LIBS)
+zippy$(EXEEXT): $(zippy_OBJECTS) $(zippy_DEPENDENCIES) 
+	@rm -f zippy$(EXEEXT)
+	$(LINK) $(zippy_LDFLAGS) $(zippy_OBJECTS) $(zippy_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/x11vnc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/zippy.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
+	mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-noinstPROGRAMS distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

install-sh

+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

missing

+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.3 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar ${1+"$@"} && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar ${1+"$@"} && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

mkinstalldirs

+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id: mkinstalldirs,v 1.1 2003/07/10 10:29:01 dscho Exp $
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp"
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+  	  errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here

rfb/rfbconfig.h

+/* rfb/rfbconfig.h.  Generated automatically by configure.  */
+/* rfb/rfbconfig.h.in.  Generated automatically from configure.ac by autoheader.  */
+
+/* Enable 24 bit per pixel in native framebuffer */
+#define ALLOW24BPP 1
+
+/* Enable BackChannel communication */
+#define BACKCHANNEL 1
+
+/* Define if you have the <arpa/inet.h> header file. */
+#define HAVE_ARPA_INET_H 1
+
+/* Define if you don't have `vprintf' but do have `_doprnt.' */
+/* #undef HAVE_DOPRNT */
+
+/* Define if you have the <fcntl.h> header file. */
+#define HAVE_FCNTL_H 1
+
+/* Define if you have the `ftime' function. */
+#define HAVE_FTIME 1
+
+/* Define if you have the `gethostbyname' function. */
+#define HAVE_GETHOSTBYNAME 1
+
+/* Define if you have the `gethostname' function. */
+#define HAVE_GETHOSTNAME 1
+
+/* Define if you have the `gettimeofday' function. */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define if you have the `inet_ntoa' function. */
+#define HAVE_INET_NTOA 1
+
+/* Define if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define if you have the `jpeg' library (-ljpeg). */
+#define HAVE_LIBJPEG 1
+
+/* Define if you have the `nsl' library (-lnsl). */
+#define HAVE_LIBNSL 1
+
+/* Define if you have the `pthread' library (-lpthread). */
+#define HAVE_LIBPTHREAD 1
+
+/* Define if you have the `socket' library (-lsocket). */
+/* #undef HAVE_LIBSOCKET */
+
+/* Define if you have the `z' library (-lz). */
+#define HAVE_LIBZ 1
+
+/* Define if your system has a working `malloc' function. */
+#define HAVE_MALLOC 1
+
+/* Define if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define if you have the `memset' function. */
+#define HAVE_MEMSET 1
+
+/* Define if you have the `mkfifo' function. */
+#define HAVE_MKFIFO 1
+
+/* Define if you have the <netdb.h> header file. */
+#define HAVE_NETDB_H 1
+
+/* Define if you have the <netinet/in.h> header file. */
+#define HAVE_NETINET_IN_H 1
+
+/* Define if you have the `select' function. */
+#define HAVE_SELECT 1
+
+/* Define if you have the `socket' function. */
+#define HAVE_SOCKET 1
+
+/* Define if `stat' has the bug that it succeeds when given the zero-length
+   file name argument. */
+/* #undef HAVE_STAT_EMPTY_STRING_BUG */
+
+/* Define if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define if you have the `strcspn' function. */
+#define HAVE_STRCSPN 1
+
+/* Define if you have the `strdup' function. */
+#define HAVE_STRDUP 1
+
+/* Define if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define if you have the `strftime' function. */
+#define HAVE_STRFTIME 1
+
+/* Define if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define if you have the `strstr' function. */
+#define HAVE_STRSTR 1
+
+/* Define if you have the <syslog.h> header file. */
+#define HAVE_SYSLOG_H 1
+
+/* Define if you have the <sys/socket.h> header file. */
+#define HAVE_SYS_SOCKET_H 1
+
+/* Define if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define if you have the <sys/timeb.h> header file. */
+#define HAVE_SYS_TIMEB_H 1
+
+/* Define if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#define HAVE_SYS_WAIT_H 1
+
+/* Define if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define if you have the `vprintf' function. */
+#define HAVE_VPRINTF 1
+
+/* Use zrle compression; needs a c++ compiler */
+#define HAVE_ZRLE 1
+
+/* Define if `lstat' dereferences a symlink specified with a trailing slash.
+   */
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+
+/* Name of package */
+#define PACKAGE "LibVNCServer"
+
+/* The number of bytes in type char */
+/* #undef SIZEOF_CHAR */
+
+/* The number of bytes in type int */
+/* #undef SIZEOF_INT */
+
+/* The number of bytes in type long */
+/* #undef SIZEOF_LONG */
+
+/* The number of bytes in type short */
+/* #undef SIZEOF_SHORT */
+
+/* The number of bytes in type void* */
+/* #undef SIZEOF_VOIDP */
+
+/* Define if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define if you can safely include both <sys/time.h> and <time.h>. */
+#define TIME_WITH_SYS_TIME 1
+
+/* Version number of package */
+#define VERSION "0.6pre"
+
+/* Define if your processor stores words with the most significant byte first
+   (like Motorola and SPARC, unlike Intel and VAX). */
+/* #undef WORDS_BIGENDIAN */
+
+/* Define if the X Window System is missing or not being used. */
+/* #undef X_DISPLAY_MISSING */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define as `__inline' if that's what the C compiler calls it, or to nothing
+   if it is not supported. */
+/* #undef inline */
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+/* #undef size_t */
+
+/* The type for socklen */
+/* #undef socklen_t */

rfb/rfbconfig.h.in

+/* rfb/rfbconfig.h.in.  Generated automatically from configure.ac by autoheader.  */
+
+/* Enable 24 bit per pixel in native framebuffer */
+#undef ALLOW24BPP
+
+/* Enable BackChannel communication */
+#undef BACKCHANNEL
+
+/* Define if you have the <arpa/inet.h> header file. */
+#undef HAVE_ARPA_INET_H
+
+/* Define if you don't have `vprintf' but do have `_doprnt.' */
+#undef HAVE_DOPRNT
+
+/* Define if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the `ftime' function. */
+#undef HAVE_FTIME
+
+/* Define if you have the `gethostbyname' function. */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define if you have the `gethostname' function. */
+#undef HAVE_GETHOSTNAME
+
+/* Define if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the `jpeg' library (-ljpeg). */
+#undef HAVE_LIBJPEG
+
+/* Define if you have the `nsl' library (-lnsl). */
+#undef HAVE_LIBNSL
+
+/* Define if you have the `pthread' library (-lpthread). */
+#undef HAVE_LIBPTHREAD
+
+/* Define if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define if your system has a working `malloc' function. */
+#undef HAVE_MALLOC
+
+/* Define if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define if you have the `mkfifo' function. */
+#undef HAVE_MKFIFO
+
+/* Define if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define if you have the <netinet/in.h> header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define if you have the `select' function. */
+#undef HAVE_SELECT
+
+/* Define if you have the `socket' function. */
+#undef HAVE_SOCKET
+
+/* Define if `stat' has the bug that it succeeds when given the zero-length
+   file name argument. */
+#undef HAVE_STAT_EMPTY_STRING_BUG
+
+/* Define if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define if you have the `strcspn' function. */
+#undef HAVE_STRCSPN
+
+/* Define if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define if you have the `strstr' function. */
+#undef HAVE_STRSTR
+
+/* Define if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define if you have the <sys/timeb.h> header file. */
+#undef HAVE_SYS_TIMEB_H
+
+/* Define if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the `vprintf' function. */
+#undef HAVE_VPRINTF
+
+/* Use zrle compression; needs a c++ compiler */
+#undef HAVE_ZRLE
+
+/* Define if `lstat' dereferences a symlink specified with a trailing slash.
+   */
+#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
+
+/* Name of package */
+#undef PACKAGE
+
+/* The number of bytes in type char */
+#undef SIZEOF_CHAR
+
+/* The number of bytes in type int */
+#undef SIZEOF_INT
+
+/* The number of bytes in type long */
+#undef SIZEOF_LONG
+
+/* The number of bytes in type short */
+#undef SIZEOF_SHORT
+
+/* The number of bytes in type void* */
+#undef SIZEOF_VOIDP
+
+/* Define if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define if your processor stores words with the most significant byte first
+   (like Motorola and SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Define if the X Window System is missing or not being used. */
+#undef X_DISPLAY_MISSING
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define as `__inline' if that's what the C compiler calls it, or to nothing
+   if it is not supported. */
+#undef inline
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
+
+/* The type for socklen */
+#undef socklen_t

rfb/rfbint.h

+#ifndef _RFB_RFBINT_H
+#define _RFB_RFBINT_H 1
+#ifndef _GENERATED_STDINT_H
+#define _GENERATED_STDINT_H "LibVNCServer 0.6pre"
+/* generated using a gnu compiler version gcc (GCC) 3.2 Copyright (C) 2002 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. */
+
+#include <stdint.h>
+
+
+/* system headers have good uint64_t */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+#endif
+
+  /* once */
+#endif
+#endif

rfb/stamp-h.in

+timestamp