another try to make CVS more helpful with configure

INSTALL

+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.

Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+includedir = $(prefix)/include/rfb
+
+SUBDIRS = . examples contrib vncterm classes
+DIST_SUBDIRS = examples contrib vncterm classes
+
+bin_SCRIPTS = libvncserver-config
+
+#include_HEADERS=rfb.h rfbconfig.h rfbint.h rfbproto.h keysym.h rfbregion.h
+include_HEADERS = rfb/rfb.h rfb/rfbconfig.h rfb/rfbint.h rfb/rfbproto.h \
+	rfb/keysym.h rfb/rfbregion.h
+
+
+noinst_HEADERS = d3des.h zrleDecode.h zrleEncode.h rfb/default8x16.h \
+	rdr/Exception.h rdr/FdInStream.h rdr/FdOutStream.h \
+	rdr/FixedMemOutStream.h rdr/InStream.h rdr/MemInStream.h \
+	rdr/MemOutStream.h rdr/NullOutStream.h rdr/OutStream.h \
+	rdr/ZlibInStream.h rdr/ZlibOutStream.h rdr/types.h
+
+
+ZRLE_SRCS = zrle.cxx rdr/FdInStream.cxx rdr/FdOutStream.cxx rdr/InStream.cxx \
+	rdr/NullOutStream.cxx rdr/ZlibInStream.cxx rdr/ZlibOutStream.cxx
+
+
+EXTRA_DIST = tableinit24.c tableinittctemplate.c tabletranstemplate.c \
+	tableinitcmtemplate.c tabletrans24template.c $(ZRLE_SRCS)
+
+
+LIB_SRCS = main.c rfbserver.c rfbregion.c auth.c sockets.c \
+	stats.c corre.c hextile.c rre.c translate.c cutpaste.c \
+	zlib.c tight.c httpd.c cursor.c font.c \
+	draw.c selbox.c d3des.c vncauth.c cargs.c
+
+
+@HAVE_CXX_TRUE@libvncserver_a_SOURCES = $(LIB_SRCS) $(ZRLE_SRCS)
+@HAVE_CXX_FALSE@libvncserver_a_SOURCES = $(LIB_SRCS)
+
+lib_LIBRARIES = libvncserver.a
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES = libvncserver.spec libvncserver-config
+LIBRARIES = $(lib_LIBRARIES)
+
+libvncserver_a_AR = $(AR) cru
+libvncserver_a_LIBADD =
+@HAVE_CXX_TRUE@am_libvncserver_a_OBJECTS = main.$(OBJEXT) \
+@HAVE_CXX_TRUE@	rfbserver.$(OBJEXT) rfbregion.$(OBJEXT) \
+@HAVE_CXX_TRUE@	auth.$(OBJEXT) sockets.$(OBJEXT) stats.$(OBJEXT) \
+@HAVE_CXX_TRUE@	corre.$(OBJEXT) hextile.$(OBJEXT) rre.$(OBJEXT) \
+@HAVE_CXX_TRUE@	translate.$(OBJEXT) cutpaste.$(OBJEXT) \
+@HAVE_CXX_TRUE@	zlib.$(OBJEXT) tight.$(OBJEXT) httpd.$(OBJEXT) \
+@HAVE_CXX_TRUE@	cursor.$(OBJEXT) font.$(OBJEXT) draw.$(OBJEXT) \
+@HAVE_CXX_TRUE@	selbox.$(OBJEXT) d3des.$(OBJEXT) \
+@HAVE_CXX_TRUE@	vncauth.$(OBJEXT) cargs.$(OBJEXT) zrle.$(OBJEXT) \
+@HAVE_CXX_TRUE@	FdInStream.$(OBJEXT) FdOutStream.$(OBJEXT) \
+@HAVE_CXX_TRUE@	InStream.$(OBJEXT) NullOutStream.$(OBJEXT) \
+@HAVE_CXX_TRUE@	ZlibInStream.$(OBJEXT) ZlibOutStream.$(OBJEXT)
+@HAVE_CXX_FALSE@am_libvncserver_a_OBJECTS = main.$(OBJEXT) \
+@HAVE_CXX_FALSE@	rfbserver.$(OBJEXT) rfbregion.$(OBJEXT) \
+@HAVE_CXX_FALSE@	auth.$(OBJEXT) sockets.$(OBJEXT) \
+@HAVE_CXX_FALSE@	stats.$(OBJEXT) corre.$(OBJEXT) \
+@HAVE_CXX_FALSE@	hextile.$(OBJEXT) rre.$(OBJEXT) \
+@HAVE_CXX_FALSE@	translate.$(OBJEXT) cutpaste.$(OBJEXT) \
+@HAVE_CXX_FALSE@	zlib.$(OBJEXT) tight.$(OBJEXT) httpd.$(OBJEXT) \
+@HAVE_CXX_FALSE@	cursor.$(OBJEXT) font.$(OBJEXT) draw.$(OBJEXT) \
+@HAVE_CXX_FALSE@	selbox.$(OBJEXT) d3des.$(OBJEXT) \
+@HAVE_CXX_FALSE@	vncauth.$(OBJEXT) cargs.$(OBJEXT)
+libvncserver_a_OBJECTS = $(am_libvncserver_a_OBJECTS)
+SCRIPTS = $(bin_SCRIPTS)
+
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/rfb
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/FdInStream.Po $(DEPDIR)/FdOutStream.Po \
+@AMDEP_TRUE@	$(DEPDIR)/InStream.Po $(DEPDIR)/NullOutStream.Po \
+@AMDEP_TRUE@	$(DEPDIR)/ZlibInStream.Po \
+@AMDEP_TRUE@	$(DEPDIR)/ZlibOutStream.Po $(DEPDIR)/auth.Po \
+@AMDEP_TRUE@	$(DEPDIR)/cargs.Po $(DEPDIR)/corre.Po \
+@AMDEP_TRUE@	$(DEPDIR)/cursor.Po $(DEPDIR)/cutpaste.Po \
+@AMDEP_TRUE@	$(DEPDIR)/d3des.Po $(DEPDIR)/draw.Po \
+@AMDEP_TRUE@	$(DEPDIR)/font.Po $(DEPDIR)/hextile.Po \
+@AMDEP_TRUE@	$(DEPDIR)/httpd.Po $(DEPDIR)/main.Po \
+@AMDEP_TRUE@	$(DEPDIR)/rfbregion.Po $(DEPDIR)/rfbserver.Po \
+@AMDEP_TRUE@	$(DEPDIR)/rre.Po $(DEPDIR)/selbox.Po \
+@AMDEP_TRUE@	$(DEPDIR)/sockets.Po $(DEPDIR)/stats.Po \
+@AMDEP_TRUE@	$(DEPDIR)/tight.Po $(DEPDIR)/translate.Po \
+@AMDEP_TRUE@	$(DEPDIR)/vncauth.Po $(DEPDIR)/zlib.Po \
+@AMDEP_TRUE@	$(DEPDIR)/zrle.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+	-o $@
+CXXFLAGS = @CXXFLAGS@
+DIST_SOURCES = $(libvncserver_a_SOURCES)
+HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README $(include_HEADERS) $(noinst_HEADERS) \
+	./rfb/rfbconfig.h.in ./rfb/stamp-h.in AUTHORS COPYING ChangeLog \
+	INSTALL Makefile.am Makefile.in NEWS TODO acinclude.m4 \
+	aclocal.m4 configure configure.ac depcomp install-sh \
+	libvncserver-config.in libvncserver.spec.in missing \
+	mkinstalldirs
+SOURCES = $(libvncserver_a_SOURCES)
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .cxx .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$@ $(SHELL) ./config.status
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure:  $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4):  configure.ac acinclude.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+rfb/rfbconfig.h: rfb/stamp-h
+	@if test ! -f $@; then \
+		rm -f rfb/stamp-h; \
+		$(MAKE) rfb/stamp-h; \
+	else :; fi
+rfb/stamp-h: $(srcdir)/./rfb/rfbconfig.h.in $(top_builddir)/config.status
+	@rm -f rfb/stamp-h rfb/stamp-hT
+	@echo timestamp > rfb/stamp-hT 2> /dev/null
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=rfb/rfbconfig.h \
+	     $(SHELL) ./config.status
+	@mv rfb/stamp-hT rfb/stamp-h
+$(srcdir)/./rfb/rfbconfig.h.in:  $(srcdir)/./rfb/stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/./rfb/stamp-h.in; \
+		$(MAKE) $(srcdir)/./rfb/stamp-h.in; \
+	else :; fi
+$(srcdir)/./rfb/stamp-h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	@rm -f $(srcdir)/./rfb/stamp-h.in $(srcdir)/./rfb/stamp-h.inT
+	@echo timestamp > $(srcdir)/./rfb/stamp-h.inT 2> /dev/null
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@mv $(srcdir)/./rfb/stamp-h.inT $(srcdir)/./rfb/stamp-h.in
+
+distclean-hdr:
+	-rm -f rfb/rfbconfig.h
+libvncserver.spec: $(top_builddir)/config.status libvncserver.spec.in
+	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
+libvncserver-config: $(top_builddir)/config.status libvncserver-config.in
+	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
+
+AR = ar
+install-libLIBRARIES: $(lib_LIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(libdir)/$$p"; \
+	    $(INSTALL_DATA) $$p $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+	@$(POST_INSTALL)
+	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(RANLIB) $(DESTDIR)$(libdir)/$$p"; \
+	    $(RANLIB) $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	  echo " rm -f $(DESTDIR)$(libdir)/$$p"; \
+	  rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+clean-libLIBRARIES:
+	-test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES)
+FdInStream.$(OBJEXT): rdr/FdInStream.cxx
+FdOutStream.$(OBJEXT): rdr/FdOutStream.cxx
+InStream.$(OBJEXT): rdr/InStream.cxx
+NullOutStream.$(OBJEXT): rdr/NullOutStream.cxx
+ZlibInStream.$(OBJEXT): rdr/ZlibInStream.cxx
+ZlibOutStream.$(OBJEXT): rdr/ZlibOutStream.cxx
+libvncserver.a: $(libvncserver_a_OBJECTS) $(libvncserver_a_DEPENDENCIES) 
+	-rm -f libvncserver.a
+	$(libvncserver_a_AR) libvncserver.a $(libvncserver_a_OBJECTS) $(libvncserver_a_LIBADD)
+	$(RANLIB) libvncserver.a
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	  f="`echo $$p|sed '$(transform)'`"; \
+	  if test -f $$p; then \
+	    echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/$$f"; \
+	    $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/$$f; \
+	  elif test -f $(srcdir)/$$p; then \
+	    echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/$$f"; \
+	    $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	  f="`echo $$p|sed '$(transform)'`"; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/FdInStream.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/FdOutStream.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/InStream.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/NullOutStream.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ZlibInStream.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ZlibOutStream.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/auth.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/cargs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/corre.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/cursor.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/cutpaste.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/d3des.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/draw.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/font.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/hextile.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/httpd.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/rfbregion.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/rfbserver.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/rre.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/selbox.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/sockets.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/stats.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/tight.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/translate.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/vncauth.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/zlib.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/zrle.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+
+.cxx.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXXCOMPILE) -c -o $@ `test -f $< || echo '$(srcdir)/'`$<
+
+.cxx.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXXCOMPILE) -c -o $@ `cygpath -w $<`
+
+FdInStream.o: rdr/FdInStream.cxx
+@AMDEP_TRUE@	source='rdr/FdInStream.cxx' object='FdInStream.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/FdInStream.Po' tmpdepfile='$(DEPDIR)/FdInStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o FdInStream.o `test -f rdr/FdInStream.cxx || echo '$(srcdir)/'`rdr/FdInStream.cxx
+
+FdInStream.obj: rdr/FdInStream.cxx
+@AMDEP_TRUE@	source='rdr/FdInStream.cxx' object='FdInStream.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/FdInStream.Po' tmpdepfile='$(DEPDIR)/FdInStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o FdInStream.obj `cygpath -w rdr/FdInStream.cxx`
+
+FdOutStream.o: rdr/FdOutStream.cxx
+@AMDEP_TRUE@	source='rdr/FdOutStream.cxx' object='FdOutStream.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/FdOutStream.Po' tmpdepfile='$(DEPDIR)/FdOutStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o FdOutStream.o `test -f rdr/FdOutStream.cxx || echo '$(srcdir)/'`rdr/FdOutStream.cxx
+
+FdOutStream.obj: rdr/FdOutStream.cxx
+@AMDEP_TRUE@	source='rdr/FdOutStream.cxx' object='FdOutStream.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/FdOutStream.Po' tmpdepfile='$(DEPDIR)/FdOutStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o FdOutStream.obj `cygpath -w rdr/FdOutStream.cxx`
+
+InStream.o: rdr/InStream.cxx
+@AMDEP_TRUE@	source='rdr/InStream.cxx' object='InStream.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/InStream.Po' tmpdepfile='$(DEPDIR)/InStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o InStream.o `test -f rdr/InStream.cxx || echo '$(srcdir)/'`rdr/InStream.cxx
+
+InStream.obj: rdr/InStream.cxx
+@AMDEP_TRUE@	source='rdr/InStream.cxx' object='InStream.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/InStream.Po' tmpdepfile='$(DEPDIR)/InStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o InStream.obj `cygpath -w rdr/InStream.cxx`
+
+NullOutStream.o: rdr/NullOutStream.cxx
+@AMDEP_TRUE@	source='rdr/NullOutStream.cxx' object='NullOutStream.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/NullOutStream.Po' tmpdepfile='$(DEPDIR)/NullOutStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o NullOutStream.o `test -f rdr/NullOutStream.cxx || echo '$(srcdir)/'`rdr/NullOutStream.cxx
+
+NullOutStream.obj: rdr/NullOutStream.cxx
+@AMDEP_TRUE@	source='rdr/NullOutStream.cxx' object='NullOutStream.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/NullOutStream.Po' tmpdepfile='$(DEPDIR)/NullOutStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o NullOutStream.obj `cygpath -w rdr/NullOutStream.cxx`
+
+ZlibInStream.o: rdr/ZlibInStream.cxx
+@AMDEP_TRUE@	source='rdr/ZlibInStream.cxx' object='ZlibInStream.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/ZlibInStream.Po' tmpdepfile='$(DEPDIR)/ZlibInStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o ZlibInStream.o `test -f rdr/ZlibInStream.cxx || echo '$(srcdir)/'`rdr/ZlibInStream.cxx
+
+ZlibInStream.obj: rdr/ZlibInStream.cxx
+@AMDEP_TRUE@	source='rdr/ZlibInStream.cxx' object='ZlibInStream.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/ZlibInStream.Po' tmpdepfile='$(DEPDIR)/ZlibInStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o ZlibInStream.obj `cygpath -w rdr/ZlibInStream.cxx`
+
+ZlibOutStream.o: rdr/ZlibOutStream.cxx
+@AMDEP_TRUE@	source='rdr/ZlibOutStream.cxx' object='ZlibOutStream.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/ZlibOutStream.Po' tmpdepfile='$(DEPDIR)/ZlibOutStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o ZlibOutStream.o `test -f rdr/ZlibOutStream.cxx || echo '$(srcdir)/'`rdr/ZlibOutStream.cxx
+
+ZlibOutStream.obj: rdr/ZlibOutStream.cxx
+@AMDEP_TRUE@	source='rdr/ZlibOutStream.cxx' object='ZlibOutStream.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/ZlibOutStream.Po' tmpdepfile='$(DEPDIR)/ZlibOutStream.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o ZlibOutStream.obj `cygpath -w rdr/ZlibOutStream.cxx`
+CXXDEPMODE = @CXXDEPMODE@
+uninstall-info-am:
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(INSTALL_HEADER) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
+	  $(INSTALL_HEADER) $$d$$p $(DESTDIR)$(includedir)/$$f; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
+	  rm -f $(DESTDIR)$(includedir)/$$f; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+# Avoid unsightly `./'.
+distdir = $(PACKAGE)-$(VERSION)
+
+GZIP_ENV = --best
+
+distdir: $(DISTFILES)
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+	mkdir $(distdir)
+	$(mkinstalldirs) $(distdir)/. $(distdir)/./rfb $(distdir)/rdr $(distdir)/rfb
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	for subdir in $(DIST_SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+	     || (echo "Error: files left after uninstall" 1>&2; \
+	         exit 1) ) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
+	  && rm -f $(distdir).tar.gz \
+	  && (test `find . -type f -print | wc -l` -eq 0 \
+	     || (echo "Error: files left after distclean" 1>&2; \
+	         exit 1) )
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(LIBRARIES) $(SCRIPTS) $(HEADERS)
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(includedir)
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libLIBRARIES mostlyclean-am
+
+dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+distclean: distclean-recursive
+	-rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-exec-am: install-binSCRIPTS install-libLIBRARIES
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \
+	uninstall-info-am uninstall-libLIBRARIES
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+	clean-generic clean-libLIBRARIES clean-recursive dist dist-all \
+	distcheck distclean distclean-compile distclean-depend \
+	distclean-generic distclean-hdr distclean-recursive \
+	distclean-tags distdir dvi dvi-am dvi-recursive info info-am \
+	info-recursive install install-am install-binSCRIPTS \
+	install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-includeHEADERS install-info install-info-am \
+	install-info-recursive install-libLIBRARIES install-man \
+	install-recursive install-strip installcheck installcheck-am \
+	installdirs installdirs-am installdirs-recursive \
+	maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-recursive tags tags-recursive \
+	uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-includeHEADERS uninstall-info-am \
+	uninstall-info-recursive uninstall-libLIBRARIES \
+	uninstall-recursive
+
+
+@HAVE_RPM_TRUE@$(PACKAGE)-$(VERSION).tar.gz: dist
+
+# Rule to build RPM distribution package
+@HAVE_RPM_TRUE@rpm: $(PACKAGE)-$(VERSION).tar.gz libvncserver.spec
+@HAVE_RPM_TRUE@	cp $(PACKAGE)-$(VERSION).tar.gz @RPMSOURCEDIR@
+@HAVE_RPM_TRUE@	rpm -ba libvncserver.spec
+
+all: make_config_executable
+
+make_config_executable:
+	chmod a+x libvncserver-config
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

aclocal.m4

+# aclocal.m4 generated automatically by aclocal 1.5
+
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+AH_TEMPLATE(socklen_t, [The type for socklen])
+AC_DEFUN([AC_TYPE_SOCKLEN_T],
+[AC_CACHE_CHECK([for socklen_t], ac_cv_type_socklen_t,
+[
+  AC_TRY_COMPILE(
+  [#include <sys/types.h>
+   #include <sys/socket.h>],
+  [socklen_t len = 42; return 0;],
+  ac_cv_type_socklen_t=yes,
+  ac_cv_type_socklen_t=no)
+])
+  if test $ac_cv_type_socklen_t != yes; then
+    AC_DEFINE(socklen_t, int)
+  fi
+])
+
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_compile_check_sizeof.html
+dnl
+AC_DEFUN([AC_COMPILE_CHECK_SIZEOF],
+[changequote(<<, >>)dnl
+dnl The name to #define.
+define(<<AC_TYPE_NAME>>, translit(sizeof_$1, [a-z *], [A-Z_P]))dnl
+dnl The cache variable name.
+define(<<AC_CV_NAME>>, translit(ac_cv_sizeof_$1, [ *], [_p]))dnl
+changequote([, ])dnl
+AC_MSG_CHECKING(size of $1)
+AC_CACHE_VAL(AC_CV_NAME,
+[for ac_size in 4 8 1 2 16 $2 ; do # List sizes in rough order of prevalence.
+  AC_TRY_COMPILE([#include "confdefs.h"
+#include <sys/types.h>
+$2
+], [switch (0) case 0: case (sizeof ($1) == $ac_size):;], AC_CV_NAME=$ac_size)
+  if test x$AC_CV_NAME != x ; then break; fi
+done
+])
+if test x$AC_CV_NAME = x ; then
+  AC_MSG_ERROR([cannot determine a size for $1])
+fi
+AC_MSG_RESULT($AC_CV_NAME)
+AC_DEFINE_UNQUOTED(AC_TYPE_NAME, $AC_CV_NAME, [The number of bytes in type $1])
+undefine([AC_TYPE_NAME])dnl
+undefine([AC_CV_NAME])dnl
+])
+
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_create_stdint_h.html
+dnl
+AC_DEFUN([AC_CREATE_STDINT_H],
+[# ------ AC CREATE STDINT H -------------------------------------
+AC_MSG_CHECKING([for stdint-types....])
+ac_stdint_h=`echo ifelse($1, , _stdint.h, $1)`
+if test "$ac_stdint_h" = "stdint.h" ; then
+ AC_MSG_RESULT("(are you sure you want them in ./stdint.h?)")
+elif test "$ac_stdint_h" = "inttypes.h" ; then
+ AC_MSG_RESULT("(are you sure you want them in ./inttypes.h?)")
+else
+ AC_MSG_RESULT("(putting them into $ac_stdint_h)")
+fi
+
+inttype_headers=`echo inttypes.h sys/inttypes.h sys/inttypes.h $2 \
+| sed -e 's/,/ /g'`
+
+ ac_cv_header_stdint_x="no-file"
+ ac_cv_header_stdint_o="no-file"
+ ac_cv_header_stdint_u="no-file"
+ for i in stdint.h $inttype_headers ; do
+   unset ac_cv_type_uintptr_t
+   unset ac_cv_type_uint64_t
+   _AC_CHECK_TYPE_NEW(uintptr_t,[ac_cv_header_stdint_x=$i],dnl
+     continue,[#include <$i>])
+   AC_CHECK_TYPE(uint64_t,[and64="(uint64_t too)"],[and64=""],[#include<$i>])
+   AC_MSG_RESULT(... seen our uintptr_t in $i $and64)
+   break;
+ done
+ if test "$ac_cv_header_stdint_x" = "no-file" ; then
+ for i in stdint.h $inttype_headers ; do
+   unset ac_cv_type_uint32_t
+   unset ac_cv_type_uint64_t
+   AC_CHECK_TYPE(uint32_t,[ac_cv_header_stdint_o=$i],dnl
+     continue,[#include <$i>])
+   AC_CHECK_TYPE(uint64_t,[and64="(uint64_t too)"],[and64=""],[#include<$i>])
+   AC_MSG_RESULT(... seen our uint32_t in $i $and64)
+   break;
+ done
+ if test "$ac_cv_header_stdint_o" = "no-file" ; then
+ for i in sys/types.h $inttype_headers ; do
+   unset ac_cv_type_u_int32_t
+   unset ac_cv_type_u_int64_t
+   AC_CHECK_TYPE(u_int32_t,[ac_cv_header_stdint_u=$i],dnl
+     continue,[#include <$i>])
+   AC_CHECK_TYPE(uint64_t,[and64="(u_int64_t too)"],[and64=""],[#include<$i>])
+   AC_MSG_RESULT(... seen our u_int32_t in $i $and64)
+   break;
+ done
+ fi
+ fi
+
+# ----------------- DONE inttypes.h checks MAYBE C basic types --------
+
+if test "$ac_cv_header_stdint_x" = "no-file" ; then
+   AC_COMPILE_CHECK_SIZEOF(char)
+   AC_COMPILE_CHECK_SIZEOF(short)
+   AC_COMPILE_CHECK_SIZEOF(int)
+   AC_COMPILE_CHECK_SIZEOF(long)
+   AC_COMPILE_CHECK_SIZEOF(void*)
+   ac_cv_header_stdint_test="yes"
+else
+   ac_cv_header_stdint_test="no"
+fi
+
+# ----------------- DONE inttypes.h checks START header -------------
+_ac_stdint_h=AS_TR_CPP(_$ac_stdint_h)
+AC_MSG_RESULT(creating $ac_stdint_h : $_ac_stdint_h)
+echo "#ifndef" $_ac_stdint_h >$ac_stdint_h
+echo "#define" $_ac_stdint_h "1" >>$ac_stdint_h
+echo "#ifndef" _GENERATED_STDINT_H >>$ac_stdint_h
+echo "#define" _GENERATED_STDINT_H '"'$PACKAGE $VERSION'"' >>$ac_stdint_h
+if test "$GCC" = "yes" ; then
+  echo "/* generated using a gnu compiler version" `$CC --version` "*/" \
+  >>$ac_stdint_h
+else
+  echo "/* generated using $CC */" >>$ac_stdint_h
+fi
+echo "" >>$ac_stdint_h
+
+if test "$ac_cv_header_stdint_x" != "no-file" ; then
+   ac_cv_header_stdint="$ac_cv_header_stdint_x"
+elif  test "$ac_cv_header_stdint_o" != "no-file" ; then
+   ac_cv_header_stdint="$ac_cv_header_stdint_o"
+elif  test "$ac_cv_header_stdint_u" != "no-file" ; then
+   ac_cv_header_stdint="$ac_cv_header_stdint_u"
+else
+   ac_cv_header_stdint="stddef.h"
+fi
+
+# ----------------- See if int_least and int_fast types are present
+unset ac_cv_type_int_least32_t
+unset ac_cv_type_int_fast32_t
+AC_CHECK_TYPE(int_least32_t,,,[#include <$ac_cv_header_stdint>])
+AC_CHECK_TYPE(int_fast32_t,,,[#include<$ac_cv_header_stdint>])
+
+if test "$ac_cv_header_stdint" != "stddef.h" ; then
+if test "$ac_cv_header_stdint" != "stdint.h" ; then
+AC_MSG_RESULT(..adding include stddef.h)
+   echo "#include <stddef.h>" >>$ac_stdint_h
+fi ; fi
+AC_MSG_RESULT(..adding include $ac_cv_header_stdint)
+   echo "#include <$ac_cv_header_stdint>" >>$ac_stdint_h
+echo "" >>$ac_stdint_h
+
+# ----------------- DONE header START basic int types -------------
+if test "$ac_cv_header_stdint_x" = "no-file" ; then
+   AC_MSG_RESULT(... need to look at C basic types)
+dnl ac_cv_header_stdint_test="yes" # moved up before creating the file
+else
+   AC_MSG_RESULT(... seen good stdint.h inttypes)
+dnl ac_cv_header_stdint_test="no"  # moved up before creating the file
+fi
+
+if test "$ac_cv_header_stdint_u" != "no-file" ; then
+   AC_MSG_RESULT(... seen bsd/sysv typedefs)
+   cat >>$ac_stdint_h <<EOF
+
+/* int8_t int16_t int32_t defined by inet code, redeclare the u_intXX types */
+typedef u_int8_t uint8_t;
+typedef u_int16_t uint16_t;
+typedef u_int32_t uint32_t;
+EOF
+    cat >>$ac_stdint_h <<EOF
+
+/* glibc compatibility */
+#ifndef __int8_t_defined
+#define __int8_t_defined
+#endif
+EOF
+fi
+
+ac_cv_sizeof_x="$ac_cv_sizeof_char:$ac_cv_sizeof_short"
+ac_cv_sizeof_X="$ac_cv_sizeof_x:$ac_cv_sizeof_int"
+ac_cv_sizeof_X="$ac_cv_sizeof_X:$ac_cv_sizeof_voidp:$ac_cv_sizeof_long"
+if test "$ac_cv_header_stdint" = "stddef.h" ; then
+#   we must guess all the basic types. Apart from byte-adressable system,
+# there a few 32-bit-only dsp-systems. nibble-addressable systems are way off.
+    cat >>$ac_stdint_h <<EOF
+/* ------------ BITSPECIFIC INTTYPES SECTION --------------- */
+EOF
+    t="typedefs for a"
+    case "$ac_cv_sizeof_X" in
+     1:2:2:2:4) AC_MSG_RESULT(..adding $t normal 16-bit system)
+                cat >>$ac_stdint_h <<EOF
+/*              a normal 16-bit system                       */
+typedef unsigned char   uint8_t;
+typedef unsigned short  uint16_t;
+typedef unsigned long   uint32_t;
+#ifndef __int8_t_defined
+#define __int8_t_defined
+typedef          char    int8_t;
+typedef          short   int16_t;
+typedef          long    int32_t;
+#endif
+EOF
+;;
+     1:2:2:4:4) AC_MSG_RESULT(..adding $t 32-bit system derived from a 16-bit)
+                cat >>$ac_stdint_h <<EOF
+/*              a 32-bit system derived from a 16-bit        */
+typedef unsigned char   uint8_t;
+typedef unsigned short  uint16_t;
+typedef unsigned int    uint32_t;
+#ifndef __int8_t_defined
+#define __int8_t_defined
+typedef          char    int8_t;
+typedef          short   int16_t;
+typedef          int     int32_t;
+#endif
+EOF
+;;
+     1:2:4:4:4) AC_MSG_RESULT(..adding $t normal 32-bit system)
+                cat >>$ac_stdint_h <<EOF
+/*              a normal 32-bit system                       */
+typedef unsigned char   uint8_t;
+typedef unsigned short  uint16_t;
+typedef unsigned int    uint32_t;
+#ifndef __int8_t_defined
+#define __int8_t_defined
+typedef          char    int8_t;
+typedef          short   int16_t;
+typedef          int     int32_t;
+#endif
+EOF
+;;
+     1:2:4:4:8) AC_MSG_RESULT(..adding $t 32-bit system prepared for 64-bit)
+                cat >>$ac_stdint_h <<EOF
+
+/*              a 32-bit system prepared for 64-bit          */
+typedef unsigned char   uint8_t;
+typedef unsigned short  uint16_t;
+typedef unsigned int    uint32_t;
+#ifndef __int8_t_defined
+#define __int8_t_defined
+typedef          char    int8_t;
+typedef          short   int16_t;
+typedef          int     int32_t;
+#endif
+EOF
+;;
+     1:2:4:8:8) AC_MSG_RESULT(..adding $t normal 64-bit system)
+                cat >>$ac_stdint_h <<EOF
+
+/*              a normal 64-bit system                       */
+typedef unsigned char   uint8_t;
+typedef unsigned short  uint16_t;
+typedef unsigned int    uint32_t;
+#ifndef __int8_t_defined
+#define __int8_t_defined
+typedef          char    int8_t;
+typedef          short   int16_t;
+typedef          int     int32_t;
+#endif
+EOF
+;;
+     1:2:4:8:4) AC_MSG_RESULT(..adding $t 64-bit system derived from a 32-bit)
+                cat >>$ac_stdint_h <<EOF
+
+/*              a 64-bit system derived from a 32-bit system */
+typedef unsigned char   uint8_t;
+typedef unsigned short  uint16_t;
+typedef unsigned int    uint32_t;
+#ifndef __int8_t_defined
+#define __int8_t_defined
+typedef          char    int8_t;
+typedef          short   int16_t;
+typedef          int     int32_t;
+#endif
+EOF
+;;
+  *)
+    AC_MSG_ERROR([ $ac_cv_sizeof_X dnl
+ what is that a system? contact the author, quick! http://ac-archive.sf.net])
+    exit 1
+;;
+   esac
+fi
+
+# ------------- DONE basic int types START int64_t types ------------
+if test "$ac_cv_type_uint64_t" = "yes"
+then AC_MSG_RESULT(... seen good uint64_t)
+     cat >>$ac_stdint_h <<EOF
+
+/* system headers have good uint64_t */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+#endif
+EOF
+
+elif test "$ac_cv_type_u_int64_t" = "yes"
+then AC_MSG_RESULT(..adding typedef u_int64_t uint64_t)
+     cat >>$ac_stdint_h <<EOF
+
+/* system headers have an u_int64_t */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef u_int64_t uint64_t;
+#endif
+EOF
+else AC_MSG_RESULT(..adding generic uint64_t runtime checks)
+     cat >>$ac_stdint_h <<EOF
+
+/* -------------------- 64 BIT GENERIC SECTION -------------------- */
+/* here are some common heuristics using compiler runtime specifics */
+#if defined __STDC_VERSION__ && defined __STDC_VERSION__ > 199901L
+
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef long long int64_t;
+typedef unsigned long long uint64_t;
+#endif
+
+#elif !defined __STRICT_ANSI__
+#if defined _MSC_VER || defined __WATCOMC__ || defined __BORLANDC__
+
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef __int64 int64_t;
+typedef unsigned __int64 uint64_t;
+#endif
+
+#elif defined __GNUC__ || defined __MWERKS__ || defined __ELF__
+dnl /* note: all ELF-systems seem to have loff-support which needs 64-bit */
+
+#if !defined _NO_LONGLONG
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef long long int64_t;
+typedef unsigned long long uint64_t;
+#endif
+#endif
+
+#elif defined __alpha || (defined __mips && defined _ABIN32)
+
+#if !defined _NO_LONGLONG
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef long int64_t;
+typedef unsigned long uint64_t;
+#endif
+#endif
+  /* compiler/cpu type ... or just ISO C99 */
+#endif
+#endif
+EOF
+
+# plus a default 64-bit for systems that are likely to be 64-bit ready
+  case "$ac_cv_sizeof_x:$ac_cv_sizeof_voidp:$ac_cv_sizeof_long" in
+    1:2:8:8) AC_MSG_RESULT(..adding uint64_t default, normal 64-bit system)
+cat >>$ac_stdint_h <<EOF
+/* DEFAULT: */
+/* seen normal 64-bit system, CC has sizeof(long and void*) == 8 bytes */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef long int64_t;
+typedef unsigned long uint64_t;
+#endif
+EOF
+;;
+    1:2:4:8) AC_MSG_RESULT(..adding uint64_t default, typedef to long)
+cat >>$ac_stdint_h <<EOF
+/* DEFAULT: */
+/* seen 32-bit system prepared for 64-bit, CC has sizeof(long) == 8 bytes */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef long int64_t;
+typedef unsigned long uint64_t;
+#endif
+EOF
+;;
+    1:2:8:4) AC_MSG_RESULT(..adding uint64_t default, typedef long long)
+cat >>$ac_stdint_h <<EOF
+/* DEFAULT: */
+/* seen 64-bit derived from a 32-bit, CC has sizeof(long) == 4 bytes */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+typedef long long int64_t;
+typedef unsigned long long uint64_t;
+#endif
+EOF
+;;
+   *)
+cat >>$ac_stdint_h <<EOF
+/* NOTE: */
+/* the configure-checks for the basic types did not make us believe */
+/* that we could add a fallback to a 'long long' typedef to int64_t */
+EOF
+  esac
+fi
+
+# ------------- DONE int64_t types START intptr types ------------
+if test "$ac_cv_header_stdint_x" = "no-file" ; then
+  cat >>$ac_stdint_h <<EOF
+
+/* -------------------------- INPTR SECTION --------------------------- */
+EOF
+  case "$ac_cv_sizeof_x:$ac_cv_sizeof_voidp" in
+  1:2:2)
+    a="int16_t" ; cat >>$ac_stdint_h <<EOF
+/* we tested sizeof(void*) to be of 2 chars, hence we declare it 16-bit */
+
+typedef uint16_t uintptr_t;
+typedef  int16_t  intptr_t;
+EOF
+;;
+  1:2:4)
+    a="int32_t" ; cat >>$ac_stdint_h <<EOF
+/* we tested sizeof(void*) to be of 4 chars, hence we declare it 32-bit */
+
+typedef uint32_t uintptr_t;
+typedef  int32_t  intptr_t;
+EOF
+;;
+  1:2:8)
+    a="int64_t" ; cat >>$ac_stdint_h <<EOF
+/* we tested sizeof(void*) to be of 8 chars, hence we declare it 64-bit */
+
+typedef uint64_t uintptr_t;
+typedef  int64_t  intptr_t;
+EOF
+;;
+  *)
+    a="long" ; cat >>$ac_stdint_h <<EOF
+/* we tested sizeof(void*) but got no guess, hence we declare it as if long */
+
+typedef unsigned long uintptr_t;
+typedef          long  intptr_t;
+EOF
+;;
+  esac
+AC_MSG_RESULT(..adding typedef $a intptr_t)
+fi
+
+# ------------- DONE intptr types START int_least types ------------
+if test "$ac_cv_type_int_least32_t" = "no"; then
+AC_MSG_RESULT(..adding generic int_least-types)
+     cat >>$ac_stdint_h <<EOF
+
+/* --------------GENERIC INT_LEAST ------------------ */
+
+typedef  int8_t    int_least8_t;
+typedef  int16_t   int_least16_t;
+typedef  int32_t   int_least32_t;
+#ifdef _HAVE_INT64_T
+typedef  int64_t   int_least64_t;
+#endif
+
+typedef uint8_t   uint_least8_t;
+typedef uint16_t  uint_least16_t;
+typedef uint32_t  uint_least32_t;
+#ifdef _HAVE_INT64_T
+typedef uint64_t  uint_least64_t;
+#endif
+EOF
+fi
+
+# ------------- DONE intptr types START int_least types ------------
+if test "$ac_cv_type_int_fast32_t" = "no"; then
+AC_MSG_RESULT(..adding generic int_fast-types)
+     cat >>$ac_stdint_h <<EOF
+
+/* --------------GENERIC INT_FAST ------------------ */
+
+typedef  int8_t    int_fast8_t;
+typedef  int32_t   int_fast16_t;
+typedef  int32_t   int_fast32_t;
+#ifdef _HAVE_INT64_T
+typedef  int64_t   int_fast64_t;
+#endif
+
+typedef uint8_t   uint_fast8_t;
+typedef uint32_t  uint_fast16_t;
+typedef uint32_t  uint_fast32_t;
+#ifdef _HAVE_INT64_T
+typedef uint64_t  uint_fast64_t;
+#endif
+EOF
+fi
+
+if test "$ac_cv_header_stdint_x" = "no-file" ; then
+     cat >>$ac_stdint_h <<EOF
+
+#ifdef _HAVE_INT64_T
+typedef int64_t        intmax_t;
+typedef uint64_t      uintmax_t;
+#else
+typedef long int       intmax_t;
+typedef unsigned long uintmax_t;
+#endif
+EOF
+fi
+
+AC_MSG_RESULT(... DONE $ac_stdint_h)
+   cat >>$ac_stdint_h <<EOF
+
+  /* once */
+#endif
+#endif
+EOF
+])
+
+dnl quote from SunOS-5.8 sys/inttypes.h:
+dnl Use at your own risk.  As of February 1996, the committee is squarely
+dnl behind the fixed sized types; the "least" and "fast" types are still being
+dnl discussed.  The probability that the "fast" types may be removed before
+dnl the standard is finalized is high enough that they are not currently
+dnl implemented.
+
+
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 5
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# We require 2.13 because we rely on SHELL being computed by configure.
+AC_PREREQ([2.13])
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
+# The purpose of this macro is to provide the user with a means to
+# check macros which are provided without letting her know how the
+# information is coded.
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+      [],
+      [define([AC_PROVIDE_IFELSE],
+              [ifdef([AC_PROVIDE_$1],
+                     [$2], [$3])])])
+
+
+# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
+# ----------------------------------------------
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
+fi
+
+# Define the identity of the package.
+PACKAGE=$1
+AC_SUBST(PACKAGE)dnl
+VERSION=$2
+AC_SUBST(VERSION)dnl
+ifelse([$3],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
+
+# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
+# the ones we care about.
+ifdef([m4_pattern_allow],
+      [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl
+
+# Autoconf 2.50 always computes EXEEXT.  However we need to be
+# compatible with 2.13, for now.  So we always define EXEEXT, but we
+# don't compute it.
+AC_SUBST(EXEEXT)
+# Similar for OBJEXT -- only we only use OBJEXT if the user actually
+# requests that it be used.  This is a bit dumb.
+: ${OBJEXT=o}
+AC_SUBST(OBJEXT)
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal)
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake)
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_][CC],
+                          defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_][CXX],
+                          defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+
+# serial 2
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  am_backtick='`'
+  AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
+fi
+])
+
+# AM_AUX_DIR_EXPAND
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# serial 4						-*- Autoconf -*-
+
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ---------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX" or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    echo '#include "conftest.h"' > conftest.c
+    echo 'int i;' > conftest.h
+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=conftest.c object=conftest.o \
+       depfile=conftest.Po tmpdepfile=conftest.TPo \
+       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      am_cv_$1_dependencies_compiler_type=$depmode
+      break
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
+AC_SUBST([$1DEPMODE])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+  DEPDIR=.deps
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+AC_SUBST(DEPDIR)
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking Speeds up one-time builds
+  --enable-dependency-tracking  Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+pushdef([subst], defn([AC_SUBST]))
+subst(AMDEPBACKSLASH)
+popdef([subst])
+])
+
+# Generate code to set up dependency tracking.
+# This macro should only be invoked once -- use via AC_REQUIRE.
+# Usage:
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
+AC_OUTPUT_COMMANDS([
+test x"$AMDEP_TRUE" != x"" ||
+for mf in $CONFIG_FILES; do
+  case "$mf" in
+  Makefile) dirpart=.;;
+  */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
+  *) continue;;
+  esac
+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
+  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n -e '/^U = / s///p' < "$mf"`
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n -e '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
+    $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+], [AMDEP_TRUE="$AMDEP_TRUE"
+ac_aux_dir="$ac_aux_dir"])])
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+	@echo done
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include='#'
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote='"'
+      _am_result=BSD
+   fi
+fi
+AC_SUBST(am__include)
+AC_SUBST(am__quote)
+AC_MSG_RESULT($_am_result)
+rm -f confinc confmf
+])
+
+# serial 3
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+#
+# FIXME: Once using 2.50, use this:
+# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE],
+        [errprint(__file__:__line__: [$0: invalid condition: $1
+])dnl
+m4exit(1)])dnl
+ifelse([$1], [FALSE],
+       [errprint(__file__:__line__: [$0: invalid condition: $1
+])dnl
+m4exit(1)])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+# serial 3
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  We must strip everything past the first ":",
+# and everything past the last "/".
+
+AC_PREREQ([2.12])
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[ifdef([AC_FOREACH],dnl
+	 [dnl init our file count if it isn't already
+	 m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
+	 dnl prepare to store our destination file list for use in config.status
+	 AC_FOREACH([_AM_File], [$1],
+		    [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
+		    m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
+		    dnl and add it to the list of files AC keeps track of, along
+		    dnl with our hook
+		    AC_CONFIG_HEADERS(_AM_File,
+dnl COMMANDS, [, INIT-CMDS]
+[# update the timestamp
+echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
+][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
+		    m4_popdef([_AM_Dest])])],dnl
+[AC_CONFIG_HEADER([$1])
+  AC_OUTPUT_COMMANDS(
+   ifelse(patsubst([$1], [[^ ]], []),
+	  [],
+	  [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
+	   patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
+[am_indx=1
+for am_file in $1; do
+  case " \$CONFIG_HEADERS " in
+  *" \$am_file "*)
+    am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
+    if test -n "\$am_dir"; then
+      am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
+      for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
+        am_tmpdir=\$am_tmpdir\$am_subdir/
+        if test ! -d \$am_tmpdir; then
+          mkdir \$am_tmpdir
+        fi
+      done
+    fi
+    echo timestamp > "\$am_dir"stamp-h\$am_indx
+    ;;
+  esac
+  am_indx=\`expr \$am_indx + 1\`
+done])
+])]) # AM_CONFIG_HEADER
+
+# _AM_DIRNAME(PATH)
+# -----------------
+# Like AS_DIRNAME, only do it during macro expansion
+AC_DEFUN([_AM_DIRNAME],
+       [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
+	      m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1,
+		    m4_if(m4_regexp([$1], [^/.*]), -1,
+			  [.],
+			  m4_patsubst([$1], [^\(/\).*], [\1])),
+		    m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
+	      m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
+]) # _AM_DIRNAME
+

classes/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+EXTRA_DIST = VncViewer.jar  index.vnc  javaviewer.pseudo_proxy.patch
+subdir = classes
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  classes/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

contrib/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+CFLAGS = -I ..
+LDADD = ../libvncserver.a
+
+noinst_PROGRAMS = zippy
+
+@HAVE_X_TRUE@bin_PROGRAMS = x11vnc
+@HAVE_X_TRUE@x11vnc_SOURCES = x11vnc.c
+@HAVE_X_TRUE@INCLUDES = @X_CFLAGS@
+@HAVE_X_TRUE@x11vnc_LDADD = @X_LIBS@ $(LDADD)
+
+zippy_SOURCES = zippy.c
+subdir = contrib
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES =
+@HAVE_X_TRUE@bin_PROGRAMS = x11vnc$(EXEEXT)
+@HAVE_X_FALSE@bin_PROGRAMS =
+noinst_PROGRAMS = zippy$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+
+@HAVE_X_TRUE@am_x11vnc_OBJECTS = x11vnc.$(OBJEXT)
+@HAVE_X_FALSE@am_x11vnc_OBJECTS =
+x11vnc_OBJECTS = $(am_x11vnc_OBJECTS)
+@HAVE_X_TRUE@x11vnc_DEPENDENCIES = ../libvncserver.a
+@HAVE_X_FALSE@x11vnc_DEPENDENCIES =
+x11vnc_LDFLAGS =
+am_zippy_OBJECTS = zippy.$(OBJEXT)
+zippy_OBJECTS = $(am_zippy_OBJECTS)
+zippy_LDADD = $(LDADD)
+zippy_DEPENDENCIES = ../libvncserver.a
+zippy_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/rfb
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/x11vnc.Po $(DEPDIR)/zippy.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(x11vnc_SOURCES) $(zippy_SOURCES)
+DIST_COMMON = ChangeLog Makefile.am Makefile.in
+SOURCES = $(x11vnc_SOURCES) $(zippy_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  contrib/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
+	   $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+clean-noinstPROGRAMS:
+	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+x11vnc$(EXEEXT): $(x11vnc_OBJECTS) $(x11vnc_DEPENDENCIES) 
+	@rm -f x11vnc$(EXEEXT)
+	$(LINK) $(x11vnc_LDFLAGS) $(x11vnc_OBJECTS) $(x11vnc_LDADD) $(LIBS)
+zippy$(EXEEXT): $(zippy_OBJECTS) $(zippy_DEPENDENCIES) 
+	@rm -f zippy$(EXEEXT)
+	$(LINK) $(zippy_LDFLAGS) $(zippy_OBJECTS) $(zippy_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/x11vnc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/zippy.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
+	mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-noinstPROGRAMS distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

depcomp

+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  This file always lives in the current directory.
+  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # $object doesn't have directory information.
+  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  outname="$stripped.o"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+
+   tmpdepfile1="$object.d"
+   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
+   if test "$libtool" = yes; then
+      "$@" -Wc,-MD
+   else
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   else
+      tmpdepfile="$tmpdepfile2"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a space and a tab in the [].
+      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  test -z "$dashmflag" && dashmflag=-M
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*) # this is libtool, let us make it quiet
+      for arg
+      do # cycle over the arguments
+        case "$arg" in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  # X makedepend
+  (
+    shift
+    cleared=no
+    for arg in "$@"; do
+      case $cleared in no)
+        set ""; shift
+	cleared=yes
+      esac
+      case "$arg" in
+        -D*|-I*)
+	  set fnord "$@" "$arg"; shift;;
+	-*)
+	  ;;
+	*)
+	  set fnord "$@" "$arg"; shift;;
+      esac
+    done
+    obj_suffix="`echo $object | sed 's/^.*\././'`"
+    touch "$tmpdepfile"
+    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tail +3 "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  ( IFS=" "
+    case " $* " in
+    *" --mode=compile "*)
+      for arg
+      do # cycle over the arguments
+        case $arg in
+	"--mode=compile")
+	  # insert --quiet before "--mode=compile"
+	  set fnord "$@" --quiet
+	  shift # fnord
+	  ;;
+	esac
+	set fnord "$@" "$arg"
+	shift # fnord
+	shift # "$arg"
+      done
+      ;;
+    esac
+    "$@" -E |
+    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  ) &
+  proc=$!
+  "$@"
+  stat=$?
+  wait "$proc"
+  if test "$stat" != 0; then exit $stat; fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0

examples/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+CFLAGS = -I..
+
+@HAVE_LIBPTHREAD_TRUE@BACKGROUND_TEST = blooptest
+
+@OSX_TRUE@MAC = mac
+@OSX_TRUE@mac_LDFLAGS = -framework ApplicationServices -framework Carbon -framework IOKit
+
+noinst_HEADERS = radon.h
+
+noinst_PROGRAMS = example pnmshow regiontest pnmshow24 fontsel \
+	vncev storepasswd colourmaptest $(BACKGROUND_TEST) $(MAC)
+
+
+LDADD = ../libvncserver.a
+subdir = examples
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES =
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@noinst_PROGRAMS = example$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	pnmshow$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	regiontest$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	pnmshow24$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	fontsel$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	vncev$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	storepasswd$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	colourmaptest$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_TRUE@	mac$(EXEEXT)
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@noinst_PROGRAMS = example$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	pnmshow$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	regiontest$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	pnmshow24$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	fontsel$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	vncev$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	storepasswd$(EXEEXT) \
+@HAVE_LIBPTHREAD_FALSE@@OSX_FALSE@	colourmaptest$(EXEEXT)
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@noinst_PROGRAMS = example$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	pnmshow$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	regiontest$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	pnmshow24$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	fontsel$(EXEEXT) vncev$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	storepasswd$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	colourmaptest$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_TRUE@	blooptest$(EXEEXT) mac$(EXEEXT)
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@noinst_PROGRAMS = example$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	pnmshow$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	regiontest$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	pnmshow24$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	fontsel$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	vncev$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	storepasswd$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	colourmaptest$(EXEEXT) \
+@HAVE_LIBPTHREAD_TRUE@@OSX_FALSE@	blooptest$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
+
+blooptest_SOURCES = blooptest.c
+blooptest_OBJECTS = blooptest.$(OBJEXT)
+blooptest_LDADD = $(LDADD)
+blooptest_DEPENDENCIES = ../libvncserver.a
+blooptest_LDFLAGS =
+colourmaptest_SOURCES = colourmaptest.c
+colourmaptest_OBJECTS = colourmaptest.$(OBJEXT)
+colourmaptest_LDADD = $(LDADD)
+colourmaptest_DEPENDENCIES = ../libvncserver.a
+colourmaptest_LDFLAGS =
+example_SOURCES = example.c
+example_OBJECTS = example.$(OBJEXT)
+example_LDADD = $(LDADD)
+example_DEPENDENCIES = ../libvncserver.a
+example_LDFLAGS =
+fontsel_SOURCES = fontsel.c
+fontsel_OBJECTS = fontsel.$(OBJEXT)
+fontsel_LDADD = $(LDADD)
+fontsel_DEPENDENCIES = ../libvncserver.a
+fontsel_LDFLAGS =
+mac_SOURCES = mac.c
+mac_OBJECTS = mac.$(OBJEXT)
+mac_LDADD = $(LDADD)
+mac_DEPENDENCIES = ../libvncserver.a
+pnmshow_SOURCES = pnmshow.c
+pnmshow_OBJECTS = pnmshow.$(OBJEXT)
+pnmshow_LDADD = $(LDADD)
+pnmshow_DEPENDENCIES = ../libvncserver.a
+pnmshow_LDFLAGS =
+pnmshow24_SOURCES = pnmshow24.c
+pnmshow24_OBJECTS = pnmshow24.$(OBJEXT)
+pnmshow24_LDADD = $(LDADD)
+pnmshow24_DEPENDENCIES = ../libvncserver.a
+pnmshow24_LDFLAGS =
+regiontest_SOURCES = regiontest.c
+regiontest_OBJECTS = regiontest.$(OBJEXT)
+regiontest_LDADD = $(LDADD)
+regiontest_DEPENDENCIES = ../libvncserver.a
+regiontest_LDFLAGS =
+storepasswd_SOURCES = storepasswd.c
+storepasswd_OBJECTS = storepasswd.$(OBJEXT)
+storepasswd_LDADD = $(LDADD)
+storepasswd_DEPENDENCIES = ../libvncserver.a
+storepasswd_LDFLAGS =
+vncev_SOURCES = vncev.c
+vncev_OBJECTS = vncev.$(OBJEXT)
+vncev_LDADD = $(LDADD)
+vncev_DEPENDENCIES = ../libvncserver.a
+vncev_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/rfb
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/blooptest.Po \
+@AMDEP_TRUE@	$(DEPDIR)/colourmaptest.Po $(DEPDIR)/example.Po \
+@AMDEP_TRUE@	$(DEPDIR)/fontsel.Po $(DEPDIR)/mac.Po \
+@AMDEP_TRUE@	$(DEPDIR)/pnmshow.Po $(DEPDIR)/pnmshow24.Po \
+@AMDEP_TRUE@	$(DEPDIR)/regiontest.Po $(DEPDIR)/storepasswd.Po \
+@AMDEP_TRUE@	$(DEPDIR)/vncev.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = blooptest.c colourmaptest.c example.c fontsel.c mac.c \
+	pnmshow.c pnmshow24.c regiontest.c storepasswd.c vncev.c
+HEADERS = $(noinst_HEADERS)
+
+DIST_COMMON = $(noinst_HEADERS) Makefile.am Makefile.in
+SOURCES = blooptest.c colourmaptest.c example.c fontsel.c mac.c pnmshow.c pnmshow24.c regiontest.c storepasswd.c vncev.c
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  examples/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+
+clean-noinstPROGRAMS:
+	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+blooptest$(EXEEXT): $(blooptest_OBJECTS) $(blooptest_DEPENDENCIES) 
+	@rm -f blooptest$(EXEEXT)
+	$(LINK) $(blooptest_LDFLAGS) $(blooptest_OBJECTS) $(blooptest_LDADD) $(LIBS)
+colourmaptest$(EXEEXT): $(colourmaptest_OBJECTS) $(colourmaptest_DEPENDENCIES) 
+	@rm -f colourmaptest$(EXEEXT)
+	$(LINK) $(colourmaptest_LDFLAGS) $(colourmaptest_OBJECTS) $(colourmaptest_LDADD) $(LIBS)
+example$(EXEEXT): $(example_OBJECTS) $(example_DEPENDENCIES) 
+	@rm -f example$(EXEEXT)
+	$(LINK) $(example_LDFLAGS) $(example_OBJECTS) $(example_LDADD) $(LIBS)
+fontsel$(EXEEXT): $(fontsel_OBJECTS) $(fontsel_DEPENDENCIES) 
+	@rm -f fontsel$(EXEEXT)
+	$(LINK) $(fontsel_LDFLAGS) $(fontsel_OBJECTS) $(fontsel_LDADD) $(LIBS)
+mac$(EXEEXT): $(mac_OBJECTS) $(mac_DEPENDENCIES) 
+	@rm -f mac$(EXEEXT)
+	$(LINK) $(mac_LDFLAGS) $(mac_OBJECTS) $(mac_LDADD) $(LIBS)
+pnmshow$(EXEEXT): $(pnmshow_OBJECTS) $(pnmshow_DEPENDENCIES) 
+	@rm -f pnmshow$(EXEEXT)
+	$(LINK) $(pnmshow_LDFLAGS) $(pnmshow_OBJECTS) $(pnmshow_LDADD) $(LIBS)
+pnmshow24$(EXEEXT): $(pnmshow24_OBJECTS) $(pnmshow24_DEPENDENCIES) 
+	@rm -f pnmshow24$(EXEEXT)
+	$(LINK) $(pnmshow24_LDFLAGS) $(pnmshow24_OBJECTS) $(pnmshow24_LDADD) $(LIBS)
+regiontest$(EXEEXT): $(regiontest_OBJECTS) $(regiontest_DEPENDENCIES) 
+	@rm -f regiontest$(EXEEXT)
+	$(LINK) $(regiontest_LDFLAGS) $(regiontest_OBJECTS) $(regiontest_LDADD) $(LIBS)
+storepasswd$(EXEEXT): $(storepasswd_OBJECTS) $(storepasswd_DEPENDENCIES) 
+	@rm -f storepasswd$(EXEEXT)
+	$(LINK) $(storepasswd_LDFLAGS) $(storepasswd_OBJECTS) $(storepasswd_LDADD) $(LIBS)
+vncev$(EXEEXT): $(vncev_OBJECTS) $(vncev_DEPENDENCIES) 
+	@rm -f vncev$(EXEEXT)
+	$(LINK) $(vncev_LDFLAGS) $(vncev_OBJECTS) $(vncev_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/blooptest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/colourmaptest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/example.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/fontsel.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mac.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/pnmshow.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/pnmshow24.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/regiontest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/storepasswd.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/vncev.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(HEADERS)
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-generic \
+	clean-noinstPROGRAMS distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic tags uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

install-sh

+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

missing

+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.3 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar ${1+"$@"} && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar ${1+"$@"} && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" ${1+"$@"} && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

mkinstalldirs

+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id: mkinstalldirs,v 1.1 2003/07/10 10:29:01 dscho Exp $
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp"
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+  	  errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here

rfb/rfbconfig.h

+/* rfb/rfbconfig.h.  Generated automatically by configure.  */
+/* rfb/rfbconfig.h.in.  Generated automatically from configure.ac by autoheader.  */
+
+/* Enable 24 bit per pixel in native framebuffer */
+#define ALLOW24BPP 1
+
+/* Enable BackChannel communication */
+#define BACKCHANNEL 1
+
+/* Define if you have the <arpa/inet.h> header file. */
+#define HAVE_ARPA_INET_H 1
+
+/* Define if you don't have `vprintf' but do have `_doprnt.' */
+/* #undef HAVE_DOPRNT */
+
+/* Define if you have the <fcntl.h> header file. */
+#define HAVE_FCNTL_H 1
+
+/* Define if you have the `ftime' function. */
+#define HAVE_FTIME 1
+
+/* Define if you have the `gethostbyname' function. */
+#define HAVE_GETHOSTBYNAME 1
+
+/* Define if you have the `gethostname' function. */
+#define HAVE_GETHOSTNAME 1
+
+/* Define if you have the `gettimeofday' function. */
+#define HAVE_GETTIMEOFDAY 1
+
+/* Define if you have the `inet_ntoa' function. */
+#define HAVE_INET_NTOA 1
+
+/* Define if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define if you have the `jpeg' library (-ljpeg). */
+#define HAVE_LIBJPEG 1
+
+/* Define if you have the `nsl' library (-lnsl). */
+#define HAVE_LIBNSL 1
+
+/* Define if you have the `pthread' library (-lpthread). */
+#define HAVE_LIBPTHREAD 1
+
+/* Define if you have the `socket' library (-lsocket). */
+/* #undef HAVE_LIBSOCKET */
+
+/* Define if you have the `z' library (-lz). */
+#define HAVE_LIBZ 1
+
+/* Define if your system has a working `malloc' function. */
+#define HAVE_MALLOC 1
+
+/* Define if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define if you have the `memset' function. */
+#define HAVE_MEMSET 1
+
+/* Define if you have the `mkfifo' function. */
+#define HAVE_MKFIFO 1
+
+/* Define if you have the <netdb.h> header file. */
+#define HAVE_NETDB_H 1
+
+/* Define if you have the <netinet/in.h> header file. */
+#define HAVE_NETINET_IN_H 1
+
+/* Define if you have the `select' function. */
+#define HAVE_SELECT 1
+
+/* Define if you have the `socket' function. */
+#define HAVE_SOCKET 1
+
+/* Define if `stat' has the bug that it succeeds when given the zero-length
+   file name argument. */
+/* #undef HAVE_STAT_EMPTY_STRING_BUG */
+
+/* Define if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define if you have the `strchr' function. */
+#define HAVE_STRCHR 1
+
+/* Define if you have the `strcspn' function. */
+#define HAVE_STRCSPN 1
+
+/* Define if you have the `strdup' function. */
+#define HAVE_STRDUP 1
+
+/* Define if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define if you have the `strftime' function. */
+#define HAVE_STRFTIME 1
+
+/* Define if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define if you have the `strstr' function. */
+#define HAVE_STRSTR 1
+
+/* Define if you have the <syslog.h> header file. */
+#define HAVE_SYSLOG_H 1
+
+/* Define if you have the <sys/socket.h> header file. */
+#define HAVE_SYS_SOCKET_H 1
+
+/* Define if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define if you have the <sys/timeb.h> header file. */
+#define HAVE_SYS_TIMEB_H 1
+
+/* Define if you have the <sys/time.h> header file. */
+#define HAVE_SYS_TIME_H 1
+
+/* Define if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#define HAVE_SYS_WAIT_H 1
+
+/* Define if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define if you have the `vprintf' function. */
+#define HAVE_VPRINTF 1
+
+/* Use zrle compression; needs a c++ compiler */
+#define HAVE_ZRLE 1
+
+/* Define if `lstat' dereferences a symlink specified with a trailing slash.
+   */
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+
+/* Name of package */
+#define PACKAGE "LibVNCServer"
+
+/* The number of bytes in type char */
+/* #undef SIZEOF_CHAR */
+
+/* The number of bytes in type int */
+/* #undef SIZEOF_INT */
+
+/* The number of bytes in type long */
+/* #undef SIZEOF_LONG */
+
+/* The number of bytes in type short */
+/* #undef SIZEOF_SHORT */
+
+/* The number of bytes in type void* */
+/* #undef SIZEOF_VOIDP */
+
+/* Define if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define if you can safely include both <sys/time.h> and <time.h>. */
+#define TIME_WITH_SYS_TIME 1
+
+/* Version number of package */
+#define VERSION "0.6pre"
+
+/* Define if your processor stores words with the most significant byte first
+   (like Motorola and SPARC, unlike Intel and VAX). */
+/* #undef WORDS_BIGENDIAN */
+
+/* Define if the X Window System is missing or not being used. */
+/* #undef X_DISPLAY_MISSING */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define as `__inline' if that's what the C compiler calls it, or to nothing
+   if it is not supported. */
+/* #undef inline */
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+/* #undef size_t */
+
+/* The type for socklen */
+/* #undef socklen_t */

rfb/rfbconfig.h.in

+/* rfb/rfbconfig.h.in.  Generated automatically from configure.ac by autoheader.  */
+
+/* Enable 24 bit per pixel in native framebuffer */
+#undef ALLOW24BPP
+
+/* Enable BackChannel communication */
+#undef BACKCHANNEL
+
+/* Define if you have the <arpa/inet.h> header file. */
+#undef HAVE_ARPA_INET_H
+
+/* Define if you don't have `vprintf' but do have `_doprnt.' */
+#undef HAVE_DOPRNT
+
+/* Define if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the `ftime' function. */
+#undef HAVE_FTIME
+
+/* Define if you have the `gethostbyname' function. */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define if you have the `gethostname' function. */
+#undef HAVE_GETHOSTNAME
+
+/* Define if you have the `gettimeofday' function. */
+#undef HAVE_GETTIMEOFDAY
+
+/* Define if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the `jpeg' library (-ljpeg). */
+#undef HAVE_LIBJPEG
+
+/* Define if you have the `nsl' library (-lnsl). */
+#undef HAVE_LIBNSL
+
+/* Define if you have the `pthread' library (-lpthread). */
+#undef HAVE_LIBPTHREAD
+
+/* Define if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define if your system has a working `malloc' function. */
+#undef HAVE_MALLOC
+
+/* Define if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define if you have the `mkfifo' function. */
+#undef HAVE_MKFIFO
+
+/* Define if you have the <netdb.h> header file. */
+#undef HAVE_NETDB_H
+
+/* Define if you have the <netinet/in.h> header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define if you have the `select' function. */
+#undef HAVE_SELECT
+
+/* Define if you have the `socket' function. */
+#undef HAVE_SOCKET
+
+/* Define if `stat' has the bug that it succeeds when given the zero-length
+   file name argument. */
+#undef HAVE_STAT_EMPTY_STRING_BUG
+
+/* Define if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define if you have the `strcspn' function. */
+#undef HAVE_STRCSPN
+
+/* Define if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define if you have the `strstr' function. */
+#undef HAVE_STRSTR
+
+/* Define if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define if you have the <sys/timeb.h> header file. */
+#undef HAVE_SYS_TIMEB_H
+
+/* Define if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the `vprintf' function. */
+#undef HAVE_VPRINTF
+
+/* Use zrle compression; needs a c++ compiler */
+#undef HAVE_ZRLE
+
+/* Define if `lstat' dereferences a symlink specified with a trailing slash.
+   */
+#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
+
+/* Name of package */
+#undef PACKAGE
+
+/* The number of bytes in type char */
+#undef SIZEOF_CHAR
+
+/* The number of bytes in type int */
+#undef SIZEOF_INT
+
+/* The number of bytes in type long */
+#undef SIZEOF_LONG
+
+/* The number of bytes in type short */
+#undef SIZEOF_SHORT
+
+/* The number of bytes in type void* */
+#undef SIZEOF_VOIDP
+
+/* Define if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define if your processor stores words with the most significant byte first
+   (like Motorola and SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Define if the X Window System is missing or not being used. */
+#undef X_DISPLAY_MISSING
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define as `__inline' if that's what the C compiler calls it, or to nothing
+   if it is not supported. */
+#undef inline
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
+
+/* The type for socklen */
+#undef socklen_t

rfb/rfbint.h

+#ifndef _RFB_RFBINT_H
+#define _RFB_RFBINT_H 1
+#ifndef _GENERATED_STDINT_H
+#define _GENERATED_STDINT_H "LibVNCServer 0.6pre"
+/* generated using a gnu compiler version gcc (GCC) 3.2 Copyright (C) 2002 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. */
+
+#include <stdint.h>
+
+
+/* system headers have good uint64_t */
+#ifndef _HAVE_UINT64_T
+#define _HAVE_UINT64_T
+#endif
+
+  /* once */
+#endif
+#endif

rfb/stamp-h.in

+timestamp

vncterm/Makefile.in

+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCLD = @CCLD@
+CXX = @CXX@
+DEPDIR = @DEPDIR@
+EXEEXT = @EXEEXT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RPMSOURCEDIR = @RPMSOURCEDIR@
+VERSION = @VERSION@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+CONSOLE_SRCS = VNConsole.c
+
+noinst_HEADERS = VNConsole.h vga.h
+
+CFLAGS = -I..
+
+LDADD = ../libvncserver.a
+INCLUDES = -I. -I../include
+
+@LINUX_TRUE@bin_PROGRAMS = LinuxVNC
+@LINUX_TRUE@LinuxVNC_SOURCES = LinuxVNC.c $(CONSOLE_SRCS)
+
+noinst_PROGRAMS = VNCommand example
+VNCommand_SOURCES = VNCommand.c $(CONSOLE_SRCS)
+example_SOURCES = example.c $(CONSOLE_SRCS)
+subdir = vncterm
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/rfb/rfbconfig.h
+CONFIG_CLEAN_FILES =
+@LINUX_TRUE@bin_PROGRAMS = LinuxVNC$(EXEEXT)
+@LINUX_FALSE@bin_PROGRAMS =
+noinst_PROGRAMS = VNCommand$(EXEEXT) example$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+
+@LINUX_TRUE@am_LinuxVNC_OBJECTS = LinuxVNC.$(OBJEXT) VNConsole.$(OBJEXT)
+@LINUX_FALSE@am_LinuxVNC_OBJECTS =
+LinuxVNC_OBJECTS = $(am_LinuxVNC_OBJECTS)
+LinuxVNC_LDADD = $(LDADD)
+LinuxVNC_DEPENDENCIES = ../libvncserver.a
+LinuxVNC_LDFLAGS =
+am_VNCommand_OBJECTS = VNCommand.$(OBJEXT) VNConsole.$(OBJEXT)
+VNCommand_OBJECTS = $(am_VNCommand_OBJECTS)
+VNCommand_LDADD = $(LDADD)
+VNCommand_DEPENDENCIES = ../libvncserver.a
+VNCommand_LDFLAGS =
+am_example_OBJECTS = example.$(OBJEXT) VNConsole.$(OBJEXT)
+example_OBJECTS = $(am_example_OBJECTS)
+example_LDADD = $(LDADD)
+example_DEPENDENCIES = ../libvncserver.a
+example_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)/rfb
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/LinuxVNC.Po $(DEPDIR)/VNCommand.Po \
+@AMDEP_TRUE@	$(DEPDIR)/VNConsole.Po $(DEPDIR)/example.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(LinuxVNC_SOURCES) $(VNCommand_SOURCES) \
+	$(example_SOURCES)
+HEADERS = $(noinst_HEADERS)
+
+DIST_COMMON = README $(noinst_HEADERS) ChangeLog Makefile.am \
+	Makefile.in TODO
+SOURCES = $(LinuxVNC_SOURCES) $(VNCommand_SOURCES) $(example_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  vncterm/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
+	   $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+clean-noinstPROGRAMS:
+	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+LinuxVNC$(EXEEXT): $(LinuxVNC_OBJECTS) $(LinuxVNC_DEPENDENCIES) 
+	@rm -f LinuxVNC$(EXEEXT)
+	$(LINK) $(LinuxVNC_LDFLAGS) $(LinuxVNC_OBJECTS) $(LinuxVNC_LDADD) $(LIBS)
+VNCommand$(EXEEXT): $(VNCommand_OBJECTS) $(VNCommand_DEPENDENCIES) 
+	@rm -f VNCommand$(EXEEXT)
+	$(LINK) $(VNCommand_LDFLAGS) $(VNCommand_OBJECTS) $(VNCommand_LDADD) $(LIBS)
+example$(EXEEXT): $(example_OBJECTS) $(example_DEPENDENCIES) 
+	@rm -f example$(EXEEXT)
+	$(LINK) $(example_LDFLAGS) $(example_OBJECTS) $(example_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/LinuxVNC.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/VNCommand.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/VNConsole.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/example.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(HEADERS)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
+	mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-noinstPROGRAMS distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: