# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2013-11-02 12:19+CET\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
"Generated-By: pygettext.py 1.5\n"


#: build/scripts-2.7/pronsole.py:31 pronsole.py:31
msgid "Caught an exception, exiting:"
msgstr ""

#: gcodeplater.py:33 gcodeplater.py:34
msgid "GCODE files (*.gcode;*.GCODE;*.g)"
msgstr ""

#: gcodeplater.py:80
msgid "Warning: no rotation support for now, object won't be correctly rotated"
msgstr ""

#: gcodeplater.py:101
msgid "Exported merged G-Codes to %s"
msgstr ""

#: printrun/excluder.py:26
msgid "Part excluder: draw rectangles where print instructions should be ignored"
msgstr ""

#: printrun/excluder.py:27 printrun/excluder.py:29
msgid "Reset selection"
msgstr ""

#: printrun/gcoder.py:73
msgid "raw G-Code line \"%s\" could not be parsed"
msgstr ""

#: printrun/gcview.py:329
msgid "Fit to plate"
msgstr ""

#: printrun/gcview.py:330
msgid "Fit to plate [F]"
msgstr ""

#: printrun/graph.py:28
msgid "Temperature graph"
msgstr ""

#: printrun/gui.py:21 printrun/pronterface.py:40
msgid "WX is not installed. This program requires WX to run."
msgstr ""

#: printrun/gui.py:74
msgid "Watch"
msgstr ""

#: printrun/gui.py:76
msgid "Monitor Temperatures in Graph"
msgstr ""

#: printrun/gui.py:83
msgid "Heat:"
msgstr ""

#: printrun/gui.py:86
msgid "Switch Hotend Off"
msgstr ""

#: printrun/gui.py:86 printrun/gui.py:105 printrun/gui.py:424
msgid "Off"
msgstr ""

#: printrun/gui.py:94
msgid "Select Temperature for Hotend"
msgstr ""

#: printrun/gui.py:98
msgid "Switch Hotend On"
msgstr ""

#: printrun/gui.py:98 printrun/gui.py:117
msgid "Set"
msgstr ""

#: printrun/gui.py:102 printrun/gui.py:199
msgid "Bed:"
msgstr ""

#: printrun/gui.py:105
msgid "Switch Heated Bed Off"
msgstr ""

#: printrun/gui.py:113
msgid "Select Temperature for Heated Bed"
msgstr ""

#: printrun/gui.py:117
msgid "Switch Heated Bed On"
msgstr ""

#: printrun/gui.py:146
msgid "Tool:"
msgstr ""

#: printrun/gui.py:149
msgid "Click to switch current extruder"
msgstr ""

#: printrun/gui.py:166
msgid "Select current extruder"
msgstr ""

#: printrun/gui.py:182
msgid "mm @"
msgstr ""

#: printrun/gui.py:183
msgid "Amount to Extrude or Retract (mm)"
msgstr ""

#: printrun/gui.py:185
msgid "Extrude / Retract speed (mm/min)"
msgstr ""

#: printrun/gui.py:191
msgid ""
"mm/\n"
"min"
msgstr ""

#: printrun/gui.py:197
msgid "Heater:"
msgstr ""

#: printrun/gui.py:273
msgid "Set Maximum Speed for X & Y axes (mm/min)"
msgstr ""

#: printrun/gui.py:274
msgid "XY:"
msgstr ""

#: printrun/gui.py:276
msgid "mm/min Z:"
msgstr ""

#: printrun/gui.py:278
msgid "Set Maximum Speed for Z axis (mm/min)"
msgstr ""

#: printrun/gui.py:334
msgid ""
"Click to examine / edit\n"
"  layers of loaded file"
msgstr ""

#: printrun/gui.py:370
msgid ""
"Send commands to printer\n"
"(Type 'help' for simple\n"
"help function)"
msgstr ""

#: printrun/gui.py:377
msgid "Send"
msgstr ""

#: printrun/gui.py:377
msgid "Send Command to Printer"
msgstr ""

#: printrun/gui.py:385
msgid "Lock"
msgstr ""

#: printrun/gui.py:387
msgid "Lock graphical interface"
msgstr ""

#: printrun/gui.py:394
msgid ""
"Communication Settings\n"
"Click to rescan ports"
msgstr ""

#: printrun/gui.py:394
msgid "Port"
msgstr ""

#: printrun/gui.py:399
msgid "Select Port Printer is connected to"
msgstr ""

#: printrun/gui.py:408
msgid "Select Baud rate for printer communication"
msgstr ""

#: printrun/gui.py:415
msgid "Connect to the printer"
msgstr ""

#: printrun/gui.py:415 printrun/pronterface.py:1888
msgid "Connect"
msgstr ""

#: printrun/gui.py:417
msgid "Reset"
msgstr ""

#: printrun/gui.py:417
msgid "Reset the printer"
msgstr ""

#: printrun/gui.py:418
msgid "Load a 3D model file"
msgstr ""

#: printrun/gui.py:418
msgid "Load file"
msgstr ""

#: printrun/gui.py:419
msgid "SD"
msgstr ""

#: printrun/gui.py:419
msgid "SD Card Printing"
msgstr ""

#: printrun/gui.py:421
msgid "Start Printing Loaded File"
msgstr ""

#: printrun/gui.py:421 printrun/pronterface.py:366
#: printrun/pronterface.py:1643 printrun/pronterface.py:1709
#: printrun/pronterface.py:1834 printrun/pronterface.py:1906
#: printrun/pronterface.py:1919
msgid "Print"
msgstr ""

#: printrun/gui.py:423
msgid "Pause Current Print"
msgstr ""

#: printrun/gui.py:423 printrun/pronterface.py:1710
#: printrun/pronterface.py:1755 printrun/pronterface.py:1809
#: printrun/pronterface.py:1833 printrun/pronterface.py:1905
#: printrun/pronterface.py:1922
msgid "Pause"
msgstr ""

#: printrun/gui.py:424
msgid "Turn printer off"
msgstr ""

#: printrun/gui.py:491
msgid "Commands"
msgstr ""

#: printrun/gui.py:492
msgid "Status"
msgstr ""

#: printrun/gui.py:495 printrun/gui.py:564 printrun/printcore.py:440
#: printrun/printcore.py:448 printrun/pronsole.py:851 printrun/pronsole.py:907
#: printrun/pronterface.py:1511 printrun/pronterface.py:1749
#: printrun/pronterface.py:1864
msgid "Not connected to printer."
msgstr ""

#: printrun/gviz.py:28
msgid "Layer number and Z position show here when you scroll"
msgstr ""

#: printrun/gviz.py:38
msgid "Zoom In [+]"
msgstr ""

#: printrun/gviz.py:39
msgid "Zoom Out [-]"
msgstr ""

#: printrun/gviz.py:41
msgid "Move Up a Layer [U]"
msgstr ""

#: printrun/gviz.py:42
msgid "Move Down a Layer [D]"
msgstr ""

#: printrun/gviz.py:43
msgid "Reset view"
msgstr ""

#: printrun/gviz.py:67
msgid "Gcode view, shift to move view, mousewheel to set layer"
msgstr ""

#: printrun/gviz.py:105 printrun/gviz.py:241
msgid "Layer %d - Going Up - Z = %.03f mm"
msgstr ""

#: printrun/gviz.py:249
msgid "Layer %d - Going Down - Z = %.03f mm"
msgstr ""

#: printrun/objectplater.py:35
msgid "Plate building tool"
msgstr ""

#: printrun/objectplater.py:45
msgid "Clear"
msgstr ""

#: printrun/objectplater.py:49
msgid "Load"
msgstr ""

#: printrun/objectplater.py:53
msgid "Snap to Z = 0"
msgstr ""

#: printrun/objectplater.py:57
msgid "Put at center"
msgstr ""

#: printrun/objectplater.py:61
msgid "Delete"
msgstr ""

#: printrun/objectplater.py:65
msgid "Auto arrange"
msgstr ""

#: printrun/objectplater.py:69
msgid "Export"
msgstr ""

#: printrun/objectplater.py:73
msgid "Done"
msgstr ""

#: printrun/objectplater.py:76 printrun/pronterface.py:801
#: printrun/pronterface.py:1653 printrun/pronterface_widgets.py:43
msgid "Cancel"
msgstr ""

#: printrun/objectplater.py:151
msgid "Autoplating"
msgstr ""

#: printrun/objectplater.py:199
msgid "Bed full, sorry sir :("
msgstr ""

#: printrun/objectplater.py:209
msgid "Are you sure you want to clear the grid? All unsaved changes will be lost."
msgstr ""

#: printrun/objectplater.py:210
msgid "Clear the grid?"
msgstr ""

#: printrun/objectplater.py:256
msgid "Pick file to load"
msgstr ""

#: printrun/objectplater.py:267
msgid "Pick file to save to"
msgstr ""

#: printrun/plater.py:212
msgid "STL files (*.stl;*.STL)|*.stl;*.STL|OpenSCAD files (*.scad)|*.scad"
msgstr ""

#: printrun/plater.py:213
msgid "STL files (*.stl;*.STL)|*.stl;*.STL"
msgstr ""

#: printrun/plater.py:241
msgid "Loading STL file failed"
msgstr ""

#: printrun/plater.py:241 printrun/plater.py:247
msgid "Error"
msgstr ""

#: printrun/plater.py:247
msgid "Loading OpenSCAD file failed"
msgstr ""

#: printrun/plater.py:279
msgid "Couldn't load non-existing file %s"
msgstr ""

#: printrun/plater.py:355
msgid "Wrote plate to %s"
msgstr ""

#: printrun/plater.py:362
msgid "Failed to use simarrange for plating, falling back to the standard method"
msgstr ""

#: printrun/plater.py:367
msgid "Autoplating using simarrange"
msgstr ""

#: printrun/plater.py:382
msgid "Plate full, please remove some objects"
msgstr ""

#: printrun/plater.py:399
msgid "simarrange failed"
msgstr ""

#: printrun/printcore.py:168
msgid "Could not connect to %s:%s:"
msgstr ""

#: printrun/printcore.py:169
msgid "Socket error %s:"
msgstr ""

#: printrun/printcore.py:182
msgid "Could not connect to %s at baudrate %s:"
msgstr ""

#: printrun/printcore.py:183
msgid "Serial error: %s"
msgstr ""

#: printrun/printcore.py:217
msgid "Can't read from printer (disconnected?) (SelectError {0}): {1}"
msgstr ""

#: printrun/printcore.py:220
msgid "SelectError ({0}): {1}"
msgstr ""

#: printrun/printcore.py:223
msgid "Can't read from printer (disconnected?) (SerialException): {0}"
msgstr ""

#: printrun/printcore.py:226
msgid "Can't read from printer (disconnected?) (Socket error {0}): {1}"
msgstr ""

#: printrun/printcore.py:231
msgid "Can't read from printer (disconnected?) (OS Error {0}): {1}"
msgstr ""

#: printrun/printcore.py:245
msgid "Aborting connection attempt after 4 failed writes."
msgstr ""

#: printrun/printcore.py:457
msgid "Print start callback failed with:"
msgstr ""

#: printrun/printcore.py:468
msgid "Print end callback failed with:"
msgstr ""

#: printrun/printcore.py:471
msgid "Print thread died due to the following error:"
msgstr ""

#: printrun/printcore.py:559
msgid "Warning: could not analyze command %s:"
msgstr ""

#: printrun/printcore.py:571
msgid "Can't write to printer (disconnected?) (Socket error {0}): {1}"
msgstr ""

#: printrun/printcore.py:574
msgid "Can't write to printer (disconnected?) (SerialException): {0}"
msgstr ""

#: printrun/printcore.py:577
msgid "Socket connection broken, disconnected. ({0}): {1}"
msgstr ""

#: printrun/pronsole.py:66
msgid "Default: "
msgstr ""

#: printrun/pronsole.py:67
msgid "(Control-doubleclick to reset to default value)"
msgstr ""

#: printrun/pronsole.py:102
msgid "Are you sure you want to reset the setting to the default value: {0!r} ?"
msgstr ""

#: printrun/pronsole.py:102
msgid "Confirm set default"
msgstr ""

#: printrun/pronsole.py:238
msgid "Port used to communicate with printer"
msgstr ""

#: printrun/pronsole.py:238
msgid "Serial port"
msgstr ""

#: printrun/pronsole.py:239
msgid "Baud rate"
msgstr ""

#: printrun/pronsole.py:239
msgid "Communications Speed"
msgstr ""

#: printrun/pronsole.py:240
msgid "Bed temperature for ABS"
msgstr ""

#: printrun/pronsole.py:240
msgid "Heated Build Platform temp for ABS (deg C)"
msgstr ""

#: printrun/pronsole.py:241
msgid "Bed temperature for PLA"
msgstr ""

#: printrun/pronsole.py:241
msgid "Heated Build Platform temp for PLA (deg C)"
msgstr ""

#: printrun/pronsole.py:242
msgid "Extruder temp for ABS (deg C)"
msgstr ""

#: printrun/pronsole.py:242
msgid "Extruder temperature for ABS"
msgstr ""

#: printrun/pronsole.py:243
msgid "Extruder temp for PLA (deg C)"
msgstr ""

#: printrun/pronsole.py:243
msgid "Extruder temperature for PLA"
msgstr ""

#: printrun/pronsole.py:244
msgid "Feedrate for Control Panel Moves in X and Y (mm/min)"
msgstr ""

#: printrun/pronsole.py:244
msgid "X && Y manual feedrate"
msgstr ""

#: printrun/pronsole.py:245
msgid "Feedrate for Control Panel Moves in Z (mm/min)"
msgstr ""

#: printrun/pronsole.py:245
msgid "Z manual feedrate"
msgstr ""

#: printrun/pronsole.py:246
msgid "E manual feedrate"
msgstr ""

#: printrun/pronsole.py:246
msgid "Feedrate for Control Panel Moves in Extrusions (mm/min)"
msgstr ""

#: printrun/pronsole.py:247
msgid "Slice command"
msgstr ""

#: printrun/pronsole.py:248
msgid "Slice settings command"
msgstr ""

#: printrun/pronsole.py:248
msgid "Slicer options command"
msgstr ""

#: printrun/pronsole.py:249
msgid "Executable to run when the print is finished"
msgstr ""

#: printrun/pronsole.py:249
msgid "Final command"
msgstr ""

#: printrun/pronsole.py:848
msgid "Please enter target name in 8.3 format."
msgstr ""

#: printrun/pronsole.py:854
msgid "Uploading as %s"
msgstr ""

#: printrun/pronsole.py:855
msgid "Uploading %s"
msgstr ""

#: printrun/pronsole.py:857
msgid "Press Ctrl-C to interrupt upload."
msgstr ""

#: printrun/pronsole.py:860
msgid "Progress: "
msgstr ""

#: printrun/pronsole.py:872
msgid "Upload completed. %s should now be on the card."
msgstr ""

#: printrun/pronsole.py:875
msgid "...interrupted!"
msgstr ""

#: printrun/pronsole.py:881
msgid "A partial file named %s may have been written to the sd card."
msgstr ""

#: printrun/pronsole.py:898
msgid "Send a loaded gcode file to the printer. Load a file with the load command first."
msgstr ""

#: printrun/pronsole.py:900
msgid "Send a loaded gcode file to the printer. You have %s loaded right now."
msgstr ""

#: printrun/pronsole.py:904 printrun/pronterface.py:618
#: printrun/pronterface.py:1746
msgid "No file loaded. Please use load first."
msgstr ""

#: printrun/pronsole.py:909
msgid "Printing %s"
msgstr ""

#: printrun/pronsole.py:910
msgid "You can monitor the print with the monitor command."
msgstr ""

#: printrun/pronsole.py:918
msgid "Not printing, cannot pause."
msgstr ""

#: printrun/pronsole.py:924
msgid "Pauses a running print"
msgstr ""

#: printrun/pronsole.py:931
msgid "Not paused, unable to resume. Start a print first."
msgstr ""

#: printrun/pronsole.py:941
msgid "Resumes a paused print."
msgstr ""

#: printrun/pronsole.py:956
msgid "Files on SD card:"
msgstr ""

#: printrun/pronsole.py:970 printrun/pronsole.py:1012
#: printrun/pronsole.py:1333
msgid "Printer is not online. Please connect to it first."
msgstr ""

#: printrun/pronsole.py:975
msgid "Lists files on the SD card"
msgstr ""

#: printrun/pronsole.py:979 printrun/pronterface.py:1550
msgid "Opening file failed."
msgstr ""

#: printrun/pronsole.py:985 printrun/pronterface.py:1556
msgid "Starting print"
msgstr ""

#: printrun/pronsole.py:1008
msgid "Resets the printer."
msgstr ""

#: printrun/pronsole.py:1018
msgid "File is not present on card. Please upload it first."
msgstr ""

#: printrun/pronsole.py:1022
msgid "Printing file: %s from SD card."
msgstr ""

#: printrun/pronsole.py:1023
msgid "Requesting SD print..."
msgstr ""

#: printrun/pronsole.py:1027
msgid "Print a file from the SD card. Tab completes with available file names."
msgstr ""

#: printrun/pronsole.py:1028
msgid "sdprint filename.g"
msgstr ""

#: printrun/pronsole.py:1063 printrun/pronsole.py:1071
#: printrun/pronsole.py:1079 printrun/pronsole.py:1122
#: printrun/pronsole.py:1149 printrun/pronsole.py:1173
#: printrun/pronterface.py:557 printrun/pronterface.py:577
msgid "Printer is not online."
msgstr ""

#: printrun/pronsole.py:1101
msgid "Read the extruder and bed temperature."
msgstr ""

#: printrun/pronsole.py:1110 printrun/pronsole.py:1143
msgid "You must enter a temperature."
msgstr ""

#: printrun/pronsole.py:1115
msgid "%s is a high temperature to set your extruder to. Are you sure you want to do that?"
msgstr ""

#: printrun/pronsole.py:1120
msgid "Setting hotend temperature to %s degrees Celsius."
msgstr ""

#: printrun/pronsole.py:1124 printrun/pronterface.py:559
msgid "You cannot set negative temperatures. To turn the hotend off entirely, set its temperature to 0."
msgstr ""

#: printrun/pronsole.py:1127
msgid "Sets the hotend temperature to the value entered."
msgstr ""

#: printrun/pronsole.py:1128 printrun/pronsole.py:1155
msgid "Enter either a temperature in celsius or one of the following keywords"
msgstr ""

#: printrun/pronsole.py:1147
msgid "Setting bed temperature to %s degrees Celsius."
msgstr ""

#: printrun/pronsole.py:1151 printrun/pronterface.py:579
msgid "You cannot set negative temperatures. To turn the bed off entirely, set its temperature to 0."
msgstr ""

#: printrun/pronsole.py:1154
msgid "Sets the bed temperature to the value entered."
msgstr ""

#: printrun/pronsole.py:1167
msgid "You must specify the tool index as an integer."
msgstr ""

#: printrun/pronsole.py:1171
msgid "Using tool %d."
msgstr ""

#: printrun/pronsole.py:1175
msgid "You cannot set negative tool numbers."
msgstr ""

#: printrun/pronsole.py:1178
msgid "Switches to the specified tool (e.g. doing tool 1 will emit a T1 G-Code)."
msgstr ""

#: printrun/pronsole.py:1182
msgid "No move specified."
msgstr ""

#: printrun/pronsole.py:1185 printrun/pronsole.py:1247
#: printrun/pronsole.py:1287 printrun/pronsole.py:1426
msgid "Printer is currently printing. Please pause the print before you issue manual commands."
msgstr ""

#: printrun/pronsole.py:1188 printrun/pronsole.py:1423
msgid "Printer is not online. Unable to move."
msgstr ""

#: printrun/pronsole.py:1204
msgid "Unknown axis."
msgstr ""

#: printrun/pronsole.py:1209
msgid "Invalid distance"
msgstr ""

#: printrun/pronsole.py:1220
msgid "Move an axis. Specify the name of the axis and the amount. "
msgstr ""

#: printrun/pronsole.py:1221
msgid "move X 10 will move the X axis forward by 10mm at %s mm/min (default XY speed)"
msgstr ""

#: printrun/pronsole.py:1222
msgid "move Y 10 5000 will move the Y axis forward by 10mm at 5000mm/min"
msgstr ""

#: printrun/pronsole.py:1223
msgid "move Z -1 will move the Z axis down by 1mm at %s mm/min (default Z speed)"
msgstr ""

#: printrun/pronsole.py:1224
msgid "Common amounts are in the tabcomplete list."
msgstr ""

#: printrun/pronsole.py:1254 printrun/pronsole.py:1294
msgid "Invalid length given."
msgstr ""

#: printrun/pronsole.py:1259 printrun/pronsole.py:1299
msgid "Invalid speed given."
msgstr ""

#: printrun/pronsole.py:1264
msgid "Extruding %fmm of filament."
msgstr ""

#: printrun/pronsole.py:1266
msgid "Reversing %fmm of filament."
msgstr ""

#: printrun/pronsole.py:1268
msgid "Length is 0, not doing anything."
msgstr ""

#: printrun/pronsole.py:1274
msgid "Extrudes a length of filament, 5mm by default, or the number of mm given as a parameter"
msgstr ""

#: printrun/pronsole.py:1275
msgid "extrude - extrudes 5mm of filament at 300mm/min (5mm/s)"
msgstr ""

#: printrun/pronsole.py:1276
msgid "extrude 20 - extrudes 20mm of filament at 300mm/min (5mm/s)"
msgstr ""

#: printrun/pronsole.py:1277
msgid "extrude -5 - REVERSES 5mm of filament at 300mm/min (5mm/s)"
msgstr ""

#: printrun/pronsole.py:1278
msgid "extrude 10 210 - extrudes 10mm of filament at 210mm/min (3.5mm/s)"
msgstr ""

#: printrun/pronsole.py:1284
msgid "Printer is not online. Unable to reverse."
msgstr ""

#: printrun/pronsole.py:1303
msgid "Reverses the extruder, 5mm by default, or the number of mm given as a parameter"
msgstr ""

#: printrun/pronsole.py:1304
msgid "reverse - reverses 5mm of filament at 300mm/min (5mm/s)"
msgstr ""

#: printrun/pronsole.py:1305
msgid "reverse 20 - reverses 20mm of filament at 300mm/min (5mm/s)"
msgstr ""

#: printrun/pronsole.py:1306
msgid "reverse 10 210 - extrudes 10mm of filament at 210mm/min (3.5mm/s)"
msgstr ""

#: printrun/pronsole.py:1307
msgid "reverse -5 - EXTRUDES 5mm of filament at 300mm/min (5mm/s)"
msgstr ""

#: printrun/pronsole.py:1323
msgid "Exiting program. Goodbye!"
msgstr ""

#: printrun/pronsole.py:1328
msgid "Disconnects from the printer and exits the program."
msgstr ""

#: printrun/pronsole.py:1336
msgid "Printer is not printing. Please print something before monitoring."
msgstr ""

#: printrun/pronsole.py:1338
msgid "Monitoring printer, use ^C to interrupt."
msgstr ""

#: printrun/pronsole.py:1343 printrun/pronterface.py:1356
msgid "Invalid period given."
msgstr ""

#: printrun/pronsole.py:1344
msgid "Updating values every %f seconds."
msgstr ""

#: printrun/pronsole.py:1355 printrun/pronsole.py:1358
msgid "Print progress: "
msgstr ""

#: printrun/pronsole.py:1366 printrun/pronterface.py:1361
msgid "Done monitoring."
msgstr ""

#: printrun/pronsole.py:1370
msgid "Monitor a machine's temperatures and an SD print's status."
msgstr ""

#: printrun/pronsole.py:1371
msgid "monitor - Reports temperature and SD print status (if SD printing) every 5 seconds"
msgstr ""

#: printrun/pronsole.py:1372
msgid "monitor 2 - Reports temperature and SD print status (if SD printing) every 2 seconds"
msgstr ""

#: printrun/pronsole.py:1380
msgid "No file name given."
msgstr ""

#: printrun/pronsole.py:1386
msgid "Skeining file: %s"
msgstr ""

#: printrun/pronsole.py:1388 printrun/pronterface.py:1695
msgid "File not found!"
msgstr ""

#: printrun/pronsole.py:1393
msgid "Entering slicer settings: %s"
msgstr ""

#: printrun/pronsole.py:1397
msgid "Slicing: "
msgstr ""

#: printrun/pronsole.py:1400
msgid "Loading sliced file."
msgstr ""

#: printrun/pronsole.py:1403
msgid "Slicing failed: %s"
msgstr ""

#: printrun/pronsole.py:1416
msgid "Creates a gcode file from an stl model using the slicer (with tab-completion)"
msgstr ""

#: printrun/pronsole.py:1417
msgid "skein filename.stl - create gcode file"
msgstr ""

#: printrun/pronsole.py:1418
msgid "skein filename.stl view - create gcode file and view using skeiniso"
msgstr ""

#: printrun/pronsole.py:1419
msgid "skein set - adjust slicer settings"
msgstr ""

#: printrun/pronsole.py:1441
msgid "Homes the printer"
msgstr ""

#: printrun/pronsole.py:1442
msgid "home - homes all axes and zeroes the extruder(Using G28 and G92)"
msgstr ""

#: printrun/pronsole.py:1443
msgid "home xy - homes x and y axes (Using G28)"
msgstr ""

#: printrun/pronsole.py:1444
msgid "home z - homes z axis only (Using G28)"
msgstr ""

#: printrun/pronsole.py:1445
msgid "home e - set extruder position to zero (Using G92)"
msgstr ""

#: printrun/pronsole.py:1446
msgid "home xyze - homes all axes and zeroes the extruder (Using G28 and G92)"
msgstr ""

#: printrun/pronsole.py:1454
msgid "; Motors off"
msgstr ""

#: printrun/pronsole.py:1456
msgid "; Extruder off"
msgstr ""

#: printrun/pronsole.py:1458
msgid "; Heatbed off"
msgstr ""

#: printrun/pronsole.py:1460
msgid "; Fan off"
msgstr ""

#: printrun/pronsole.py:1462
msgid "; Power supply off"
msgstr ""

#: printrun/pronsole.py:1465
msgid "Printer is not online. Unable to turn it off."
msgstr ""

#: printrun/pronsole.py:1468
msgid "Turns off everything on the printer"
msgstr ""

#: printrun/pronsole.py:1471
msgid "load this file on startup instead of .pronsolerc ; you may chain config files, if so settings auto-save will use the last specified file"
msgstr ""

#: printrun/pronsole.py:1472
msgid "executes command after configuration/.pronsolerc is loaded ; macros/settings from these commands are not autosaved"
msgstr ""

#: printrun/pronsole.py:1473
msgid "file to load"
msgstr ""

#: printrun/pronterface.py:135
msgid "Width"
msgstr ""

#: printrun/pronterface.py:138
msgid "Depth"
msgstr ""

#: printrun/pronterface.py:141
msgid "Height"
msgstr ""

#: printrun/pronterface.py:144
msgid "X offset"
msgstr ""

#: printrun/pronterface.py:147
msgid "Y offset"
msgstr ""

#: printrun/pronterface.py:150
msgid "Z offset"
msgstr ""

#: printrun/pronterface.py:153
msgid "X home pos."
msgstr ""

#: printrun/pronterface.py:156
msgid "Y home pos."
msgstr ""

#: printrun/pronterface.py:159
msgid "Z home pos."
msgstr ""

#: printrun/pronterface.py:201
msgid "Path to the simarrange binary to use in the STL plater"
msgstr ""

#: printrun/pronterface.py:201
msgid "Simarrange command"
msgstr ""

#: printrun/pronterface.py:202
msgid "Extruders count"
msgstr ""

#: printrun/pronterface.py:202
msgid "Number of extruders"
msgstr ""

#: printrun/pronterface.py:203
msgid "Build dimensions"
msgstr ""

#: printrun/pronterface.py:203
msgid ""
"Dimensions of Build Platform\n"
" & optional offset of origin\n"
" & optional switch position\n"
"\n"
"Examples:\n"
"   XXXxYYY\n"
"   XXX,YYY,ZZZ\n"
"   XXXxYYYxZZZ+OffX+OffY+OffZ\n"
"XXXxYYYxZZZ+OffX+OffY+OffZ+HomeX+HomeY+HomeZ"
msgstr ""

#: printrun/pronterface.py:204
msgid "Clamp manual moves"
msgstr ""

#: printrun/pronterface.py:204
msgid "Prevent manual moves from leaving the specified build dimensions"
msgstr ""

#: printrun/pronterface.py:205
msgid "Background color"
msgstr ""

#: printrun/pronterface.py:205
msgid "Pronterface background color"
msgstr ""

#: printrun/pronterface.py:206
msgid "Interface mode"
msgstr ""

#: printrun/pronterface.py:206
msgid ""
"Standard interface is a one-page, three columns layout with controls/visualization/log\n"
"Compact mode is a one-page, two columns layout with controls + log/visualization\n"
"Tabbed mode is a two-pages mode, where the first page shows controls and the second one shows visualization and log."
msgstr ""

#: printrun/pronterface.py:207
msgid "Add a menu to select Slic3r profiles directly from Pronterface"
msgstr ""

#: printrun/pronterface.py:207
msgid "Enable Slic3r integration"
msgstr ""

#: printrun/pronterface.py:208
msgid "Update Slic3r default presets"
msgstr ""

#: printrun/pronterface.py:208
msgid "When selecting a profile in Slic3r integration menu, also save it as the default Slic3r preset"
msgstr ""

#: printrun/pronterface.py:209
msgid "Main visualization"
msgstr ""

#: printrun/pronterface.py:209
msgid "Select visualization for main window."
msgstr ""

#: printrun/pronterface.py:210
msgid "Use 3D in GCode viewer window"
msgstr ""

#: printrun/pronterface.py:210
msgid "Use 3D mode instead of 2D layered mode in the visualization window"
msgstr ""

#: printrun/pronterface.py:211
msgid "Use a lighter 3D visualization"
msgstr ""

#: printrun/pronterface.py:211
msgid "Use a lighter visualization with simple lines instead of extruded paths for 3D viewer"
msgstr ""

#: printrun/pronterface.py:212
msgid "Display temperature graph"
msgstr ""

#: printrun/pronterface.py:212
msgid "Display time-lapse temperature graph"
msgstr ""

#: printrun/pronterface.py:213
msgid "Display graphical gauges for temperatures visualization"
msgstr ""

#: printrun/pronterface.py:213
msgid "Display temperature gauges"
msgstr ""

#: printrun/pronterface.py:214
msgid "Display a checkbox that, when check, locks most of Pronterface"
msgstr ""

#: printrun/pronterface.py:214
msgid "Display interface lock checkbox"
msgstr ""

#: printrun/pronterface.py:215
msgid "If lock checkbox is enabled, lock the interface when starting a print"
msgstr ""

#: printrun/pronterface.py:215
msgid "Lock interface upon print start"
msgstr ""

#: printrun/pronterface.py:221
msgid "Preview extrusion width"
msgstr ""

#: printrun/pronterface.py:221
msgid "Width of Extrusion in Preview"
msgstr ""

#: printrun/pronterface.py:222
msgid "Fine Grid Spacing"
msgstr ""

#: printrun/pronterface.py:222
msgid "Fine grid spacing"
msgstr ""

#: printrun/pronterface.py:223
msgid "Coarse Grid Spacing"
msgstr ""

#: printrun/pronterface.py:223
msgid "Coarse grid spacing"
msgstr ""

#: printrun/pronterface.py:224
msgid "Changing most settings here will require restart to get effect"
msgstr ""

#: printrun/pronterface.py:224
msgid "Note:"
msgstr ""

#: printrun/pronterface.py:231
msgid "Pronterface"
msgstr ""

#: printrun/pronterface.py:252
msgid "Motors off"
msgstr ""

#: printrun/pronterface.py:252
msgid "Switch all motors off"
msgstr ""

#: printrun/pronterface.py:253
msgid "Check current hotend temperature"
msgstr ""

#: printrun/pronterface.py:253
msgid "Check temp"
msgstr ""

#: printrun/pronterface.py:254
msgid "Advance extruder by set length"
msgstr ""

#: printrun/pronterface.py:254
msgid "Extrude"
msgstr ""

#: printrun/pronterface.py:255
msgid "Reverse"
msgstr ""

#: printrun/pronterface.py:255
msgid "Reverse extruder by set length"
msgstr ""

#: printrun/pronterface.py:300
msgid ""
"# I moved all your custom buttons into .pronsolerc.\n"
"# Please don't add them here any more.\n"
"# Backup of your old buttons is in custombtn.old\n"
msgstr ""

#: printrun/pronterface.py:305
msgid "Note!!! You have specified custom buttons in both custombtn.txt and .pronsolerc"
msgstr ""

#: printrun/pronterface.py:306
msgid "Ignoring custombtn.txt. Remove all current buttons to revert to custombtn.txt"
msgstr ""

#: printrun/pronterface.py:344
msgid "automatically try to connect to printer on startup"
msgstr ""

#: printrun/pronterface.py:353
msgid "Print resumed at: %s"
msgstr ""

#: printrun/pronterface.py:355
msgid "Print started at: %s"
msgstr ""

#: printrun/pronterface.py:363
msgid "Print ended at: %(end_time)s and took %(duration)s"
msgstr ""

#: printrun/pronterface.py:377
msgid "Printer is now online."
msgstr ""

#: printrun/pronterface.py:381
msgid "Disconnect"
msgstr ""

#: printrun/pronterface.py:554
msgid "Setting hotend temperature to %f degrees Celsius."
msgstr ""

#: printrun/pronterface.py:561 printrun/pronterface.py:581
msgid "You must enter a temperature. (%s)"
msgstr ""

#: printrun/pronterface.py:574
msgid "Setting bed temperature to %f degrees Celsius."
msgstr ""

#: printrun/pronterface.py:596
msgid "Do you want to erase the macro?"
msgstr ""

#: printrun/pronterface.py:600
msgid "Cancelled."
msgstr ""

#: printrun/pronterface.py:628
msgid " Opens file"
msgstr ""

#: printrun/pronterface.py:628
msgid "&Open..."
msgstr ""

#: printrun/pronterface.py:629
msgid " Clear output console"
msgstr ""

#: printrun/pronterface.py:629
msgid "Clear console"
msgstr ""

#: printrun/pronterface.py:630
msgid " Closes the Window"
msgstr ""

#: printrun/pronterface.py:630
msgid "E&xit"
msgstr ""

#: printrun/pronterface.py:631
msgid "&File"
msgstr ""

#: printrun/pronterface.py:634
msgid " Edit open file"
msgstr ""

#: printrun/pronterface.py:634
msgid "&Edit..."
msgstr ""

#: printrun/pronterface.py:635
msgid " Compose 3D models into a single plate"
msgstr ""

#: printrun/pronterface.py:635
msgid "Plater"
msgstr ""

#: printrun/pronterface.py:636
msgid " Exclude parts of the bed from being printed"
msgstr ""

#: printrun/pronterface.py:636
msgid "Excluder"
msgstr ""

#: printrun/pronterface.py:637
msgid " Project slices"
msgstr ""

#: printrun/pronterface.py:637
msgid "Projector"
msgstr ""

#: printrun/pronterface.py:638
msgid "&Tools"
msgstr ""

#: printrun/pronterface.py:641
msgid " Recover previous print after a disconnect (homes X, Y, restores Z and E status)"
msgstr ""

#: printrun/pronterface.py:641
msgid "Recover"
msgstr ""

#: printrun/pronterface.py:644
msgid "&Advanced"
msgstr ""

#: printrun/pronterface.py:648
msgid "&Slic3r"
msgstr ""

#: printrun/pronterface.py:652
msgid "Print &settings"
msgstr ""

#: printrun/pronterface.py:653
msgid "&Filament"
msgstr ""

#: printrun/pronterface.py:654
msgid "&Printer"
msgstr ""

#: printrun/pronterface.py:663
msgid "&Macros"
msgstr ""

#: printrun/pronterface.py:664
msgid "<&New...>"
msgstr ""

#: printrun/pronterface.py:665
msgid " Options dialog"
msgstr ""

#: printrun/pronterface.py:665
msgid "&Options"
msgstr ""

#: printrun/pronterface.py:667
msgid " Adjust slicing settings"
msgstr ""

#: printrun/pronterface.py:667
msgid "Slicing Settings"
msgstr ""

#: printrun/pronterface.py:669
msgid "Debug G-code"
msgstr ""

#: printrun/pronterface.py:670
msgid "Print all G-code sent to and received from the printer."
msgstr ""

#: printrun/pronterface.py:680
msgid "&Settings"
msgstr ""

#: printrun/pronterface.py:686
msgid "&About Printrun"
msgstr ""

#: printrun/pronterface.py:686
msgid "Show about dialog"
msgstr ""

#: printrun/pronterface.py:687
msgid "&?"
msgstr ""

#: printrun/pronterface.py:697
msgid "Printrun is a pure Python 3D printing (and other types of CNC) host software."
msgstr ""

#: printrun/pronterface.py:791
msgid "Enter macro name"
msgstr ""

#: printrun/pronterface.py:794
msgid "Macro name:"
msgstr ""

#: printrun/pronterface.py:797
msgid "Ok"
msgstr ""

#: printrun/pronterface.py:819
msgid "Macro name may contain only ASCII alphanumeric symbols and underscores"
msgstr ""

#: printrun/pronterface.py:822
msgid "Name '%s' is being used by built-in command"
msgstr ""

#: printrun/pronterface.py:877
msgid "Plate function activated"
msgstr ""

#: printrun/pronterface.py:884
msgid "Plated %s"
msgstr ""

#: printrun/pronterface.py:890
msgid "SD Upload"
msgstr ""

#: printrun/pronterface.py:894
msgid "SD Print"
msgstr ""

#: printrun/pronterface.py:977
msgid "Execute command: "
msgstr ""

#: printrun/pronterface.py:988
msgid "click to add new custom button"
msgstr ""

#: printrun/pronterface.py:1005
msgid "Defines custom button. Usage: button <num> \"title\" [/c \"colour\"] command"
msgstr ""

#: printrun/pronterface.py:1027
msgid "Custom button number should be between 0 and 63"
msgstr ""

#: printrun/pronterface.py:1118
msgid "Edit custom button '%s'"
msgstr ""

#: printrun/pronterface.py:1120
msgid "Move left <<"
msgstr ""

#: printrun/pronterface.py:1123
msgid "Move right >>"
msgstr ""

#: printrun/pronterface.py:1127
msgid "Remove custom button '%s'"
msgstr ""

#: printrun/pronterface.py:1130
msgid "Add custom button"
msgstr ""

#: printrun/pronterface.py:1268
msgid "Manual move outside of the build volume prevented (see the \"Clamp manual moves\" option)."
msgstr ""

#: printrun/pronterface.py:1324
msgid "event object missing"
msgstr ""

#: printrun/pronterface.py:1359
msgid "Monitoring printer."
msgstr ""

#: printrun/pronterface.py:1376
msgid "Attempted to write invalid text to console, which could be due to an invalid baudrate"
msgstr ""

#: printrun/pronterface.py:1454
msgid "SD upload: %04.2f%% |"
msgstr ""

#: printrun/pronterface.py:1455 printrun/pronterface.py:1469
msgid " Line# %d of %d lines |"
msgstr ""

#: printrun/pronterface.py:1458
msgid "SD printing: %04.2f%% |"
msgstr ""

#: printrun/pronterface.py:1463 printrun/pronterface.py:1473
msgid " Est: %s of %s remaining | "
msgstr ""

#: printrun/pronterface.py:1465 printrun/pronterface.py:1475
msgid " Z: %.3f mm"
msgstr ""

#: printrun/pronterface.py:1468
msgid "Printing: %04.2f%% |"
msgstr ""

#: printrun/pronterface.py:1480
msgid "Disconnecting after 4 failed writes."
msgstr ""

#: printrun/pronterface.py:1577
msgid "Pick SD file"
msgstr ""

#: printrun/pronterface.py:1577
msgid "Select the file to print"
msgstr ""

#: printrun/pronterface.py:1613 printrun/pronterface.py:1654
msgid "Slicing "
msgstr ""

#: printrun/pronterface.py:1622
msgid "Failed to execute slicing software: "
msgstr ""

#: printrun/pronterface.py:1629
msgid "Slicing..."
msgstr ""

#: printrun/pronterface.py:1640 printrun/pronterface.py:1641
#: printrun/pronterface.py:1707 printrun/pronterface.py:1708
msgid "Loaded %s, %d lines"
msgstr ""

#: printrun/pronterface.py:1648
msgid "Load File"
msgstr ""

#: printrun/pronterface.py:1686
msgid "Open file to print"
msgstr ""

#: printrun/pronterface.py:1687
msgid "OBJ, STL, and GCODE files (*.gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ)|*.gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ|All Files (*.*)|*.*"
msgstr ""

#: printrun/pronterface.py:1721
msgid "mm of filament used in this print"
msgstr ""

#: printrun/pronterface.py:1722
msgid "The print goes:"
msgstr ""

#: printrun/pronterface.py:1723
msgid "- from %.2f mm to %.2f mm in X and is %.2f mm wide"
msgstr ""

#: printrun/pronterface.py:1724
msgid "- from %.2f mm to %.2f mm in Y and is %.2f mm deep"
msgstr ""

#: printrun/pronterface.py:1725
msgid "- from %.2f mm to %.2f mm in Z and is %.2f mm high"
msgstr ""

#: printrun/pronterface.py:1726
msgid "Estimated duration: %s"
msgstr ""

#: printrun/pronterface.py:1757
msgid "Restart"
msgstr ""

#: printrun/pronterface.py:1761
msgid "File upload complete"
msgstr ""

#: printrun/pronterface.py:1780
msgid "Pick SD filename"
msgstr ""

#: printrun/pronterface.py:1789
msgid "Print paused at: %s"
msgstr ""

#: printrun/pronterface.py:1801
msgid "Resume"
msgstr ""

#: printrun/pronterface.py:1803
msgid "Resuming."
msgstr ""

#: printrun/pronterface.py:1816
msgid "Connecting..."
msgstr ""

#: printrun/pronterface.py:1828
msgid "Could not parse baud rate: "
msgstr ""

#: printrun/pronterface.py:1843
msgid "Error: You are trying to connect to a non-existing port."
msgstr ""

#: printrun/pronterface.py:1845
msgid "Error: You don't have permission to open %s."
msgstr ""

#: printrun/pronterface.py:1846
msgid "You might need to add yourself to the dialout group."
msgstr ""

#: printrun/pronterface.py:1879
msgid "Disconnected."
msgstr ""

#: printrun/pronterface.py:1912
msgid "Reset."
msgstr ""

#: printrun/pronterface.py:1913
msgid "Are you sure you want to reset the printer?"
msgstr ""

#: printrun/pronterface.py:1913
msgid "Reset?"
msgstr ""

#: printrun/pronterface.py:1930
msgid "Locking interface."
msgstr ""

#: printrun/pronterface.py:1934
msgid "Unlocking interface."
msgstr ""

#: printrun/pronterface_widgets.py:36
msgid "Find"
msgstr ""

#: printrun/pronterface_widgets.py:38
msgid "Save"
msgstr ""

#: printrun/pronterface_widgets.py:70
msgid "Not Found!"
msgstr ""

#: printrun/pronterface_widgets.py:124
msgid "Printer settings"
msgstr ""

#: printrun/pronterface_widgets.py:125
msgid "User interface"
msgstr ""

#: printrun/pronterface_widgets.py:126
msgid "External commands"
msgstr ""

#: printrun/pronterface_widgets.py:131
msgid "Edit settings"
msgstr ""

#: printrun/pronterface_widgets.py:134
msgid "Settings"
msgstr ""

#: printrun/pronterface_widgets.py:186
msgid "Custom button"
msgstr ""

#: printrun/pronterface_widgets.py:192
msgid "Button title"
msgstr ""

#: printrun/pronterface_widgets.py:195
msgid "Command"
msgstr ""

#: printrun/pronterface_widgets.py:204
msgid "Color"
msgstr ""