Skip to content

P
Printrun
Commit 9c3f821b authored by Nicolas Dandrimont's avatar Nicolas Dandrimont
Browse files
Options

Refactor the README to make packaged binaries more obvious

parent 930a4334
Show whitespace changes
Inline Side-by-side
Showing with 85 additions and 54 deletions
README.md
View file @ 9c3f821b
...@@ -5,80 +5,44 @@ Printrun consists of printcore, pronsole and pronterface, and a small collection ...@@ -5,80 +5,44 @@ Printrun consists of printcore, pronsole and pronterface, and a small collection
* pronterface.py is a graphical host software with the same functionality as pronsole * pronterface.py is a graphical host software with the same functionality as pronsole
* webinterface.py is a browser-usable remote control function for Pronterface * webinterface.py is a browser-usable remote control function for Pronterface
# INSTALLING DEPENDENCIES # GETTING PRINTRUN
## Windows This section suggests using precompiled binaries, this way you get everything bundled into one single package for an easy installation.
A precompiled version is available at http://koti.kapsi.fi/~kliment/printrun/
Download the following, and install in this order:
1. http://python.org/ftp/python/2.7.2/python-2.7.2.msi
2. http://pypi.python.org/packages/any/p/pyserial/pyserial-2.5.win32.exe
3. http://downloads.sourceforge.net/wxpython/wxPython2.8-win32-unicode-2.8.12.0-py27.exe
4. http://launchpad.net/pyreadline/1.7/1.7/+download/pyreadline-1.7.win32.exe
5. http://pyglet.googlecode.com/files/pyglet-1.1.4.zip
For the last one, you will need to unpack it, open a command terminal,
go into the the directory you unpacked it in and run
`python setup.py install`
## Ubuntu/Debian If you want the newest, shiniest features, you can run Printrun from source using the instructions further down this README.
`sudo apt-get install python-serial python-wxgtk2.8 python-pyglet`
## Fedora 15
`sudo yum install pyserial wxpython pyglet`
## Mac OS X Lion ## Windows
A precompiled version is available at http://koti.kapsi.fi/~kliment/printrun/ A precompiled version is available at http://koti.kapsi.fi/~kliment/printrun/
1. Ensure that the active Python is the system version. (`brew uninstall python` or other appropriate incantations) ## Mac OS X
2. Download an install [wxPython2.8-osx-unicode] matching to your python version (most likely 2.7 on Lion,
check with: python --version) from: http://wxpython.org/download.php#stable
Known to work PythonWX: http://superb-sea2.dl.sourceforge.net/project/wxpython/wxPython/2.8.12.1/wxPython2.8-osx-unicode-2.8.12.1-universal-py2.7.dmg
3. Download and unpack pyserial from http://pypi.python.org/packages/source/p/pyserial/pyserial-2.5.tar.gz
4. In a terminal, change to the folder you unzipped to, then type in: `sudo python setup.py install`
5. Repeat 4. with http://http://pyglet.googlecode.com/files/pyglet-1.1.4.zip
The tools will probably run just fine in 64bit on Lion, you don't need to mess
with any of the 32bit settings. In case they don't, try
5. export VERSIONER_PYTHON_PREFER_32_BIT=yes
in a terminal before running Pronterface
## Mac OS X (pre Lion)
A precompiled version is available at http://koti.kapsi.fi/~kliment/printrun/ A precompiled version is available at http://koti.kapsi.fi/~kliment/printrun/
1. Download and install http://downloads.sourceforge.net/wxpython/wxPython2.8-osx-unicode-2.8.12.0-universal-py2.6.dmg ## Linux
2. Grab the source for pyserial from http://pypi.python.org/packages/source/p/pyserial/pyserial-2.5.tar.gz ### Ubuntu/Debian
3. Unzip pyserial to a folder. Then, in a terminal, change to the folder you unzipped to, then type in:
`defaults write com.apple.versioner.python Prefer-32-Bit -bool yes` You can run Printrun directly from source, as there are no packages available yet. Fetch and install the dependencies using
`sudo python setup.py install` `sudo apt-get install python-serial python-wxgtk2.8 python-pyglet`
Alternatively, you can run python in 32 bit mode by setting the following environment variable before running the setup.py command: ### Fedora 15 and newer
This alternative approach is confirmed to work on Mac OS X 10.6.8. You can run Printrun directly from source, as there are no packages available yet. Fetch and install the dependencies using
`export VERSIONER_PYTHON_PREFER_32_BIT=yes` `sudo yum install pyserial wxpython pyglet`
`sudo python setup.py install` ### Archlinux
Then repeat the same with http://http://pyglet.googlecode.com/files/pyglet-1.1.4.zip Packages are available in AUR. Just run
# USING PRONTERFACE `yaourt printrun`
To use pronterface, you need: and enjoy the `pronterface`, `pronsole`, ... commands directly.
* python (ideally 2.6.x or 2.7.x), # USING PRONTERFACE
* pyserial (or python-serial on ubuntu/debian),
* pyglet
* pyreadline (not needed on Linux) and
* wxPython
Download and install the above, and start pronterface.py When you're done setting up Printrun, you can start pronterface.py in the directory you unpacked it.
Select the port name you are using from the first drop-down, select your baud rate, and hit connect. Select the port name you are using from the first drop-down, select your baud rate, and hit connect.
Load an STL (see the note on skeinforge below) or GCODE file, and you can upload it to SD or print it directly. Load an STL (see the note on skeinforge below) or GCODE file, and you can upload it to SD or print it directly.
The "monitor printer" function, when enabled, checks the printer state (temperatures, SD print progress) every 3 seconds. The "monitor printer" function, when enabled, checks the printer state (temperatures, SD print progress) every 3 seconds.
...@@ -133,6 +97,73 @@ sender, or the following code example: ...@@ -133,6 +97,73 @@ sender, or the following code example:
p.resume() p.resume()
p.disconnect() p.disconnect()
# RUNNING FROM SOURCE
Run Printrun for source if you want to test out the latest features.
## Dependencies
To use pronterface, you need:
* python (ideally 2.6.x or 2.7.x),
* pyserial (or python-serial on ubuntu/debian),
* pyglet
* pyreadline (not needed on Linux) and
* wxPython
Please see specific instructions for Windows and Mac OS X below. Under Linux, you should use your package manager directly (see the "GETTING PRINTRUN" section)
## Windows
Download the following, and install in this order:
1. http://python.org/ftp/python/2.7.2/python-2.7.2.msi
2. http://pypi.python.org/packages/any/p/pyserial/pyserial-2.5.win32.exe
3. http://downloads.sourceforge.net/wxpython/wxPython2.8-win32-unicode-2.8.12.0-py27.exe
4. http://launchpad.net/pyreadline/1.7/1.7/+download/pyreadline-1.7.win32.exe
5. http://pyglet.googlecode.com/files/pyglet-1.1.4.zip
For the last one, you will need to unpack it, open a command terminal,
go into the the directory you unpacked it in and run
`python setup.py install`
## Mac OS X Lion
1. Ensure that the active Python is the system version. (`brew uninstall python` or other appropriate incantations)
2. Download an install [wxPython2.8-osx-unicode] matching to your python version (most likely 2.7 on Lion,
check with: python --version) from: http://wxpython.org/download.php#stable
Known to work PythonWX: http://superb-sea2.dl.sourceforge.net/project/wxpython/wxPython/2.8.12.1/wxPython2.8-osx-unicode-2.8.12.1-universal-py2.7.dmg
3. Download and unpack pyserial from http://pypi.python.org/packages/source/p/pyserial/pyserial-2.5.tar.gz
4. In a terminal, change to the folder you unzipped to, then type in: `sudo python setup.py install`
5. Repeat 4. with http://http://pyglet.googlecode.com/files/pyglet-1.1.4.zip
The tools will probably run just fine in 64bit on Lion, you don't need to mess
with any of the 32bit settings. In case they don't, try
5. export VERSIONER_PYTHON_PREFER_32_BIT=yes
in a terminal before running Pronterface
## Mac OS X (pre Lion)
A precompiled version is available at http://koti.kapsi.fi/~kliment/printrun/
1. Download and install http://downloads.sourceforge.net/wxpython/wxPython2.8-osx-unicode-2.8.12.0-universal-py2.6.dmg
2. Grab the source for pyserial from http://pypi.python.org/packages/source/p/pyserial/pyserial-2.5.tar.gz
3. Unzip pyserial to a folder. Then, in a terminal, change to the folder you unzipped to, then type in:
`defaults write com.apple.versioner.python Prefer-32-Bit -bool yes`
`sudo python setup.py install`
Alternatively, you can run python in 32 bit mode by setting the following environment variable before running the setup.py command:
This alternative approach is confirmed to work on Mac OS X 10.6.8.
`export VERSIONER_PYTHON_PREFER_32_BIT=yes`
`sudo python setup.py install`
Then repeat the same with http://http://pyglet.googlecode.com/files/pyglet-1.1.4.zip
# LICENSE # LICENSE
``` ```
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment