Pronsole: Print all unknown responses

Updated readme

README

-This is the beginning of a python-based host software for reprap printers.
+This is a python-based host software for reprap printers, in various forms.
 
-Currently contains printcore.py, which requires pyserial to be installed.
+Printrun consists of printcore, pronsole and pronterface, and a small collection of helpful scripts.
 
-Using printcore:
+printcore.py is a library that makes writing reprap hosts easy
+pronsole.py is an interactive command-line host software with tabcompletion goodness
+pronterface.py is a graphical host software with the same functionality as pronsole
+
+USING PRONTERFACE
+
+To use pronterface, you need: 
+python (ideally 2.6.x or 2.7.x), 
+pyserial (or python-serial on ubuntu/debian), 
+pyreadline (not needed on Linux) and
+wxPython
+
+Download and install the above, and start pronterface.py
+Select the port name you are using from the first drop-down, select your baud rate, and hit connect.
+Load an STL (see the note on skeinforge below) or GCODE file, and you can upload it to SD or print it directly.
+The "monitor printer" function, when enabled, checks the printer state (temperatures, SD print progress) every 3 seconds.
+The command box recognizes all pronsole commands, but has no tabcompletion.
+
+If you want to load stl files, you need to put a version of skeinforge (doesn't matter which one) in a folder called "skeinforge".
+The "skeinforge" folder must be in the same folder as pronterface.py
+
+USING PRONSOLE
+
+To use pronsole, you need: 
+python (ideally 2.6.x or 2.7.x), 
+pyserial (or python-serial on ubuntu/debian) and
+pyreadline (not needed on Linux)
+
+Start pronsole and you will be greeted with a command prompt. Type help to view the available commands.
+All commands have internal help, which you can access by typing "help commandname", for example "help connect"
+
+If you want to load stl files, you need to put a version of skeinforge (doesn't matter which one) in a folder called "skeinforge".
+The "skeinforge" folder must be in the same folder as pronsole.py
+
+USING PRINTCORE:
+
+To use printcore you need python (ideally 2.6.x or 2.7.x) and pyserial (or python-serial on ubuntu/debian)
+See pronsole for an example of a full-featured host, the bottom of printcore.py for a simple command-line 
+sender, or the following code example:
 
 p=printcore('/dev/ttyUSB0',115200)
 p.startprint(data) # data is an array of gcode lines

pronsole.py

@@ -42,6 +42,8 @@ class pronsole(cmd.Cmd):
         self.macros={}
         self.processing_rc=False
         self.lastport = (None,None)
+        self.monitoring=0
+        
         
     def scanserial(self):
         """scan for available ports. return a list of device names."""
@@ -393,7 +395,7 @@ class pronsole(cmd.Cmd):
         if not self.p.online:
             print "Printer is not online. Try connect to it first."
             return
-        self.listing=0
+        self.listing=2
         self.sdfiles=[]
         self.recvlisteners+=[self.listfiles]
         self.p.send_now("M20")
@@ -440,7 +442,7 @@ class pronsole(cmd.Cmd):
         if not self.p.online:
             print "Printer is not online. Try connect to it first."
             return
-        self.listing=0
+        self.listing=2
         self.sdfiles=[]
         self.recvlisteners+=[self.listfiles]
         self.p.send_now("M20")
@@ -460,7 +462,7 @@ class pronsole(cmd.Cmd):
         
     def complete_sdprint(self, text, line, begidx, endidx):
         if self.sdfiles==[] and self.p.online:
-            self.listing=0
+            self.listing=2
             self.recvlisteners+=[self.listfiles]
             self.p.send_now("M20")
             time.sleep(0.5)
@@ -470,6 +472,11 @@ class pronsole(cmd.Cmd):
     def recvcb(self,l):
         if "T:" in l:
             self.tempreadings=l
+        tstring=l.replace("\r","").replace("\n","")
+        if(tstring!="ok" and not tstring.startswith("ok T") and not tstring.startswith("T:") and not self.listing and not self.monitoring):
+            print tstring
+            sys.stdout.write(self.prompt)
+            sys.stdout.flush()
         for i in self.recvlisteners:
             i(l)
     
@@ -712,6 +719,7 @@ class pronsole(cmd.Cmd):
             except:
                 print "Invalid period given."
         print "Updating values every %f seconds."%(interval,)
+        self.monitoring=1
         try:
             while(1):
                 self.p.send_now("M105")
@@ -728,6 +736,7 @@ class pronsole(cmd.Cmd):
         except:
             print "Done monitoring."
             pass
+        self.monitoring=0
             
     def help_monitor(self):
         print "Monitor a machine's temperatures and an SD print's status."

pronterface.py

@@ -90,8 +90,6 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         self.stdout=sys.stdout
         self.mini=False
         
-    #Commands to implement:
-    #settemp/bedtemp/extrude/reverse(control panel)
     
     def do_extrude(self,l=""):
         try: