Merge branch 'experimental' of github.com:kliment/Printrun into experimental

printcore.py

@@ -152,7 +152,8 @@ class printcore():
                     print _("Could not connect to %s:%s:") % (hostname, port)
                     self.printer = None
                     self.printer_tcp = None
-                    print _("Socket error %s: %s") % (e.errno, e.strerror)
+                    print _("Socket error %s:") % e.errno,
+                    print e.strerror
                     return
             else:
                 disable_hup(self.port)
@@ -225,18 +226,22 @@ class printcore():
                 # workaround cases where M105 was sent before printer Serial
                 # was online an empty line means read timeout was reached,
                 # meaning no data was received thus we count those empty lines,
-                # and once we have seen 5 in a row, we just break and send a
+                # and once we have seen 15 in a row, we just break and send a
                 # new M105
-                if not line: empty_lines += 1
+                # 15 was chosen based on the fact that it gives enough time for
+                # Gen7 bootloader to time out, and that the non received M105
+                # issues should be quite rare so we can wait for a long time
+                # before resending
+                if not line:
+                    empty_lines += 1
+                    if empty_lines == 15: break
                 else: empty_lines = 0
-                if empty_lines == 5: break
-                if line.startswith(tuple(self.greetings)) or line.startswith('ok'):
+                if line.startswith(tuple(self.greetings)) or line.startswith('ok') or "T:" in line:
                     if self.onlinecb:
                         try: self.onlinecb()
                         except: pass
                     self.online = True
                     return
-            time.sleep(0.25)
 
     def _listen(self):
         """This function acts on messages from the firmware
@@ -523,7 +528,7 @@ class printcore():
                 except: pass
             try:
                 self.printer.write(str(command + "\n"))
-                self.printer.flush()
+                if self.printer_tcp: self.printer.flush()
                 self.writefailures = 0
             except socket.error as e:
                 print "Can't write to printer (disconnected?) (Socket error {0}): {1}".format(e.errno, e.strerror)

printrun/gcoder.py

@@ -31,8 +31,7 @@ move_gcodes = ["G0", "G1", "G2", "G3"]
 class PyLine(object):
 
     __slots__ = ('x','y','z','e','f','i','j',
-                 'raw','split_raw',
-                 'command','is_move',
+                 'raw', 'command', 'is_move',
                  'relative','relative_e',
                  'current_x', 'current_y', 'current_z', 'extruding', 'current_tool',
                  'gcview_end_vertex')

printrun/graph.py

@@ -20,6 +20,15 @@ from math import log10, floor, ceil
 
 from bufferedcanvas import *
 
+class GraphWindow(wx.Frame):
+    def __init__(self, root, size = (600, 600)):
+        wx.Frame.__init__(self, None, title = _("Temperature graph"), size = size)
+        panel = wx.Panel(self, -1)
+        vbox = wx.BoxSizer(wx.VERTICAL)
+        self.graph = Graph(panel, wx.ID_ANY, root)
+        vbox.Add(self.graph, 1, wx.EXPAND)
+        panel.SetSizer(vbox)
+
 class Graph(BufferedCanvas):
     '''A class to show a Graph with Pronterface.'''
 
@@ -52,6 +61,20 @@ class Graph(BufferedCanvas):
         self.xbars      = 6 # One bar per 10 second
         self.xsteps     = 60 # Covering 1 minute in the graph
 
+        self.window = None
+
+    def showwin(self, event = None):
+        if not self.window:
+            self.window = GraphWindow(self.root)
+            self.window.Show()
+            if self.timer.IsRunning():
+                self.window.graph.StartPlotting(self.timer.Interval)
+        else:
+            self.window.Raise()
+
+    def __del__(self):
+        if self.window: self.window.Close()
+
     def OnPaint(self, evt):
         dc = wx.PaintDC(self)
         gc = wx.GraphicsContext.Create(dc)
@@ -197,6 +220,7 @@ class Graph(BufferedCanvas):
     def SetBedTemperature(self, value):
         self.bedtemps.pop()
         self.bedtemps.append(value)
+        if self.window: self.window.graph.SetBedTemperature(value)
 
     def AddBedTemperature(self, value):
         self.bedtemps.append(value)
@@ -206,6 +230,7 @@ class Graph(BufferedCanvas):
     def SetBedTargetTemperature(self, value):
         self.bedtargettemps.pop()
         self.bedtargettemps.append(value)
+        if self.window: self.window.graph.SetBedTargetTemperature(value)
 
     def AddBedTargetTemperature(self, value):
         self.bedtargettemps.append(value)
@@ -215,6 +240,7 @@ class Graph(BufferedCanvas):
     def SetExtruder0Temperature(self, value):
         self.extruder0temps.pop()
         self.extruder0temps.append(value)
+        if self.window: self.window.graph.SetExtruder0Temperature(value)
 
     def AddExtruder0Temperature(self, value):
         self.extruder0temps.append(value)
@@ -224,6 +250,7 @@ class Graph(BufferedCanvas):
     def SetExtruder0TargetTemperature(self, value):
         self.extruder0targettemps.pop()
         self.extruder0targettemps.append(value)
+        if self.window: self.window.graph.SetExtruder0TargetTemperature(value)
 
     def AddExtruder0TargetTemperature(self, value):
         self.extruder0targettemps.append(value)
@@ -233,6 +260,7 @@ class Graph(BufferedCanvas):
     def SetExtruder1Temperature(self, value):
         self.extruder1temps.pop()
         self.extruder1temps.append(value)
+        if self.window: self.window.graph.SetExtruder1Temperature(value)
 
     def AddExtruder1Temperature(self, value):
         self.extruder1temps.append(value)
@@ -242,6 +270,7 @@ class Graph(BufferedCanvas):
     def SetExtruder1TargetTemperature(self, value):
         self.extruder1targettemps.pop()
         self.extruder1targettemps.append(value)
+        if self.window: self.window.graph.SetExtruder1TargetTemperature(value)
 
     def AddExtruder1TargetTemperature(self, value):
         self.extruder1targettemps.append(value)
@@ -251,10 +280,12 @@ class Graph(BufferedCanvas):
     def StartPlotting(self, time):
         self.Refresh()
         self.timer.Start(time)
+        if self.window: self.window.graph.StartPlotting(time)
 
     def StopPlotting(self):
         self.timer.Stop()
         self.Refresh()
+        if self.window: self.window.graph.StopPlotting()
 
     def draw(self, dc, w, h):
         dc.SetBackground(wx.Brush(self.root.settings.bgcolor))

printrun/gui.py

@@ -171,6 +171,7 @@ def add_extra_controls(self, root, parentpanel, extra_buttons = None):
             self.Add(root.graph, pos = (base_line + 5, 0), span = (3, 6))
         else:
             self.Add(root.graph, pos = (base_line + 2, 5), span = (3, 1))
+        root.graph.Bind(wx.EVT_LEFT_DOWN, root.graph.showwin)
 
     if extra_buttons:
         pos_mapping = {

printrun/libtatlin/actors.py

@@ -295,7 +295,7 @@ class GcodeModel(Model):
 
     def copy(self):
         copy = GcodeModel()
-        for var in ["vertices", "colors", "max_layers", "num_layers_to_draw", "printed_until", "layer_stops"]:
+        for var in ["vertices", "colors", "max_layers", "num_layers_to_draw", "printed_until", "layer_stops", "dims"]:
             setattr(copy, var, getattr(self, var))
         copy.loaded = True
         copy.initialized = False

pronsole.py

@@ -539,6 +539,7 @@ class pronsole(cmd.Cmd):
         if ls.startswith('!'):
             return ws + ls[1:] + "\n" # python mode
         else:
+            ls = ls.replace('"','\\"') # need to escape double quotes
             ret = ws + 'self.parseusercmd("'+ls+'".format(*arg))\n' # parametric command mode
             return ret + ws + 'self.onecmd("'+ls+'".format(*arg))\n'
 
@@ -576,7 +577,7 @@ class pronsole(cmd.Cmd):
             self.logError("Macro '"+macro_name+"' is not defined")
     def do_macro(self, args):
         if args.strip()=="":
-            self.print_topics("User-defined macros", self.macros.keys(), 15, 80)
+            self.print_topics("User-defined macros", map(str,self.macros.keys()), 15, 80)
             return
         arglist = args.split(None, 1)
         macro_name = arglist[0]
@@ -1430,6 +1431,9 @@ class pronsole(cmd.Cmd):
         self.processing_args = False
         if args.filename:
             filename = args.filename.decode(locale.getpreferredencoding())
+            self.cmdline_filename_callback(filename)
+
+    def cmdline_filename_callback(self, filename):
         self.do_load(filename)
 
     def parse_cmdline(self, args):

pronterface.py

@@ -50,7 +50,7 @@ import pronsole
 from pronsole import dosify, wxSetting, HiddenSetting, StringSetting, SpinSetting, FloatSpinSetting, BooleanSetting, StaticTextSetting
 from printrun import gcoder
 
-tempreport_exp = re.compile("([TB]\d*):([-+]?\d*\.?\d*)(?: \/)?([-+]?\d*\.?\d*)")
+tempreport_exp = re.compile("([TB]\d*):([-+]?\d*\.?\d*)(?: ?\/)?([-+]?\d*\.?\d*)")
 
 def parse_temperature_report(report):
     matches = tempreport_exp.findall(report)
@@ -1226,15 +1226,32 @@ class PronterWindow(MainWindow, pronsole.pronsole):
             if "T0" in temps:
                 hotend_temp = float(temps["T0"][0])
             else:
-                hotend_temp = float(temps["T"][0]) if "T" in temps else -1.0
+                hotend_temp = float(temps["T"][0]) if "T" in temps else None
+            if hotend_temp is not None:
                 if self.display_graph: wx.CallAfter(self.graph.SetExtruder0Temperature, hotend_temp)
                 if self.display_gauges: wx.CallAfter(self.hottgauge.SetValue, hotend_temp)
+                setpoint = None
+                if "T0" in temps and temps["T0"][1]: setpoint = float(temps["T0"][1])
+                elif temps["T"][1]: setpoint = float(temps["T"][1])
+                if setpoint is not None:
+                    if self.display_graph: wx.CallAfter(self.graph.SetExtruder0TargetTemperature, setpoint)
+                    if self.display_gauges: wx.CallAfter(self.hottgauge.SetTarget, setpoint)
             if "T1" in temps:
                 hotend_temp = float(temps["T1"][0])
                 if self.display_graph: wx.CallAfter(self.graph.SetExtruder1Temperature, hotend_temp)
-            bed_temp = float(temps["B"][0]) if "B" in temps else -1.0
+                setpoint = temps["T1"][1]
+                if setpoint and self.display_graph:
+                    wx.CallAfter(self.graph.SetExtruder1TargetTemperature, float(setpoint))
+            bed_temp = float(temps["B"][0]) if "B" in temps else None
+            if bed_temp is not None:
                 if self.display_graph: wx.CallAfter(self.graph.SetBedTemperature, bed_temp)
                 if self.display_gauges: wx.CallAfter(self.bedtgauge.SetValue, bed_temp)
+                setpoint = temps["B"][1]
+                if setpoint:
+                    setpoint = float(setpoint)
+                    if self.display_graph: wx.CallAfter(self.graph.SetBedTargetTemperature, setpoint)
+                    if self.display_gauges: wx.CallAfter(self.bedtgauge.SetTarget, setpoint)
+                    
         except:
             traceback.print_exc()
 
@@ -1469,6 +1486,11 @@ class PronterWindow(MainWindow, pronsole.pronsole):
         threading.Thread(target = self.skein_func).start()
         threading.Thread(target = self.skein_monitor).start()
 
+    def cmdline_filename_callback(self, filename):
+        # Do nothing when processing a filename from command line, as we'll
+        # handle it when everything has been prepared
+        self.filename = filename
+
     def do_load(self,l):
         if hasattr(self, 'skeining'):
             self.loadfile(None, l)