Renamed Ex1 to Ex0 and Ex2 to Ex1 to better match what is said on RAMPS for instance.

Changed order to draw the target line first, and then the actual line so this line is shown above the target line.
Graying out graph when it's offline.

graph.py

@@ -32,10 +32,10 @@ class Graph(BufferedCanvas):
 
         self.SetSize(wx.Size(170, 100))
 
+        self.extruder0temps       = [0]
+        self.extruder0targettemps = [0]
         self.extruder1temps       = [0]
         self.extruder1targettemps = [0]
-        self.extruder2temps       = [0]
-        self.extruder2targettemps = [0]
         self.bedtemps             = [0]
         self.bedtargettemps       = [0]
 
@@ -45,7 +45,7 @@ class Graph(BufferedCanvas):
         self.maxyvalue  = 250
         self.ybars      = 5
         self.xbars      = 6 # One bar per 10 second
-        self.xsteps     = 60 # Covering One minute in the graph
+        self.xsteps     = 60 # Covering 1 minute in the graph
 
         self.y_offset   = 1 # This is to show the line even when value is 0 and maxyvalue
 
@@ -70,10 +70,10 @@ class Graph(BufferedCanvas):
     def updateTemperatures(self, event):
         self.AddBedTemperature(self.bedtemps[-1])
         self.AddBedTargetTemperature(self.bedtargettemps[-1])
-        self.AddExtruder1Temperature(self.extruder1temps[-1])
-        self.AddExtruder1TargetTemperature(self.extruder1targettemps[-1])
-        #self.AddExtruder2Temperature(self.extruder2temps[-1])
-        #self.AddExtruder2TargetTemperature(self.extruder2targettemps[-1])
+        self.AddExtruder0Temperature(self.extruder0temps[-1])
+        self.AddExtruder0TargetTemperature(self.extruder0targettemps[-1])
+        #self.AddExtruder1Temperature(self.extruder1temps[-1])
+        #self.AddExtruder1TargetTemperature(self.extruder1targettemps[-1])
         self.Refresh()
 
 
@@ -131,7 +131,11 @@ class Graph(BufferedCanvas):
         #dc.SetPen(wx.Pen(wx.Colour(255,0,0,0), 1))
 
     def drawtemperature(self, dc, gc, temperature_list, text, text_xoffset, r, g, b, a):
+        if self.timer.IsRunning() == False:
+            dc.SetPen(wx.Pen(wx.Colour(128,128,128,128), 1))
+        else:
             dc.SetPen(wx.Pen(wx.Colour(r,g,b,a), 1))
+
         x_add = float(self.width)/self.xsteps
         x_pos = float(0.0)
         lastxvalue = float(0.0)
@@ -140,6 +144,7 @@ class Graph(BufferedCanvas):
             y_pos = int((float(self.height-self.y_offset)/self.maxyvalue)*temperature) + self.y_offset
             if (x_pos > 0.0): # One need 2 points to draw a line.
                 dc.DrawLine(lastxvalue,self.height-self._lastyvalue, x_pos, self.height-y_pos)
+
             lastxvalue = x_pos
             x_pos = float(x_pos) + x_add
             self._lastyvalue = y_pos
@@ -147,7 +152,11 @@ class Graph(BufferedCanvas):
         if len(text) > 0:
             font = wx.Font(8, wx.DEFAULT, wx.NORMAL, wx.BOLD)
             #font = wx.Font(8, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
+            if self.timer.IsRunning() == False:
+                gc.SetFont(font, wx.Colour(128,128,128))
+            else:
                 gc.SetFont(font, wx.Colour(r,g,b))
+
             #gc.DrawText(text, self.width - (font.GetPointSize() * ((len(text) * text_xoffset + 1))), self.height - self._lastyvalue - (font.GetPointSize() / 2))
             gc.DrawText(text, x_pos - x_add - (font.GetPointSize() * ((len(text) * text_xoffset + 1))), self.height - self._lastyvalue - (font.GetPointSize() / 2))
             #gc.DrawText(text, self.width - (font.GetPixelSize().GetWidth() * ((len(text) * text_xoffset + 1) + 1)), self.height - self._lastyvalue - (font.GetPointSize() / 2))
@@ -160,18 +169,18 @@ class Graph(BufferedCanvas):
         self.drawtemperature(dc, gc, self.bedtargettemps, "Bed Target",2, 255,120,0, 128)
 
 
-    def drawextruder1temp(self, dc, gc):
-        self.drawtemperature(dc, gc, self.extruder1temps, "Ex1",1, 0,155,255, 128)
+    def drawextruder0temp(self, dc, gc):
+        self.drawtemperature(dc, gc, self.extruder0temps, "Ex0",1, 0,155,255, 128)
 
-    def drawextruder1targettemp(self, dc, gc):
-        self.drawtemperature(dc, gc, self.extruder1targettemps, "Ex1 Target",2, 0,5,255, 128)
+    def drawextruder0targettemp(self, dc, gc):
+        self.drawtemperature(dc, gc, self.extruder0targettemps, "Ex0 Target",2, 0,5,255, 128)
 
 
-    def drawextruder2temp(self, dc, gc):
-        self.drawtemperature(dc, gc, self.extruder2temps, "Ex2",3, 55,55,0, 128)
+    def drawextruder1temp(self, dc, gc):
+        self.drawtemperature(dc, gc, self.extruder1temps, "Ex1",3, 55,55,0, 128)
 
-    def drawextruder2targettemp(self, dc, gc):
-        self.drawtemperature(dc, gc, self.extruder2targettemps, "Ex2 Target",2, 55,55,0, 128)
+    def drawextruder1targettemp(self, dc, gc):
+        self.drawtemperature(dc, gc, self.extruder1targettemps, "Ex1 Target",2, 55,55,0, 128)
 
 
     def SetBedTemperature(self, value):
@@ -194,6 +203,26 @@ class Graph(BufferedCanvas):
             self.bedtargettemps.pop(0)
 
 
+    def SetExtruder0Temperature(self, value):
+        self.extruder0temps.pop()
+        self.extruder0temps.append(value)
+
+    def AddExtruder0Temperature(self, value):
+        self.extruder0temps.append(value)
+        if (len(self.extruder0temps)-1) * float(self.width)/self.xsteps > self.width:
+            self.extruder0temps.pop(0)
+
+
+    def SetExtruder0TargetTemperature(self, value):
+        self.extruder0targettemps.pop()
+        self.extruder0targettemps.append(value)
+
+    def AddExtruder0TargetTemperature(self, value):
+        self.extruder0targettemps.append(value)
+        if (len(self.extruder0targettemps)-1) * float(self.width)/self.xsteps > self.width:
+            self.extruder0targettemps.pop(0)
+
+
     def SetExtruder1Temperature(self, value):
         self.extruder1temps.pop()
         self.extruder1temps.append(value)
@@ -214,26 +243,6 @@ class Graph(BufferedCanvas):
             self.extruder1targettemps.pop(0)
 
 
-    def SetExtruder2Temperature(self, value):
-        self.extruder2temps.pop()
-        self.extruder2temps.append(value)
-
-    def AddExtruder2Temperature(self, value):
-        self.extruder2temps.append(value)
-        if (len(self.extruder2temps)-1) * float(self.width)/self.xsteps > self.width:
-            self.extruder2temps.pop(0)
-
-
-    def SetExtruder2TargetTemperature(self, value):
-        self.extruder2targettemps.pop(0)
-        self.extruder2targettemps.append(value)
-
-    def AddExtruder2TargetTemperature(self, value):
-        self.extruder2targettemps.append(value)
-        if (len(self.extruder2targettemps)-1) * float(self.width)/self.xsteps > self.width:
-            self.extruder2targettemps.pop(0)
-
-
     def StartPlotting(self, time):
         self.Refresh()
         self.timer.Start(time)
@@ -248,11 +257,11 @@ class Graph(BufferedCanvas):
         self.width = w
         self.height = h
         self.drawgrid(dc, gc)
-        self.drawbedtemp(dc, gc)
         self.drawbedtargettemp(dc, gc)
-        self.drawextruder1temp(dc, gc)
+        self.drawbedtemp(dc, gc)
+        self.drawextruder0targettemp(dc, gc)
+        self.drawextruder0temp(dc, gc)
         self.drawextruder1targettemp(dc, gc)
-        self.drawextruder2temp(dc, gc)
-        self.drawextruder2targettemp(dc, gc)
+        self.drawextruder1temp(dc, gc)
 
 

pronterface.py

@@ -204,7 +204,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                 try:
                     temp=float(line.split("S")[1].split("*")[0])
                     self.hottgauge.SetTarget(temp)
-                    self.graph.SetExtruder1TargetTemperature(temp)
+                    self.graph.SetExtruder0TargetTemperature(temp)
                 except:
                     pass
             try:
@@ -254,7 +254,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                     print _("Setting hotend temperature to %f degrees Celsius.") % f
                     self.hsetpoint=f
                     self.hottgauge.SetTarget(int(f))
-                    self.graph.SetExtruder1TargetTemperature(int(f))
+                    self.graph.SetExtruder0TargetTemperature(int(f))
                     if f>0:
                         wx.CallAfter(self.htemp.SetValue,l)
                         self.set("last_temperature",str(f))
@@ -1202,7 +1202,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                 wx.CallAfter(self.tempdisp.SetLabel,self.tempreport.strip().replace("ok ",""))
                 try:
                     self.hottgauge.SetValue(float(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
-                    self.graph.SetExtruder1Temperature(float(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
+                    self.graph.SetExtruder0Temperature(float(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
                     self.bedtgauge.SetValue(float(filter(lambda x:x.startswith("B:"),self.tempreport.split())[0].split(":")[1]))
                     self.graph.SetBedTemperature(float(filter(lambda x:x.startswith("B:"),self.tempreport.split())[0].split(":")[1]))
                 except:
@@ -1266,7 +1266,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
             wx.CallAfter(self.tempdisp.SetLabel,self.tempreport.strip().replace("ok ",""))
             try:
                 self.hottgauge.SetValue(float(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
-                self.graph.SetExtruder1Temperature(float(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
+                self.graph.SetExtruder0Temperature(float(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
                 self.graph.SetBedTemperature(float(filter(lambda x:x.startswith("B:"),self.tempreport.split())[0].split(":")[1]))
             except:
                 pass