/** * MK & MK4due 3D Printer Firmware * * Based on Marlin, Sprinter and grbl * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2013 - 2016 Alberto Cotronei @MagoKimbra * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * */ /** * Basque-Euskera * * LCD Menu Messages * See also documentation/LCDLanguageFont.md * */ #ifndef LANGUAGE_EU_H #define LANGUAGE_EU_H #define MAPPER_NON // For direct asci codes #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. #define WELCOME_MSG MACHINE_NAME " prest." #define MSG_SD "Txartela" #define MSG_SD_INSERTED MSG_SD " sartuta" #define MSG_SD_REMOVED MSG_SD " kenduta" #define MSG_MAIN "Menu nagusia" #define MSG_AUTOSTART "Auto hasiera" #define MSG_DISABLE_STEPPERS "Itzali motoreak" #define MSG_AUTO_HOME "Hasierara joan" #define MSG_MBL_SETTING "Manual Bed Leveling" #define MSG_MBL_BUTTON " Press the button " #define MSG_MBL_INTRO " Leveling bed... " #define MSG_MBL_1 " Adjust first point " #define MSG_MBL_2 " Adjust second point" #define MSG_MBL_3 " Adjust third point " #define MSG_MBL_4 " Adjust fourth point" #define MSG_MBL_5 " Is it ok? " #define MSG_MBL_6 " BED leveled! " #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_ORIGIN "Hasiera ipini" #define MSG_ONFOR "On x:" #define MSG_PWRCONSUMED "P.er:" #define MSG_FILCONSUMED "F:" #define MSG_PREHEAT "Berotu" #define MSG_PREHEAT_PLA MSG_PREHEAT " PLA" #define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " Guztia" #define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Ohea" #define MSG_PREHEAT_PLA_SETTINGS "PLA Konfig" #define MSG_PREHEAT_ABS MSG_PREHEAT " ABS" #define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Guztia" #define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Ohea" #define MSG_PREHEAT_ABS_SETTINGS "ABS Konfig" #define MSG_PREHEAT_GUM MSG_PREHEAT " GUM" #define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " Guztia" #define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Ohea" #define MSG_PREHEAT_GUM_SETTINGS "GUM Konfig" #define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament" #define MSG_COOLDOWN "Hoztu" #define MSG_SWITCH_PS_ON "Energia piztu" #define MSG_SWITCH_PS_OFF "Energia itzali" #define MSG_EXTRUDE "Estruitu" #define MSG_RETRACT "Atzera eragin" #define MSG_PURGE "Purge" #define MSG_LEVEL_BED "Level bed" #define MSG_SPEED "Abiadura" #define MSG_NOZZLE "Pita" #define MSG_BED "Ohea" #define MSG_FAN_SPEED "Haizagailua" #define MSG_FLOW "Fluxua" #define MSG_CONTROL "Kontrola" #define MSG_STATS "Statistics" #define MSG_FIX_LOSE_STEPS "Fix axis steps" #define MSG_MIN LCD_STR_THERMOMETER " Min" #define MSG_MAX LCD_STR_THERMOMETER " Max" #define MSG_FACTOR LCD_STR_THERMOMETER " Fact" #define MSG_IDLEOOZING "Anti oozing" #define MSG_AUTOTEMP "Auto tenperatura" #define MSG_ON "ON " #define MSG_OFF "OFF" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_H1 " H1" #define MSG_H2 " H2" #define MSG_H3 " H3" #define MSG_ACC "Azelerazioa" #define MSG_VXY_JERK "Vxy-astindua" #define MSG_VZ_JERK "Vz-astindua" #define MSG_VE_JERK "Ve-astindua" #define MSG_VMAX "Vmax " #define MSG_X "X" #define MSG_Y "Y" #define MSG_Z "Z" #define MSG_E "E" #define MSG_MOVE "Mugitu" #define MSG_MOVE_AXIS MSG_MOVE " ardatzak" #define MSG_MOVE_X MSG_MOVE " " MSG_X #define MSG_MOVE_Y MSG_MOVE " " MSG_Y #define MSG_MOVE_Z MSG_MOVE " " MSG_Z #define MSG_MOVE_01MM MSG_MOVE " 0.1mm" #define MSG_MOVE_1MM MSG_MOVE " 1mm" #define MSG_MOVE_10MM MSG_MOVE " 10mm" #define MSG_MOVE_E "Estrusorea" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retrakt" #define MSG_A_TRAVEL "A-travel" #define MSG_XSTEPS MSG_X " pausoak/mm" #define MSG_YSTEPS MSG_Y " pausoak/mm" #define MSG_ZSTEPS MSG_Z " pausoak/mm" #define MSG_E0STEPS MSG_E "0 pausoak/mm" #define MSG_E1STEPS MSG_E "1 pausoak/mm" #define MSG_E2STEPS MSG_E "2 pausoak/mm" #define MSG_E3STEPS MSG_E "3 pausoak/mm" #define MSG_TEMPERATURE "Tenperatura" #define MSG_MOTION "Mugimendua" #define MSG_FILAMENT "Filament" #define MSG_VOLUMETRIC_ENABLED MSG_E " in mm3" #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_CONTRAST "LCD kontrastea" #define MSG_STORE_EPROM "Gorde memoria" #define MSG_LOAD_EPROM "Kargatu memoria" #define MSG_RESTORE_FAILSAFE "Larri. berriz." #define MSG_REFRESH "Berriz kargatu" #define MSG_WATCH "Pantaila info" #define MSG_PREPARE "Prestatu" #define MSG_TUNE "Doitu" #define MSG_PAUSE_PRINT "Pausatu inprimak." #define MSG_RESUME_PRINT "Jarraitu inprima." #define MSG_STOP_PRINT "Gelditu inprima." #define MSG_CARD_MENU "SD-tik inprimatu" #define MSG_NO_CARD "Ez dago txartelik" #define MSG_DWELL "Lo egin..." #define MSG_USERWAIT "Aginduak zain..." #define MSG_RESUMING "Jarraitzen inpri." #define MSG_PRINT_ABORTED "Print aborted" #define MSG_NO_MOVE "Mugimendu gabe" #define MSG_KILLED "LARRIALDI GELDIA" #define MSG_STOPPED "GELDITUTA. " #define MSG_CONTROL_RETRACT "Atzera egin mm" #define MSG_CONTROL_RETRACT_SWAP "Swap Atzera egin mm" #define MSG_CONTROL_RETRACTF "Atzera egin V" #define MSG_CONTROL_RETRACT_ZLIFT "Igo mm" #define MSG_CONTROL_RETRACT_RECOVER "Atzera egin +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap Atzera egin +mm" #define MSG_CONTROL_RETRACT_RECOVERF "Atzera egin V" #define MSG_AUTORETRACT "Atzera egin" #define MSG_FILAMENTCHANGE "Aldatu filament." #define MSG_INIT_SDCARD "Hasieratu txartela" #define MSG_CNG_SDCARD "Aldatu txartela" #define MSG_ZPROBE_OUT "Z ohe hasiera" #define MSG_POSITION_UNKNOWN "Posizio ezezaguna" #define MSG_ZPROBE_ZOFFSET "Z konpentsatu" #define MSG_BABYSTEP "Babystep" #define MSG_BABYSTEP_X MSG_BABYSTEP " " MSG_X #define MSG_BABYSTEP_Y MSG_BABYSTEP " " MSG_Y #define MSG_BABYSTEP_Z MSG_BABYSTEP " " MSG_Z #define MSG_ENDSTOP_ABORT "Endstop deuseztat" #define MSG_HEATING_FAILED_LCD "Heating failed" #define MSG_ERR_REDUNDANT_TEMP "REDUNDANT TEMP ERROR" #define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY" #define MSG_HOTEND_AD595 "HOTEND AD595 Offset & Gain" #define MSG_ERR_MAXTEMP "MAXTEMP ERROR" #define MSG_ERR_MINTEMP "MINTEMP ERROR" #define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR" #define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR" #define MSG_END_DAY "days" #define MSG_END_HOUR "hours" #define MSG_END_MINUTE "minutes" #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_BABYSTEPPING "Babystepping" #define MSG_BABYSTEPPING_X MSG_BABYSTEPPING " " MSG_X #define MSG_BABYSTEPPING_Y MSG_BABYSTEPPING " " MSG_Y #define MSG_BABYSTEPPING_Z MSG_BABYSTEPPING " " MSG_Z #define MSG_ENDSTOP_XS MSG_X #define MSG_ENDSTOP_YS MSG_Y #define MSG_ENDSTOP_ZS MSG_Z #define MSG_ENDSTOP_ZPS MSG_Z "P" #define MSG_ENDSTOP_ES MSG_E // Calibrate Delta #if MECH(DELTA) #define MSG_DELTA_CALIBRATE "Delta Calibration" #define MSG_DELTA_CALIBRATE_X "Calibrate " MSG_X #define MSG_DELTA_CALIBRATE_Y "Calibrate " MSG_Y #define MSG_DELTA_CALIBRATE_Z "Calibrate " MSG_Z #define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" #endif // DELTA // Scara #if MECH(SCARA) #define MSG_SCALE "Scale" #define MSG_XSCALE MSG_X " " MSG_SCALE #define MSG_YSCALE MSG_Y " " MSG_SCALE #endif #define MSG_HEATING "Heating..." #define MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating." #define MSG_BED_DONE "Bed done." // Extra #define MSG_LASER "Laser Preset" #define MSG_CONFIG "Configuration" #define MSG_E_BOWDEN_LENGTH MSG_EXTRUDE " " STRINGIFY(BOWDEN_LENGTH) "mm" #define MSG_R_BOWDEN_LENGTH MSG_RETRACT " " STRINGIFY(BOWDEN_LENGTH) "mm" #define MSG_PURGE_XMM MSG_PURGE " " STRINGIFY(LCD_PURGE_LENGTH) "mm" #define MSG_RETRACT_XMM MSG_RETRACT " " STRINGIFY(LCD_RETRACT_LENGTH) "mm" #define MSG_SAVED_POS "Saved position" #define MSG_RESTORING_POS "Restoring position" #define MSG_INVALID_POS_SLOT "Invalid slot, total slots: " // Rfid module #if ENABLED(RFID_MODULE) #define MSG_RFID_SPOOL "Spool on E" #define MSG_RFID_BRAND "Brand: " #define MSG_RFID_COLOR "Color: " #define MSG_RFID_SIZE "Size: " #define MSG_RFID_TEMPERATURE "Temperature: " #define MSG_RFID_DENSITY "Density: " #define MSG_RFID_SPOOL_LENGHT "Spool Lenght: " #endif // Firmware Test #if ENABLED(FIRMWARE_TEST) #define MSG_FWTEST_YES "Put the Y command to go next" #define MSG_FWTEST_NO "Put the N command to go next" #define MSG_FWTEST_YES_NO "Put the Y or N command to go next" #define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection" #define MSG_FWTEST_PRESS "Press and hold the endstop " #define MSG_FWTEST_INVERT "Reverse value of " #define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?" #define MSG_FWTEST_YAXIS "Has the nozzle moved forward?" #define MSG_FWTEST_ZAXIS "Has the nozzle moved up?" #define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop" #define MSG_FWTEST_02 "Do you want check ENDSTOP?" #define MSG_FWTEST_03 "Start check ENDSTOP" #define MSG_FWTEST_04 "Start check MOTOR" #define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!" #define MSG_FWTEST_END "Finish Test. Disable FIRMWARE_TEST and recompile." #define MSG_FWTEST_INTO "into " #define MSG_FWTEST_ERROR "ERROR" #define MSG_FWTEST_OK "OK" #define MSG_FWTEST_NDEF "not defined" #endif // FIRMWARE_TEST #endif // LANGUAGE_EU_H