/** * Catalan * * LCD Menu Messages * See also documentation/LCDLanguageFont.md * */ #ifndef LANGUAGE_CA_H #define LANGUAGE_CA_H #define MAPPER_C2C3 // because of "รณ" #define DISPLAY_CHARSET_ISO10646_1 #define WELCOME_MSG MACHINE_NAME " preparada." #define MSG_SD "SD" #define MSG_SD_INSERTED MSG_SD " detectada." #define MSG_SD_REMOVED MSG_SD " expulsada." #define MSG_MAIN "Menu principal" #define MSG_AUTOSTART "Inici automatic" #define MSG_DISABLE_STEPPERS "Apagar motors" #define MSG_AUTO_HOME "Home global" #define MSG_MBL_SETTING "Manual Bed Leveling" #define MSG_MBL_BUTTON " Press the button " #define MSG_MBL_INTRO " Leveling bed... " #define MSG_MBL_1 " Adjust first point " #define MSG_MBL_2 " Adjust second point" #define MSG_MBL_3 " Adjust third point " #define MSG_MBL_4 " Adjust fourth point" #define MSG_MBL_5 " Is it ok? " #define MSG_MBL_6 " BED leveled! " #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_ORIGIN "Establir origen" #define MSG_ONFOR "On x:" #define MSG_PWRCONSUMED "P.er:" #define MSG_FILCONSUMED "F:" #define MSG_PREHEAT "Preesc." #define MSG_PREHEAT_PLA MSG_PREHEAT " PLA" #define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All" #define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " llit" #define MSG_PREHEAT_PLA_SETTINGS "PLA Configuracio" #define MSG_PREHEAT_ABS MSG_PREHEAT " ABS" #define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All" #define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " llit" #define MSG_PREHEAT_ABS_SETTINGS "ABS Configuracio" #define MSG_PREHEAT_GUM MSG_PREHEAT " GUM" #define MSG_PREHEAT_GUM_ALL MSG_PREHEAT_GUM " All" #define MSG_PREHEAT_GUM_BEDONLY MSG_PREHEAT_GUM " Bed" #define MSG_PREHEAT_GUM_SETTINGS "GUM Configuracio" #define MSG_TOO_COLD_FOR_FILAMENTCHANGE "Hotend too cold to change filament" #define MSG_COOLDOWN "Refredar" #define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_OFF "Switch power off" #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Refredar" #define MSG_PURGE "Purge" #define MSG_LEVEL_BED "Level bed" #define MSG_SPEED "Velocitat" #define MSG_NOZZLE "Nozzle" #define MSG_BED "Llit" #define MSG_FAN_SPEED "Vel. Ventilador" #define MSG_FLOW "Fluxe" #define MSG_CONTROL "Control" #define MSG_STATS "Statistics" #define MSG_FIX_LOSE_STEPS "Fix axis steps" #define MSG_MIN LCD_STR_THERMOMETER " Min" #define MSG_MAX LCD_STR_THERMOMETER " Max" #define MSG_FACTOR LCD_STR_THERMOMETER " Fact" #define MSG_IDLEOOZING "Anti oozing" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "ON " #define MSG_OFF "OFF" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_H1 " H1" #define MSG_H2 " H2" #define MSG_H3 " H3" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "X" #define MSG_Y "Y" #define MSG_Z "Z" #define MSG_E "E" #define MSG_MOVE "Move" #define MSG_MOVE_AXIS MSG_MOVE " eixos" #define MSG_MOVE_X MSG_MOVE " " MSG_X #define MSG_MOVE_Y MSG_MOVE " " MSG_Y #define MSG_MOVE_Z MSG_MOVE " " MSG_Z #define MSG_MOVE_01MM MSG_MOVE " 0.1mm" #define MSG_MOVE_1MM MSG_MOVE " 1mm" #define MSG_MOVE_10MM MSG_MOVE " 10mm" #define MSG_MOVE_E "Extrusor" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_A_TRAVEL "A-travel" #define MSG_XSTEPS MSG_X " passos/mm" #define MSG_YSTEPS MSG_Y " passos/mm" #define MSG_ZSTEPS MSG_Z " passos/mm" #define MSG_E0STEPS MSG_E "0 passos/mm" #define MSG_E1STEPS MSG_E "1 passos/mm" #define MSG_E2STEPS MSG_E "2 passos/mm" #define MSG_E3STEPS MSG_E "3 passos/mm" #define MSG_TEMPERATURE "Temperatura" #define MSG_MOTION "Moviment" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED MSG_E " in mm3" #define MSG_FILAMENT_SIZE_EXTRUDER "Fil. Dia." #define MSG_CONTRAST "Contrast de LCD" #define MSG_STORE_EPROM "Desar a memoria" #define MSG_LOAD_EPROM "Carregar de mem." #define MSG_RESTORE_FAILSAFE "Rest. emergencia" #define MSG_REFRESH "Refrescar" #define MSG_WATCH "Pantalla Info." #define MSG_PREPARE "Preparar" #define MSG_TUNE "Calibrar" #define MSG_PAUSE_PRINT "Pausa imp." #define MSG_RESUME_PRINT "Reprendre imp." #define MSG_STOP_PRINT "Parar inp." #define MSG_CARD_MENU "Imprimir de " MSG_SD #define MSG_NO_CARD "Sense targeta " MSG_SD #define MSG_DWELL "Repos..." #define MSG_USERWAIT "Esperant usuari.." #define MSG_RESUMING "Reprenent imp." #define MSG_PRINT_ABORTED "Print aborted" #define MSG_NO_MOVE "Sense moviment." #define MSG_KILLED "PARADA DE EMERG. " #define MSG_STOPPED "ATURAT. " #define MSG_CONTROL_RETRACT "Retreure mm" #define MSG_CONTROL_RETRACT_SWAP "Swap Re. mm" #define MSG_CONTROL_RETRACTF "Retreure F" #define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Canviar filament" #define MSG_INIT_SDCARD "Iniciant " MSG_SD #define MSG_CNG_SDCARD "Canviar " MSG_SD #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y abans Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP "Babystep" #define MSG_BABYSTEP_X MSG_BABYSTEP " " MSG_X #define MSG_BABYSTEP_Y MSG_BABYSTEP " " MSG_Y #define MSG_BABYSTEP_Z MSG_BABYSTEP " " MSG_Z #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_HEATING_FAILED_LCD "Heating failed" #define MSG_ERR_REDUNDANT_TEMP "REDUNDANT TEMP ERROR" #define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY" #define MSG_HOTEND_AD595 "HOTEND AD595 Offset & Gain" #define MSG_ERR_MAXTEMP "MAXTEMP ERROR" #define MSG_ERR_MINTEMP "MINTEMP ERROR" #define MSG_ERR_MAXTEMP_BED "MAXTEMP BED ERROR" #define MSG_ERR_MINTEMP_BED "MINTEMP BED ERROR" #define MSG_END_DAY "days" #define MSG_END_HOUR "hours" #define MSG_END_MINUTE "minutes" #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_BABYSTEPPING "Babystepping" #define MSG_BABYSTEPPING_X MSG_BABYSTEPPING " " MSG_X #define MSG_BABYSTEPPING_Y MSG_BABYSTEPPING " " MSG_Y #define MSG_BABYSTEPPING_Z MSG_BABYSTEPPING " " MSG_Z #define MSG_ENDSTOP_XS MSG_X #define MSG_ENDSTOP_YS MSG_Y #define MSG_ENDSTOP_ZS MSG_Z #define MSG_ENDSTOP_ZPS MSG_Z "P" #define MSG_ENDSTOP_ES MSG_E // Calibrate Delta #if MECH(DELTA) #define MSG_DELTA_CALIBRATE "Delta Calibration" #define MSG_DELTA_CALIBRATE_X "Calibrate " MSG_X #define MSG_DELTA_CALIBRATE_Y "Calibrate " MSG_Y #define MSG_DELTA_CALIBRATE_Z "Calibrate " MSG_Z #define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" #endif // DELTA // Scara #if MECH(SCARA) #define MSG_SCALE "Scale" #define MSG_XSCALE MSG_X " " MSG_SCALE #define MSG_YSCALE MSG_Y " " MSG_SCALE #endif #define MSG_HEATING "Heating..." #define MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating." #define MSG_BED_DONE "Bed done." // Extra #define MSG_LASER "Laser Preset" #define MSG_CONFIG "Configuration" #define MSG_E_BOWDEN_LENGTH MSG_EXTRUDE " " STRINGIFY(BOWDEN_LENGTH) "mm" #define MSG_R_BOWDEN_LENGTH MSG_RETRACT " " STRINGIFY(BOWDEN_LENGTH) "mm" #define MSG_PURGE_XMM MSG_PURGE " " STRINGIFY(LCD_PURGE_LENGTH) "mm" #define MSG_RETRACT_XMM MSG_RETRACT " " STRINGIFY(LCD_RETRACT_LENGTH) "mm" #define MSG_SAVED_POS "Saved position" #define MSG_RESTORING_POS "Restoring position" #define MSG_INVALID_POS_SLOT "Invalid slot, total slots: " // Rfid module #if ENABLED(RFID_MODULE) #define MSG_RFID_SPOOL "Spool on E" #define MSG_RFID_BRAND "Brand: " #define MSG_RFID_COLOR "Color: " #define MSG_RFID_SIZE "Size: " #define MSG_RFID_TEMPERATURE "Temperature: " #define MSG_RFID_DENSITY "Density: " #define MSG_RFID_SPOOL_LENGHT "Spool Lenght: " #endif // Firmware Test #if ENABLED(FIRMWARE_TEST) #define MSG_FWTEST_YES "Put the Y command to go next" #define MSG_FWTEST_NO "Put the N command to go next" #define MSG_FWTEST_YES_NO "Put the Y or N command to go next" #define MSG_FWTEST_ENDSTOP_ERR "ENDSTOP ERROR! Check wire and connection" #define MSG_FWTEST_PRESS "Press and hold the endstop " #define MSG_FWTEST_INVERT "Reverse value of " #define MSG_FWTEST_XAXIS "Has the nozzle moved to the right?" #define MSG_FWTEST_YAXIS "Has the nozzle moved forward?" #define MSG_FWTEST_ZAXIS "Has the nozzle moved up?" #define MSG_FWTEST_01 "Manually move the axes X, Y and Z away from the endstop" #define MSG_FWTEST_02 "Do you want check ENDSTOP?" #define MSG_FWTEST_03 "Start check ENDSTOP" #define MSG_FWTEST_04 "Start check MOTOR" #define MSG_FWTEST_ATTENTION "ATTENTION! Check that the three axes are more than 5 mm from the endstop!" #define MSG_FWTEST_END "Finish Test. Disable FIRMWARE_TEST and recompile." #define MSG_FWTEST_INTO "into " #define MSG_FWTEST_ERROR "ERROR" #define MSG_FWTEST_OK "OK" #define MSG_FWTEST_NDEF "not defined" #endif // FIRMWARE_TEST #endif // LANGUAGE_CA_H