/**************************************************************************************** * 70 * MegaTronics ****************************************************************************************/ #define KNOWN_BOARD 1 #ifndef __AVR_ATmega2560__ #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. #endif #define LARGE_FLASH true #define ORIG_X_STEP_PIN 26 #define ORIG_X_DIR_PIN 28 #define ORIG_X_ENABLE_PIN 24 #define ORIG_X_MIN_PIN 41 #define ORIG_X_MAX_PIN 37 #define ORIG_Y_STEP_PIN 60 // A6 #define ORIG_Y_DIR_PIN 61 // A7 #define ORIG_Y_ENABLE_PIN 22 #define ORIG_Y_MIN_PIN 14 #define ORIG_Y_MAX_PIN 15 #define ORIG_Z_STEP_PIN 54 // A0 #define ORIG_Z_DIR_PIN 55 // A1 #define ORIG_Z_ENABLE_PIN 56 // A2 #define ORIG_Z_MIN_PIN 18 #define ORIG_Z_MAX_PIN 19 #define ORIG_E0_STEP_PIN 31 #define ORIG_E0_DIR_PIN 32 #define ORIG_E0_ENABLE_PIN 38 #define ORIG_E1_STEP_PIN 34 #define ORIG_E1_DIR_PIN 36 #define ORIG_E1_ENABLE_PIN 30 #define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define ORIG_FAN_PIN 7 // IO pin. Buffer needed #define ORIG_PS_ON_PIN 12 #define KILL_PIN -1 #define ORIG_HEATER_0_PIN 9 // EXTRUDER 1 #define ORIG_HEATER_1_PIN 8 // EXTRUDER 2 (FAN On Sprinter) #define ORIG_HEATER_2_PIN -1 #if TEMP_SENSOR_0 == -1 #define ORIG_TEMP_0_PIN 8 // ANALOG NUMBERING #else #define ORIG_TEMP_0_PIN 13 // ANALOG NUMBERING #endif #define ORIG_TEMP_1_PIN 15 // ANALOG NUMBERING #define ORIG_TEMP_2_PIN -1 // ANALOG NUMBERING #define ORIG_HEATER_BED_PIN 10 // BED #define ORIG_TEMP_BED_PIN 14 // ANALOG NUMBERING #define ORIG_BEEPER_PIN 33 // Beeper on AUX-4 #if ENABLED(ULTRA_LCD) #if ENABLED(NEWPANEL) //arduino pin which triggers an piezzo beeper #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 #define LCD_PINS_D4 23 #define LCD_PINS_D5 25 #define LCD_PINS_D6 27 #define LCD_PINS_D7 29 //buttons are directly attached using AUX-2 #define BTN_EN1 59 #define BTN_EN2 64 #define BTN_ENC 43 //the click #define BLEN_C 2 #define BLEN_B 1 #define BLEN_A 0 #define SD_DETECT_PIN -1 // Ramps does not use this port #endif //NEWPANEL #endif //ULTRA_LCD