/**
 * Aragonese
 *
 * LCD Menu Messages
 * Please note these are limited to 17 characters!
 *
 */
#ifndef LANGUAGE_AN_H
#define LANGUAGE_AN_H

#define WELCOME_MSG                         MACHINE_NAME " parada."
#define MSG_SD_INSERTED                     "Tarcheta colocada"
#define MSG_SD_REMOVED                      "Tarcheta retirada"
#define MSG_MAIN                            "Menu prencipal"
#define MSG_AUTOSTART                       "Autostart"
#define MSG_DISABLE_STEPPERS                "Amortar motors"
#define MSG_AUTO_HOME                       "Levar a l'orichen"
#define MSG_BED_SETTING                     "Bed Setting"
#define MSG_SET_HOME_OFFSETS                "Set home offsets"
#define MSG_SET_ORIGIN                      "Establir zero"
#define MSG_PREHEAT_PLA                     "Precalentar PLA"
#define MSG_PREHEAT_PLA_ALL                 "Precalentar PLA a"
#define MSG_PREHEAT_PLA_BEDONLY             "Prec. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS            "Achustar tem. PLA"
#define MSG_PREHEAT_ABS                     "Precalentar ABS"
#define MSG_PREHEAT_ABS_ALL                 "Precalentar ABS a"
#define MSG_PREHEAT_ABS_BEDONLY             "Prec. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS            "Achustar tem. ABS"
#define MSG_PREHEAT_GUM                     "Preheat GUM"
#define MSG_PREHEAT_GUM_ALL                 "Preheat GUM All"
#define MSG_PREHEAT_GUM_BEDONLY             "Preheat GUM Bed"
#define MSG_PREHEAT_GUM_SETTINGS            "Preheat GUM conf"
#define MSG_COOLDOWN                        "Enfriar"
#define MSG_SWITCH_PS_ON                    "Enchegar Fuent"
#define MSG_SWITCH_PS_OFF                   "Desenchegar Fuent"
#define MSG_EXTRUDE                         "Extruir"
#define MSG_RETRACT                         "Retraer"
#define MSG_MOVE_AXIS                       "Mover Eixes"
#define MSG_MOVE_X                          "Move X"
#define MSG_MOVE_Y                          "Move Y"
#define MSG_MOVE_Z                          "Move Z"
#define MSG_MOVE_E                          "Extruder"
#define MSG_MOVE_01MM                       "Move 0.1mm"
#define MSG_MOVE_1MM                        "Move 1mm"
#define MSG_MOVE_10MM                       "Move 10mm"
#define MSG_SPEED                           "Velocidat"
#define MSG_NOZZLE                          "Nozzle"
#define MSG_BED                             "Base"
#define MSG_FAN_SPEED                       "Ixoriador"
#define MSG_FLOW                            "Fluxo"
#define MSG_CONTROL                         "Control"
#define MSG_MIN                             "\002 Min"
#define MSG_MAX                             "\002 Max"
#define MSG_FACTOR                          "\002 Fact"
#define MSG_AUTOTEMP                        "Autotemp"
#define MSG_ON                              "On"
#define MSG_OFF                             "Off"
#define MSG_PID_P                           "PID-P"
#define MSG_PID_I                           "PID-I"
#define MSG_PID_D                           "PID-D"
#define MSG_ACC                             "Acel"
#define MSG_VXY_JERK                        "Vxy-jerk"
#define MSG_VZ_JERK                         "Vz-jerk"
#define MSG_VE_JERK                         "Ves-jerk"
#define MSG_VMAX                            "Vmax"
#define MSG_X                               "x"
#define MSG_Y                               "y"
#define MSG_Z                               "z"
#define MSG_E                               "e"
#define MSG_VMIN                            "Vmin"
#define MSG_VTRAV_MIN                       "VTrav min"
#define MSG_AMAX                            "Amax"
#define MSG_A_RETRACT                       "A-retrac."
#define MSG_A_TRAVEL                        "A-travel"
#define MSG_XSTEPS                          "X trangos/mm"
#define MSG_YSTEPS                          "Y trangos/mm"
#define MSG_ZSTEPS                          "Z trangos/mm"
#define MSG_E0STEPS                         "E0 steps/mm"
#define MSG_E1STEPS                         "E1 steps/mm"
#define MSG_E2STEPS                         "E2 steps/mm"
#define MSG_E3STEPS                         "E3 steps/mm"
#define MSG_TEMPERATURE                     "Temperatura"
#define MSG_MOTION                          "Movimiento"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER          "Fil. Dia."
#define MSG_CONTRAST                        "Contrast"
#define MSG_STORE_EPROM                     "Alzar Memoria"
#define MSG_LOAD_EPROM                      "Cargar Memoria"
#define MSG_RESTORE_FAILSAFE                "Rest. d'emerchen."
#define MSG_REFRESH                         "Tornar a cargar"
#define MSG_WATCH                           "Monitorizar"
#define MSG_PREPARE                         "Preparar"
#define MSG_TUNE                            "Achustar"
#define MSG_PAUSE_PRINT                     "Pausar impresion"
#define MSG_RESUME_PRINT                    "Contin. impresion"
#define MSG_STOP_PRINT                      "Detener Impresion"
#define MSG_CARD_MENU                       "Menu de SD"
#define MSG_NO_CARD                         "No i hai tarcheta"
#define MSG_DWELL                           "Reposo..."
#define MSG_USERWAIT                        "Asperan. ordines"
#define MSG_RESUMING                        "Contin. impresion"
#define MSG_PRINT_ABORTED                   "Print aborted"
#define MSG_NO_MOVE                         "Sin movimiento"
#define MSG_KILLED                          "ATURADA D'EMERCH."
#define MSG_STOPPED                         "ATURADA."
#define MSG_CONTROL_RETRACT                 "Retraer mm"
#define MSG_CONTROL_RETRACT_SWAP            "Swap Retraer mm"
#define MSG_CONTROL_RETRACTF                "Retraer  F"
#define MSG_CONTROL_RETRACT_ZLIFT           "Devantar mm"
#define MSG_CONTROL_RETRACT_RECOVER         "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Swap DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "DesRet F"
#define MSG_AUTORETRACT                     "AutoRetr."
#define MSG_FILAMENTCHANGE                  "Cambear"
#define MSG_INIT_SDCARD                     "Encetan. tarcheta"
#define MSG_CNG_SDCARD                      "Cambiar tarcheta"
#define MSG_ZPROBE_OUT                      "Z probe out. bed"
#define MSG_POSITION_UNKNOWN                "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET                  "Z Offset"
#define MSG_BABYSTEP_X                      "Babystep X"
#define MSG_BABYSTEP_Y                      "Babystep Y"
#define MSG_BABYSTEP_Z                      "Babystep Z"
#define MSG_ENDSTOP_ABORT                   "Endstop abort"

#define MSG_HEATING_FAILED_LCD              "Heating failed"
#define MSG_ERR_REDUNDANT_TEMP              "Err: REDUNDANT TEMP ERROR"
#define MSG_THERMAL_RUNAWAY                 "THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP                     "Err: MAXTEMP"
#define MSG_ERR_MINTEMP                     "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED                 "Err: MAXTEMP BED"

#ifdef DELTA
  #define MSG_DELTA_CALIBRATE               "Delta Calibration"
  #define MSG_DELTA_CALIBRATE_X             "Calibrate X"
  #define MSG_DELTA_CALIBRATE_Y             "Calibrate Y"
  #define MSG_DELTA_CALIBRATE_Z             "Calibrate Z"
  #define MSG_DELTA_CALIBRATE_CENTER        "Calibrate Center"
#endif // DELTA

#define MSG_LASER                           "Laser Preset"
#define MSG_CONFIG                          "Configuration"
#define MSG_BAUDRATE                        "Baudrate"
#define MSG_E_BOWDEN_LENGTH                 "Extrude " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_R_BOWDEN_LENGTH                 "Retract " STRINGIFY(BOWDEN_LENGTH) "mm"
#define MSG_PURGE_XMM                       "Purge " STRINGIFY(LCD_PURGE_LENGTH) "mm"
#define MSG_RETRACT_XMM                     "Retract " STRINGIFY(LCD_RETRACT_LENGTH) "mm"

#ifdef FIRMWARE_TEST
  #define MSG_FWTEST_YES                    "Put the Y command to go next"
  #define MSG_FWTEST_NO                     "Put the N command to go next"
  #define MSG_FWTEST_YES_NO                 "Put the Y or N command to go next"
  #define MSG_FWTEST_ENDSTOP_ERR            "ENDSTOP ERROR! Check wire and connection"
  #define MSG_FWTEST_PRESS                  "Press and hold the endstop "
  #define MSG_FWTEST_INVERT                 "Reverse value in "
  #define MSG_FWTEST_XAXIS                  "Has the nozzle moved to the right?"
  #define MSG_FWTEST_YAXIS                  "Has the nozzle moved forward?"
  #define MSG_FWTEST_ZAXIS                  "Has the nozzle moved up?"
  #define MSG_FWTEST_01                     "Manually move the axes X, Y and Z away from the endstop"
  #define MSG_FWTEST_02                     "Do you want check ENDSTOP?"
  #define MSG_FWTEST_03                     "Start check ENDSTOP"
  #define MSG_FWTEST_04                     "Start check MOTOR"
  #define MSG_FWTEST_ATTENTION              "ATTENTION! Check that the three axes are more than 5 mm from the endstop!"
#endif // FIRMWARE_TEST

#endif // LANGUAGE_AN_H
