Skip to content

M
mongoose
Commit b99dc95b authored by Sergey Lyubka's avatar Sergey Lyubka
Browse files
Options

Fossa merge. 

PUBLISHED_FROM=12ccba10358075024a1195cd0b0c1ea132aae6a3
parent 75aadb3e
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 1220 deletions
docs/API.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose API Reference
struct mg_server *mg_create_server(void *server_param, mg_handler_t handler);
Creates web server instance. Returns opaque instance pointer, or NULL if
there is not enough memory. `server_param`: Could be any pointer, or NULL.
This pointer will be passed
to the callback functions as `struct mg_connection::server_param` field.
A common use case is to pass `this` pointer of the C++ wrapper class
as `user_param`, to let the callback get the pointer to the C++ object.
Note that this function doesn't make the
server instance to serve. Serving is done by `mg_poll_server()` function.
Mongoose has single-threaded, event-driven, asynchronous, non-blocking core.
When server instance is created, it contains an information about
the configuration and the state of each connection.
Server instance is capable on listening on only one port. After creation,
`struct mg_server` has a list
of active connections and configuration parameters.
Side-effect: on UNIX, `mg_create_server()` ignores SIGPIPE signals. If custom
processing is required SIGPIPE, signal handler must be set up after
calling `mg_create_server()`.
Important: Mongoose does not install `SIGCHLD` handler. If CGI is used,
`SIGCHLD` handler must be set up to reap CGI zombie processes.
void mg_destroy_server(struct mg_server **server);
Deallocates web server instance, closes all pending connections, and makes
server pointer a NULL pointer.
const char mg_set_option(struct mg_server *server, const char *name,
const char *value);
Sets a particular server option. Note that at least one option,
`listening_port`, must be specified. To serve static files, `document_root`
must be specified too. If `document_root` option is left unset, Mongoose
will not access filesystem at all. `mg_set_option()` returns NULL if option was
set successfully, otherwise it returns human-readable error string. It is
allowed to call `mg_set_option()` by the same thread that does
`mg_poll_server()` (Mongoose thread) and change server configuration while it
is serving, in between `mg_poll_server()` calls.
int mg_poll_server(struct mg_server *server, int milliseconds);
Performs one iteration of IO loop by iterating over all
active connections, performing `select()` syscall on all sockets with a timeout
of `milliseconds`. When `select()` returns, Mongoose
does an IO for each socket that has data to be sent or received. Application
code must call `mg_poll_server()` in a loop. It is an error to have more then
one thread calling `mg_poll_server()`, `mg_set_option()` or any other function
that take `struct mg_server *` parameter. Mongoose does not
mutex-protect `struct mg_server *`, therefore only single thread
(Mongoose thread) should make Mongoose calls.
`mg_poll_server()` calls user-specified event handler when certain events
occur. Sequence of events for the accepted connection is this:
* `MG_AUTH` - Mongoose asks whether this connection is authorized. If event
handler returns `MG_FALSE`, then Mongoose does not serve the request but
sends authorization request to the client. If `MG_TRUE` is returned,
then Mongoose continues on with the request.
* `MG_REQUEST` - Mongoose asks event handler to serve the request. If
event handler serves the request by sending a reply,
it should return `MG_TRUE`. Otherwise,
it should return `MG_FALSE` which tells Mongoose that request is not
served and Mongoose should serve it. For example, event handler might
choose to serve only RESTful API requests with URIs that start with
certain prefix, and let Mongoose serve all static files.
If event handler decides to serve the request, but doesn't have
all the data at the moment, it should return `MG_MORE`. That tells
Mongoose to keep the connection open after callback returns.
`mg_connection::connection_param` pointer is a placeholder to keep
user-specific data. For example, handler could decide to open a DB
connection and store DB connection handle in `connection_param`.
* `MG_POLL` is sent to every connection on every iteration of
`mg_poll_server()`. Event handler should return `MG_FALSE` to ignore
this event. If event handler returns `MG_TRUE`, then Mongoose assumes
that event handler has finished sending data, and Mongoose will
close the connection.
* `MG_HTTP_ERROR` sent when Mongoose is about to send HTTP error back
to the client. Event handler can choose to send a reply itself, in which
case event handler must return `MG_TRUE`. Otherwise, event handler must
return `MG_FALSE`.
* `MG_CLOSE` is sent when the connection is closed. This event is used
to cleanup per-connection state stored in `connection_param`
if it was allocated. Event handler return value is ignored.
Sequence of events for the client connection is this:
* `MG_CONNECT` sent when Mongoose has connected to the remote host.
This event is sent to the connection initiated by `mg_connect()` call.
Connection status is held in `mg_connection::status_code`: if zero,
then connection was successful, otherwise connection was not established.
User should send a request upon successful connection.
Event handler should return `MG_TRUE` if connection was successful and
HTTP request has been sent. Otherwise, it should send `MG_FALSE`.
* `MG_REPLY` is sent when response has been received from the remote host.
If event handler sends another request, then it should return `MG_TRUE`.
Otherwise it should return `MG_FALSE` and Mongoose will close the connection.
* `MG_CLOSE` same as for the accepted connection.
When mongoose buffers in HTTP request and successfully parses it, it sends
`MG_REQUEST` event for GET requests immediately. For POST requests,
Mongoose delays the call until the whole POST request is buffered in memory.
POST data is available to the callback as `struct mg_connection::content`,
and POST data length is in `struct mg_connection::content_len`.
Note that websocket connections are treated the same way. Mongoose buffers
websocket frame in memory, and calls event handler when frame is fully
buffered. Frame data is available `struct mg_connection::content`, and
data length is in `struct mg_connection::content_len`, i.e. very similar to
the POST request. `struct mg_connection::is_websocket` flag indicates
whether the request is websocket or not. Also, for websocket requests,
there is `struct mg_connection::wsbits` field which contains first byte
of the websocket frame which URI handler can examine. Note that to
reply to the websocket client, `mg_websocket_write()` should be used.
To reply to the plain HTTP client, `mg_write_data()` should be used.
Return value: number of active connections.
const char **mg_get_valid_option_names(void);
Returns a NULL-terminated array of option names and their default values.
There are two entries per option in an array: an option name followed by a
default value. A default value could be NULL. A NULL name indicates an end
of the array.
const char *mg_get_option(const struct mg_server *server, const char *name);
Returns the value of particular configuration parameter. If
given parameter name is not valid, NULL is returned. For valid names, return
value is guaranteed to be non-NULL. If parameter is not set, zero-length string
is returned.
void mg_wakeup_server_ex(struct mg_server *, mg_handler_t func,
const char *fmt, ...);
Sends string message to a server. Function `func` is called for every active
connection. String message is passed in `struct mg_connection::callback_param`.
This function is designed to push data to the connected clients, and
can be called from any thread. There is a limitation on the length of
the message, currently at 8 kilobytes.
void mg_send_status(struct mg_connection *, int status_code);
void mg_send_header(struct mg_connection *, const char *name,
const char *value);
void mg_send_data(struct mg_connection *, const void *data, int data_len);
void mg_printf_data(struct mg_connection *, const char *format, ...);
These functions are used to construct a response to the client. HTTP response
consists of three parts: a status line, zero or more HTTP headers,
a response body. Mongoose provides functions for all three parts:
* `mg_send_status()` is used to create status line. This function can be
called zero or once. If `mg_send_status()` is not called, then Mongoose
will send status 200 (success) implicitly.
* `mg_send_header()` adds HTTP header to the response. This function could
be called zero or more times.
* `mg_send_data()` and `mg_printf_data()` are used to send data to the
client. Note that Mongoose adds `Transfer-Encoding: chunked` header
implicitly, and sends data in chunks. Therefore, it is not necessary to
set `Content-Length` header. Note that `mg_send_data()` and
`mg_printf_data()` do not send data immediately. Instead, they spool
data in memory, and Mongoose sends that data later after URI handler
returns. If data to be sent is huge, an URI handler might
send data in pieces by saving state in
`struct mg_connection::connection_param` variable and returning `0`. Then
Mongoose will call a handler repeatedly after each socket write.
<!-- -->
void mg_send_file(struct mg_connection *, const char *path);
Tells Mongoose to serve given file. Mongoose handles file according to
it's extensions, i.e. Mongoose will invoke CGI script if `path` has CGI
extension, it'll render SSI file if `path` has SSI extension, etc. If `path`
points to a directory, Mongoose will show directory listing. If this function
is used, no calls to `mg_send*` or `mg_printf*` functions must be made, and
event handler must return `MG_MORE`.
size_t mg_websocket_write(struct mg_connection* conn, int opcode,
const char *data, size_t data_len);
size_t mg_websocket_printf(struct mg_connection* conn, int opcode,
const char *fmt, ...);
Similar to `mg_write()` and `mg_printf()`, but wraps the data into a
websocket frame with a given websocket `opcode`.
const char *mg_get_header(const struct mg_connection *, const char *name);
Get the value of particular HTTP header. This is a helper function.
It traverses http_headers array, and if the header is present in the array,
returns its value. If it is not present, NULL is returned.
int mg_get_var(const struct mg_connection *conn, const char *var_name,
char *buf, size_t buf_len);
Gets HTTP form variable. Both POST buffer and query string are inspected.
Form variable is url-decoded and written to the buffer. On success, this
function returns the length of decoded variable. On error, -1 is returned if
variable not found, and -2 is returned if destination buffer is too small
to hold the variable. Destination buffer is guaranteed to be
'\0' - terminated if it is not NULL or zero length.
int mg_parse_header(const char *hdr, const char *var_name, char *buf,
size_t buf_size);
This function parses HTTP header and fetches given variable's value in a buffer.
A header should be like `x=123, y=345, z="other value"`. This function is
designed to parse Cookie headers, Authorization headers, and similar. Returns
the length of the fetched value, or 0 if variable not found.
int mg_modify_passwords_file(const char *passwords_file_name,
const char *domain,
const char *user,
const char *password);
Add, edit or delete the entry in the passwords file.
This function allows an application to manipulate .htpasswd files on the
fly by adding, deleting and changing user records. This is one of the
several ways of implementing authentication on the server side.
If password is not NULL, entry is added (or modified if already exists).
If password is NULL, entry is deleted.
Return: 1 on success, 0 on error.
int mg_parse_multipart(const char *buf, int buf_len,
char *var_name, int var_name_len,
char *file_name, int file_name_len,
const char **data, int *data_len);
Parses a buffer that contains multipart form data. Stores chunk name
in a `var_name` buffer. If chunk is an uploaded file, then `file_name`
will have a file name. `data` and `data_len` will point to the chunk data.
Returns number of bytes to skip to the next chunk.
struct mg_connection *mg_connect(struct mg_server *server,
const char *host, int port, int use_ssl);
Create connection to the remote host. Returns `NULL` on error, non-null
if the connection has been scheduled for connection. Upon a connection,
Mongoose will send `MG_CONNECT` event to the event handler.
docs/AndroidBuild.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose Build on Android
This is a small guide to help you run mongoose on Android. Currently it is
tested on the HTC Wildfire. If you have managed to run it on other devices
as well, please comment or drop an email in the mailing list.
Note : You dont need root access to run mongoose on Android.
- Clone Mongoose Git repo
- Download the Android NDK from [http://developer.android.com/tools/sdk/ndk/index.html](http://developer.android.com/tools/sdk/ndk/index.html)
- Run `/path-to-ndk/ndk-build -C /path/to/mongoose`
That should generate mongoose/lib/armeabi/mongoose
- Using the adb tool (you need to have Android SDK installed for that),
push the generated mongoose binary to `/data/local` folder on device.
- From adb shell, navigate to `/data/local` and execute `./mongoose`.
- To test if the server is running fine, visit your web-browser and
navigate to `http://127.0.0.1:8080` You should see the `Index of /` page.
![screenshot](http://cesanta.com/images/android_build.png)
Notes:
- `jni` stands for Java Native Interface. Read up on Android NDK if you want
to know how to interact with the native C functions of mongoose in Android
Java applications.
- TODO: A Java application that interacts with the native binary or a
shared library.
docs/BasicWebsite.md deleted 100644 → 0
View file @ 75aadb3e
How To Create Basic Website With Mongoose
===========================================
## 1. Create a directory which will contain your website files. For example, on drive `C:\`, create a directory called `my_website`:
![screenshot](http://cesanta.com/images/tut_basic/tut1.png)
## 2. Inside `my_website` directory, create a new file called "index". This will be the default web page shown when the website is visited.
![screenshot](http://cesanta.com/images/tut_basic/tut2.png)
## 3. Open index file with your favorite editor (for example, Notepad) and enter some HTML code:
![screenshot](http://cesanta.com/images/tut_basic/tut3.png)
## 4. Save this file as `index.html`:
![screenshot](http://cesanta.com/images/tut_basic/tut4.png)
## 5. Download Mongoose executable from http://cesanta.com/mongoose.shtml and copy the executable inside `my_website` directory:
![screenshot](http://cesanta.com/images/tut_basic/tut5.png)
## 6. Double-click mongoose executable. An icon will appear on a system tray in the bottom right corner of the desktop:
![screenshot](http://cesanta.com/images/tut_basic/tut6.png)
## 7. Click on the mongoose icon and choose "Go to my address" menu:
![screenshot](http://cesanta.com/images/tut_basic/tut7.png)
## 8. A browser will popup displaying `index.html` file. Now, you can expand your website by adding more content.
![screenshot](http://cesanta.com/images/tut_basic/tut8.png)
docs/Embed.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose Embedding Guide
Embedding Mongoose is done in two steps:
1. Copy
[mongoose.c](https://raw.github.com/cesanta/mongoose/master/mongoose.c) and
[mongoose.h](https://raw.github.com/cesanta/mongoose/master/mongoose.h)
to your application's source tree and include them in the build.
2. Somewhere in the application code, call `mg_create_server()` to create
a server, configure it with `mg_set_option()` and loop with
`mg_poll_server()` until done. Call `mg_destroy_server()` to cleanup.
Here's a minimal application `app.c` that embeds mongoose:
#include "mongoose.h"
int main(void) {
struct mg_server *server = mg_create_server(NULL, NULL);
mg_set_option(server, "document_root", "."); // Serve current directory
mg_set_option(server, "listening_port", "8080"); // Open port 8080
for (;;) {
mg_poll_server(server, 1000); // Infinite loop, Ctrl-C to stop
}
mg_destroy_server(&server);
return 0;
}
To compile it, put `mongoose.c`, `mongoose.h` and `app.c` into one
folder, start terminal on UNIX or Visual Studio command line prompt on Windows,
and run the following command:
cc app.c mongoose.c -pthread -o app # on Unix
cl.exe app.c mongoose.c /TC /MD # on Windows
When run, this simple application opens port 8080 and serves static files,
CGI files and lists directory content in the current working directory.
It is possible to generate HTML page content. Mongoose can call user-defined
function when certain events occur.
That function is called _an event handler_, and it is the second parameter
to `mg_create_server()` function. Here is the example event handler function:
int event_handler(struct mg_connection *conn, enum mg_event ev) {
switch (ev) {
case MG_AUTH: return MG_TRUE;
default: return MG_FALSE;
}
}
Event handler is called by Mongoose with `struct mg_connection *`
pointer and an event number. `struct mg_connection *conn`
has all information about the request: HTTP headers, POST or websocket
data buffer, etcetera. `enum mg_event ev` tells which exactly event is sent.
For each event, an event handler returns a value which tells Mongoose how
to behave.
The sequence of events for every connection is this:
* `MG_AUTH` - Mongoose asks whether this connection is authorized. If event
handler returns `MG_FALSE`, then Mongoose does not serve the request but
sends authorization request to the client. If `MG_TRUE` is returned,
then Mongoose continues on with the request.
* `MG_REQUEST` - Mongoose asks event handler to serve the request. If
event handler serves the request by sending a reply,
it should return `MG_TRUE`. Otherwise,
it should return `MG_FALSE` which tells Mongoose that request is not
served and Mongoose should serve it. For example, event handler might
choose to serve only RESTful API requests with URIs that start with
certain prefix, and let Mongoose serve all static files.
If event handler decides to serve the request, but doesn't have
all the data at the moment, it should return `MG_MORE`. That tells
Mongoose to keep the connection open after callback returns.
`mg_connection::connection_param` pointer is a placeholder to keep
user-specific data. For example, handler could decide to open a DB
connection and store DB connection handle in `connection_param`.
* `MG_POLL` is sent to every connection on every iteration of
`mg_poll_server()`. Event handler should return `MG_FALSE` to ignore
this event. If event handler returns `MG_TRUE`, then Mongoose assumes
that event handler has finished sending data, and Mongoose will
close the connection.
* `MG_HTTP_ERROR` sent when Mongoose is about to send HTTP error back
to the client. Event handler can choose to send a reply itself, in which
case event handler must return `MG_TRUE`. Otherwise, event handler must
return `MG_FALSE`
* `MG_CLOSE` is sent when the connection is closed. This event is used
to cleanup per-connection state stored in `connection_param`
if it was allocated.
Let's extend our minimal application example and
create an URI that will be served by user's C code. The app will handle
`/hello` URI by showing a hello message. So, when app is run,
http://127.0.0.1:8080/hello will say hello, and here's the code:
#include <string.h>
#include "mongoose.h"
static int event_handler(struct mg_connection *conn, enum mg_event ev) {
if (ev == MG_AUTH) {
return MG_TRUE; // Authorize all requests
} else if (ev == MG_REQUEST && !strcmp(conn->uri, "/hello")) {
mg_printf_data(conn, "%s", "Hello world");
return MG_TRUE; // Mark as processed
} else {
return MG_FALSE; // Rest of the events are not processed
}
}
int main(void) {
struct mg_server *server = mg_create_server(NULL, event_handler);
mg_set_option(server, "document_root", ".");
mg_set_option(server, "listening_port", "8080");
for (;;) {
mg_poll_server(server, 1000); // Infinite loop, Ctrl-C to stop
}
mg_destroy_server(&server);
return 0;
}
## Example code
Mongoose source code contains number of examples, located in the
[examples](https://github.com/cesanta/mongoose/blob/master/examples/) directory.
To build any example, go to the respective directory and run `make`.
## Compilation flags
Below is the list of compilation flags that enable or disable certain
features. By default, some features are enabled, and could be disabled
by setting appropriate `NO_*` flag. Features that are disabled by default
could be enabled by setting appropriate `USE_*` flag. Bare bones Mongoose
is quite small, about 30 kilobytes of compiled x86 code. Each feature adds
a couple of kilobytes to the executable size, and also has some runtime penalty.
Note that some flags start with `NS_` prefix. This is because Mongoose uses
[Net Skeleton](http://github.com/cesanta/net_skeleton) as a low-level
networking engine. If user code has `#include <net_skeleton.h>`, then
all Net Skeleton functions will be available too.
-DMONGOOSE_NO_AUTH Disable MD5 authorization support
-DMONGOOSE_NO_CGI Disable CGI support
-DMONGOOSE_NO_DAV Disable WebDAV support
(PUT, DELETE, MKCOL, PROPFIND methods)
-DMONGOOSE_NO_DIRECTORY_LISTING Disable directory listing
-DMONGOOSE_NO_FILESYSTEM Disables all file IO, serving from memory only
-DMONGOOSE_NO_LOGGING Disable access/error logging
-DMONGOOSE_ENABLE_THREADS Enable mg_start_thread() function
-DMONGOOSE_NO_WEBSOCKET Disable WebSocket support
-DMONGOOSE_NO_USER No concept of a user on used platform.
(Platform does not provide getpwnam, setgid or setuid)
-DMONGOOSE_USE_IDLE_TIMEOUT_SECONDS=X Idle connection timeout, default is 30
-DMONGOOSE_USE_LUA Enable Lua scripting
-DMONGOOSE_USE_LUA_SQLITE3 Enable sqlite3 binding for Lua
-DMONGOOSE_USE_POST_SIZE_LIMIT=X POST requests larger than X will be
rejected, not set by default
-DMONGOOSE_USE_EXTRA_HTTP_HEADERS=X Append X to the HTTP headers
for static files, empty by default
-DNS_ENABLE_DEBUG Enables debug messages on stdout, very noisy
-DNS_ENABLE_SSL Enable SSL
-DNS_ENABLE_IPV6 Enable IPv6 support
-DNS_ENABLE_HEXDUMP Enables hexdump of sent and received traffic
-DNS_STACK_SIZE=X Sets stack size to X for ns_start_thread()
-DNS_DISABLE_THREADS Disable threads support
-DNS_DISABLE_SOCKETPAIR For systems without loopback interface
-DMONGOOSE_SEND_NS_EVENTS Send Net Skeleton events to the event handler
in addition to the Mongoose events
docs/FAQ.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose FAQ
## My Antivirus Software reports Mongoose as a security threat
Mongoose doesn't contain any malicious logic. Antivirus reports a
[false positive](http://en.wikipedia.org/wiki/Type_I_and_type_II_errors#False_positive_error).
This is when certain byte sequence in Mongoose accidentally matches
virus signature in the Antivirus database.
## Download page doesn't work
Please make sure Javascript is enabled in your browser, and that the
antivirus software is not blocking the download.
## MacOS message: "Mongoose.app is damaged and can’t be opened. You should move it to the Trash"
This happens on newer MacOS systems. The reason for the message
is the fact Mongoose.app is not digitally signed.
Mongoose download procedure changes the app on the fly by injecting
user information in the binary, making any prior digital signature void.
Open "System Preferences" -> "Security" and set "Allow apps downloaded from"
to "Anywhere". Revert the settings once Mongoose is installed.
## PHP doesn't work: getting empty page, or 'File not found' error
The reason for that is wrong paths to the interpreter. Remember that with PHP,
correct interpreter is `php-cgi.exe` (`php-cgi` on UNIX). Solution: specify
full path to the PHP interpreter, e.g.:
mongoose -cgi_interpreter /full/path/to/php-cgi
## Mongoose fails to start
If Mongoose exits immediately when run, this
usually indicates a syntax error in the configuration file
(named `mongoose.conf` by default) or the command-line arguments.
Syntax checking is omitted from Mongoose to keep its size low. However,
the Manual should be of help. Note: the syntax changes from time to time,
so updating the config file might be necessary after executable update.
### Embedding with OpenSSL on Windows might fail because of calling convention
To force Mongoose to use `__stdcall` convention, add `/Gz` compilation
flag to the Visual Studio project settings.
docs/FileSharing.md deleted 100644 → 0
View file @ 75aadb3e
How To Share Files With Mongoose
===========================================
## 1. Download Mongoose executable from http://cesanta.com/mongoose.shtml and copy the executable inside the directory you want to share:
![screenshot](http://cesanta.com/images/tut_sharing/tut1.png)
## 2. Double-click mongoose executable. A browser will start automatically, an icon will appear on a system tray in the bottom right corner of the desktop:
![screenshot](http://cesanta.com/images/tut_sharing/tut2.png)
## 3. Click on the mongoose icon
![screenshot](http://cesanta.com/images/tut_sharing/tut3.png)
## 4. Click on "Go to my address" to launch a browser locally. Or, to access a folder from another machine, launch a browser and type in the URL:
![screenshot](http://cesanta.com/images/tut_sharing/tut4.png)
docs/Internals.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose Internals
Mongoose has single-threaded, event-driven, asynchronous, non-blocking core.
`mg_create_server()` creates a web server instance. An instance is a container
for the config options and list of active connections. To do the actual
serving, user must call `mg_poll_server()`, which iterates over all
active connections, performing `select()` syscall on all sockets with a
timeout of specified number of milliseconds. When `select()` returns, Mongoose
does an IO for each socket that has data to be sent or received. Application
code must call `mg_poll_server()` in a loop.
Mongoose server instance is designed to be used by a single thread.
It is an error to have more then
one thread calling `mg_poll_server()`, `mg_set_option()` or any other function
that take `struct mg_server *` parameter. Mongoose does not
mutex-protect `struct mg_server *`, therefore the best practice is
to call server management functions from the same thread (an IO thread).
On a multi-core systems, many server instances can be created, sharing the
same listening socket and managed by separate threads (see [multi_threaded.c](https://github.com/cesanta/mongoose/blob/master/examples/multi_threaded.c))
example.
It is an error to pass and store `struct mg_connection *` pointers for
later use to send data. The reason is that they can be invalidated by the
next `mg_poll_server()` call. For such a task,
there is `mg_iterate_over_connections()` API
exists, which sends a callback function to the IO thread, then IO thread
calls specified function for all active connection.
When mongoose buffers in HTTP request and successfully parses it, it calls
appropriate URI handler immediately for GET requests. For POST requests,
Mongoose delays the call until the whole POST request is buffered in memory.
POST data is available to the callback as `struct mg_connection::content`,
and POST data length is in `struct mg_connection::content_len`.
Note that websocket connections are treated the same way. Mongoose buffers
websocket frame in memory, and calls URI handler when frame is fully
buffered. Frame data is available `struct mg_connection::content`, and
data length is in `struct mg_connection::content_len`, i.e. very similar to
the POST request. `struct mg_connection::is_websocket` flag indicates
whether the request is websocket or not. Also, for websocket requests,
there is `struct mg_connection::wsbits` field which contains first byte
of the websocket frame which URI handler can examine. Note that to
reply to the websocket client, `mg_websocket_write()` should be used.
To reply to the plain HTTP client, `mg_write()` should be used.
docs/Options.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose Configuration Options
### access\_control\_list
An Access Control List (ACL) allows restrictions to be put on the list of IP
addresses which have access to the web server. In the case of the Mongoose
web server, the ACL is a comma separated list of IP subnets, where each
subnet is prepended by either a `-` or a `+` sign. A plus sign means allow,
where a minus sign means deny. If a subnet mask is omitted, such as `-1.2.3.4`,
this means to deny only that single IP address.
Subnet masks may vary from 0 to 32, inclusive. The default setting is to allow
all accesses. On each request the full list is traversed, and
the last match wins. Example: `$ mongoose -access_control_list -0.0.0.0/0,+192.168/16` to deny all acccesses except those from `192.168/16` subnet. Note that if the option is set, then all accesses are forbidden
by default. Thus in a previous example, `-0.0.0.0` part is not necessary.
For example, `$mongoose access_control_list +10.0.0.0/8`
means disallow all, allow subnet 10/8 only.
To learn more about subnet masks, see the
[Wikipedia page on Subnetwork](http://en.wikipedia.org/wiki/Subnetwork)
Default: not set, all accesses are allowed.
### access\_log\_file
Path to a file for access logs. Either full path, or relative to the
mongoose executable. Default: not set, no query logging is done.
### auth_domain
Authorization realm used in `.htpasswd` authorization. Default: `mydomain.com`
### cgi_interpreter
Path to an executable to be used use as an interpreter for __all__ CGI scripts
regardless script extension. Default: not set, Mongoose looks at
[shebang line](http://en.wikipedia.org/wiki/Shebang_(Unix\).
For example, if both PHP and perl CGIs are used, then
`#!/path/to/php-cgi.exe` and `#!/path/to/perl.exe` must be first lines of the
respective CGI scripts. Note that paths should be either full file paths,
or file paths relative to the directory where mongoose executable is located.
If all CGIs use the same interpreter, for example they are all PHP, then
`cgi_interpreter` option can be set to the path to `php-cgi.exe` executable and
shebang line in the CGI scripts can be omitted.
**Note**: PHP scripts must use `php-cgi.exe`, not `php.exe`.
### cgi_pattern
All files that match `cgi_pattern` are treated as CGI files. Default pattern
allows CGI files be anywhere. To restrict CGIs to a certain directory,
use `/path/to/cgi-bin/**.cgi` as a pattern. Note that **full file path** is
matched against the pattern, not the URI.
When Mongoose starts CGI program, it creates new environment for it (in
contrast, usually child program inherits the environment from parent). Several
environment variables however are inherited from Mongoose's environment,
they are: `PATH`, `TMP`, `TEMP`, `TMPDIR`, `PERLLIB`, `MONGOOSE_CGI`. On UNIX
it is also `LD_LIBRARY_PATH`. On Windows it is also `COMSPEC`, `SYSTEMROOT`,
`SystemDrive`, `ProgramFiles`, `ProgramFiles(x86)`, `CommonProgramFiles(x86)`.
Default: `**.cgi$|**.pl$|**.php$`
### dav\_auth\_file
Authentication file for WebDAV mutation requests: `PUT`, `DELETE`, `MKCOL`.
The format of that file is the same as for the `.htpasswd` file
used for digest authentication. It can be created and managed by
`mongoose -A` command. Default: not set, WebDAV mutations are disallowed.
### document_root
A directory to serve. Default: current working directory.
### enable\_directory\_listing
Enable directory listing, either `yes` or `no`. Default: `yes`.
### enable\_proxy
Enable proxy functionality, either `yes` or `no`. If set to `yes`, then
browsers can be configured to use Mongoose as a proxy. Default: `no`.
### extra\_mime\_types
Extra mime types to recognize, in form `extension1=type1,extension2=type2,...`.
Extension must include dot. Example:
`mongoose -extra_mime_types .cpp=plain/text,.java=plain/text`. Default: not set.
### global\_auth\_file
Path to a global passwords file, either full path or relative to the mongoose
executable. If set, per-directory `.htpasswd` files are ignored,
and all requests are authorised against that file. Use `mongoose -A` to
manage passwords, or third party utilities like
[htpasswd-generator](http://www.askapache.com/online-tools/htpasswd-generator).
Default: not set, per-directory `.htpasswd` files are respected.
### hide\_files\_patterns
A pattern for the files to hide. Files that match the pattern will not
show up in directory listing and return `404 Not Found` if requested. Pattern
must be for a file name only, not including directory name, e.g.
`mongoose -hide_files_patterns secret.txt|even_more_secret.txt`. Default:
not set.
### index_files
Comma-separated list of files to be treated as directory index
files. Default: `index.html,index.htm,index.cgi,index.shtml,index.php`
### listening_port
Port to listen on. Port could be prepended by the specific IP address to bind
to, e.g. `mongoose -listening_port 127.0.0.1:8080`. Otherwise Mongoose
will bind to all addresses. To enable SSL, build Mongoose with
`-DNS_ENABLE_SSL` compilation option, and specify `listening_port` as
`ssl://PORT:SSL_CERTIFICATE.PEM`. Example SSL listener:
`mongoose -listening_port ssl://8043:ssl_cert.pem`. Note that PEM file should
be in PEM format, and must have both certificate and private key in it,
concatenated together. More than one listening port can be specified,
separated by comma,
for example `mongoose -listening_port 8080,8000`. Default: 8080.
### run\_as\_user
Switch to given user credentials after startup. UNIX-only. This option is
required when mongoose needs to bind on privileged port on UNIX, e.g.
$ sudo mongoose -listening_port 80 -run_as_user nobody
Default: not set.
### url\_rewrites
Comma-separated list of URL rewrites in the form of
`uri_pattern=file_or_directory_path`. When Mongoose receives the request,
it constructs the file name to show by combining `document_root` and the URI.
However, if the rewrite option is used and `uri_pattern` matches the
requested URI, then `document_root` is ignored. Instead,
`file_or_directory_path` is used, which should be a full path name or
a path relative to the web server's current working directory. Note that
`uri_pattern`, as all mongoose patterns, is a prefix pattern. If `uri_pattern`
is a number, then it is treated as HTTP error code, and `file_or_directory_path`
should be an URI to redirect to. Mongoose will issue `302` temporary redirect
to the specified URI with following parameters:
`?code=HTTP_ERROR_CODE&orig_uri=ORIGINAL_URI&query_string=QUERY_STRING`.
If `uri_pattern` starts with `@` symbol, then Mongoose compares
it with the `HOST` header of the request. If they are equal, Mongoose sets
document root to `file_or_directory_path`, implementing virtual hosts support.
Examples:
# Redirect all accesses to `.doc` files to a special script
mongoose -url_rewrites **.doc$=/path/to/cgi-bin/handle_doc.cgi
# Implement user home directories support
mongoose -url_rewrites /~joe/=/home/joe/,/~bill=/home/bill/
# Redirect 404 errors to a specific error page
mongoose -url_rewrites 404=/cgi-bin/error.cgi
# Virtual hosts example: serve foo.com domain from different directory
mongoose -url_rewrites @foo.com=/var/www/foo.com
Default: not set.
docs/PhpWebsite.md deleted 100644 → 0
View file @ 75aadb3e
How To Create A PHP Website With Mongoose
===========================================
## 1. Create a directory which will contain your website files. For example, on drive `C:\`, create a directory called `my_website`:
![screenshot](http://cesanta.com/images/tut_php/tut1.png)
## 2. Inside `my_website` directory, create a new file called "index". This will be the default web page shown when the website is visited.
![screenshot](http://cesanta.com/images/tut_php/tut2.png)
## 3. Open index file with your favorite editor (for example, Notepad) and enter some HTML / PHP code:
![screenshot](http://cesanta.com/images/tut_php/tut3.png)
## 4. Save this file as `index.php`:
![screenshot](http://cesanta.com/images/tut_php/tut4.png)
## 5. Download Mongoose executable from http://cesanta.com/mongoose.shtml and copy the executable inside `my_website` directory:
![screenshot](http://cesanta.com/images/tut_php/tut5.png)
## 6. Double-click mongoose executable. An icon will appear on a system tray in the bottom right corner of the desktop:
![screenshot](http://cesanta.com/images/tut_php/tut6.png)
## 7. Download PHP 5.3 zip (do NOT download PHP 5.5 cause you might have missing DLLs problem) from http://windows.php.net/download and extract it to `C:\php5` directory:
![screenshot](http://cesanta.com/images/tut_php/tut7.png)
## 8. Click on the mongoose icon and choose "Edit Settings" menu.:
![screenshot](http://cesanta.com/images/tut_php/tut8.png)
## 9. A settings dialog will appear. Click on `cgi_interpreter` button:
![screenshot](http://cesanta.com/images/tut_php/tut9.png)
## 10. Choose `C:\php5\php-cgi.exe` and click "Save Settings":
![screenshot](http://cesanta.com/images/tut_php/tut10.png)
## 11. Click on the mongoose icon and choose "Go to my address" menu:
![screenshot](http://cesanta.com/images/tut_php/tut11.png)
## 12. A browser will popup displaying `index.php`.
![screenshot](http://cesanta.com/images/tut_php/tut12.png)
docs/ReleaseNotes.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose Release Notes
## Release 5.6, 2015-03-17
Changes in Libmongoose library:
- Added `-dav_root` configuration option that gives an ability to mount
a different root directory (not document_root)
- Fixes for build under Win23 and MinGW
- Bugfix: Double dots removal
- Bugfix: final chunked response double-send
- Fixed compilation in 64-bit environments
- Added OS/2 compatibility
- Added `getaddrinfo()` call and `NS_ENABLE_GETADDRINFO`
- Various SSL-related fixes
- Added integer overflow protection in `iobuf_append()` and `deliver_websocket_frame()`
- Fixed NetBSD build
- Enabled `NS_ENABLE_IPV6` build for Visual Studio 2008+
- Enhanced comma detection in `parse_header()`
- Fixed unchanged memory accesses on ARM
- Added ability to use custom memory allocator through NS_MALLOC, NS_FREE, NS_REALLOC
Changes in Mongoose binary:
- Added `-start_browser` option to disable automatic browser launch
- Added experimental SSL support. To listen on HTTPS port, use `ssl://PORT:SSL_CERT` format. For example, to listen on HTTP port 8080 and HTTPS port 8043, use `-listening_port 8080,ssl://8043:ssl_cert.pem`
## Release 5.5, October 28 2014
Changes in Libmongoose library:
- Added new API function: `mg_forward()` for proxying functionality
- Added new API function: `mg_send_file_data()` for sending file data
- Added new utility API functions: `mg_mmap() and mg_munmap()`
- Changed the way SSL settings are handled: removed `ssl_certificate` and
`ssl_ca_certificate` options, and instead made `listening_port` accept
`ssl://PORT:SSL_CERT:CA_CERT` notation
- Added ability to listen on multiple ports, see `listening_port` documentation
- Added `enable_proxy` option
- Added [cookie_authentication](https://github.com/cesanta/mongoose/tree/master/examples/cookie_authentication) example
- Added [websocket\_ssl\_proxy](https://github.com/cesanta/mongoose/tree/master/examples/websocket_ssl_proxy) example
- Added [http_client](https://github.com/cesanta/mongoose/tree/master/examples/http_client) example
- Increased default 'idle connection' timeout from 30 to 300 seconds
- Fixed MinGW build
- Refactored all examples, put each in it's own directory with dedicated build
- Many smaller bugfixed, including SSL, CGI, API, proxy, etc
Changes in pre-compiled binaries:
- Support for multiple listening ports
- Fixed CGI handling for scripts that specify interpreter in the hashbang line
## Release 5.4, July 28 2014
Changes in Libmongoose library:
- Added `hexdump_file` option for low-level request/reply debugging
- Added `mg_template()` API function for generating HTML pages from
templates with expansions
- Fixed `struct mg_connection::local_ip` handling, `mg_set_option()`
behavior with NULL values
- Added `mg_send_file()` call to send arbitrary file to the client
- Added `mg_terminate_ssl()` for SSL termination functionality
- Added HTTP proxy support, `enable_proxy` config option
- Added `mg_next()` for iterating over existing active connections
- Added client-side SSL auth, `ssl_ca_certificate` option
- Added `mg_wakeup_server_ex()` for pushing messages to existing connections
- Added `MG_WS_HANDSHAKE` and `MG_WS_CONNECT` events that are sent on
Websocket handshake is connection establishment, respectively
- Removed server-side Lua support
- Filesystem access, reading from socket/SSL performance improvements
- DAV PROPFIND memory leak fixed
- Added `big_upload.c` and enhanced `upload.c` example
- Added `proxy.c` example that demonstrates proxy functionality and SSE pushes
- Added `websocket2.c` example that shows simple web chat implementation
over websockets
- Various minor fixes
Changes in pre-compiled binaries:
- Created HTML administration console
- When server is started, browser is started automatically
- Fixed directory listing bug when directory contains `#` character
- Removed built-in Lua Server Pages in the binary, and instead
added Mongoose + Lua developer bundle which has Lua Server Pages support.
That also solves external Lua modules loading problem.
## Release 5.3, March 10 2014
Changes in Libmongoose library:
* Moved to the evented API. Updated API documentation is at
http://cesanta.com/docs/Embed.shtml
http://cesanta.com/docs/API.shtml
* Added `MG_LUA` event for exporting custom variables to the Lua environment
* Added virtual hosts capability, see `url_rewrites` option description at
http://cesanta.com/docs/Options.shtml
* Added mjpg serving example
* Cleaned up and documented HTTP client API, with unit tests
* Added `mg_wakeup_server()` to awaken `mg_poll_server()`
from another thread
* Moved Mongoose IO core to [https://github.com/cesanta/net_skeleton](Net Skeleton)
* Added connection hexdump functionality for developers
* Bug fixes
Changes in pre-compiled binaries:
* New awesome Mongoose logos by our designer Katrin - thanks Katrin!
Check them out at http://cesanta.com/products.shtml
* Added Lua Server Pages support to the free version, quick intro is at
http://cesanta.com/docs/Lua.shtml
* Added quick "Set shared directory" menu item to set `document_root`
* Added SSI support to the Pro version
* Removed SSL support from the Pro version
## Release 5.2, Feb 1 2014
* Windows binary made fully UNICODE aware. In previous versions,
the presence of non-ASCII chars in document root, CGI script name,
or directory name might have broken Mongoose as stand-alone
or as Windows service. Now Mongoose works with non-ASCII paths properly.
Internally, Mongoose uses UTF8 encoding. When making WinAPI calls,
mongoose converts UTF8 strings to wide chars and calls UNICODE API.
* Enhanced authorization API by providing `mg_set_auth_handler()` and
`mg_authorize_digest()`
* Removed `mg_add_uri_handler()`, added `mg_set_request_handler()`.
There is only oneURI handler that handles all requests, just like in 4.x.
The reason for this change is to provide an ability to catch all URIs,
and at the same time signal Mongoose to continue handling specific URIs.
* Added `mg_parse_multipart()` API for file uploads.
Note that the restriction on uploading huge files still exists,
and will be eliminated in the next release.
* Allowing mongoose to bind to port 0, in which case it'll bind to any
random unused port.
* Moved `idle_timeout_ms` run-time option to compile-time flag
* Added asynchronous HTTP client, not documented yet. Documentation and
examples are coming in the next couple of weeks. Async Websocket client
is scheduled for the next release. See usage examples at `unit_test.c`
* Windows and MacOS pre-built binaries are now split to free and paid ones,
paid binaries include CGI, SSL, Lua, Sqlite, support and updates.
Linux pre-built binary includes all functionality and is free, and will
continue to be free. Source code for Windows and MacOS GUI is closed.
Disclaimer: source code for the command line stand-alone server,
as well as Mongoose library itself, will never be closed.
* Multiple bug fixes and minor enhancements
## Release 5.1, Jan 10 2014
* CGI-related bugs where fixed, primarily for Windows platform
* Bugs on Windows related to UNICODE support were fixed
* Added a feature to support "error pages" through redirect.
Done using `-url_redirects` option, details are on
http://cesanta.com/docs/Options.shtml
## Release 5.0, Jan 6 2014
* Internal core has been changed from blocking, thread-per-connection to
non-blocking, asynchronous, one thread for all.
* API modification for server creation and response creation. That allowed
keep-alive support for dynamic requests, boosting the embedded performance
to 100+ thousands requests per second on a single core
(as measured on my development MacBook laptop)
* Unified handling of POST requests and Websocket requests by putting a
payload into `conn->content`, `conn->content_len` attributes.
That simplified user code and eliminated the need of `mg_read()`,
since mongoose buffers all data prior to calling the callback
* keep-alive support is the default
* Dropped SSI support and throttling support
* Several configuration parameters are gone:
* `cgi_environment` (replaced with MONGOOSE_CGI),
* `protect_uri` (not useful)
* `ssi_pattern` (SSI support is gone)
* `throttle` (throttling support is gone)
* `error_log_file` (not used)
* `enable_keep_alive` (enabled by default)
* `listening_ports` (renamed to listening_port)
* `num_threads` (core has changed to single thread)
* `put_delete_auth_file` (renamed to dav_auth_file)
* `authentication_domain` (renamed to auth_domain)
* Due to the async, non-blocking nature of the core, few restrictions
are now in place:
* user callbacks must not block
* POST and Websocket data are now buffered, and cannot be huge
* mongoose is now capable on listening on only one port
## Release 4.1, Oct 2013
## Release 4.0, Oct 2013
## Release 3.8, Sep 2013
## Release 3.7, Feb 2 2013
* Added "redirect to SSL port" functionality, e.g. if you specify
`-listening_ports 8080r,8043s`
then all requests to HTTP port 8080 will be redirected to HTTPS port 8043
* Added `mg_download()` API, an HTTP client interface!
* Lua server pages now must output HTTP headers -- full control for Lua
* Added pre-built binary for MacOS, with initial GUI support
* API change: got rid of events, moved to struct `mg_callbacks`
* Bugfixes, thanks to contributors
## Release 3.7, Jan 18 2013
* Fixed source code archive (main.c was missing)
* Extended Windows GUI functionality:
* Added "Start browser" systray popup menu item
* Enhanced configuration editor
* Renamed config options:
* `put_delete_passwords_file` -> `put_delete_auth_file`
* `global_passwords_file` -> `global_auth_file`
* `select()` changed to `poll()`, to avoid big file descriptor
`FD_SET` problem on UNIX
* Couple of bugfixes, thanks to contributors
Earlier release notes could be found by searching
[Mongoose mailing list](https://groups.google.com/forum/#!forum/mongoose-users)
docs/SSL.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose SSL guide
SSL is a protocol that makes web communication secure. To enable SSL
in mongoose, 2 steps are required:
1. Create valid SSL certificate file
2. Append SSL certificate file path to the `listening_ports` option
Below is the `mongoose.conf` file snippet for typical SSL setup:
document_root www_root # Serve files in www_root directory
listening_ports 80,ssl://443:cert.pem # Listen on ports 80 and 443
## How to create SSL certificate file
SSL certificate file is a text file that must contain at least two
sections:
1. A private key
2. A certificate
Both sections should be chunks of text in PEM format. When PEM file is
opened in a text editor, it looks like this:
-----BEGIN RSA PRIVATE KEY-----
MIIEogIBAAKCAQEAwONaLOP7EdegqjRuQKSDXzvHmFMZfBufjhELhNjo5KsL4ieH
hYN0Zii2yTb63jGxKY6gH1R/r9dL8kXaJmcZrfSa3AgywnteJWg=
-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIIDBjCCAe4CCQCX05m0b053QzANBgkqhkiG9w0BAQQFADBFMQswCQYDVQQGEwJB
SEGI4JSxV56lYg==
-----END CERTIFICATE-----
Two aforementioned sections are clearly seen. Typically, those section
are bigger then in the example shown. The text between the `BEGIN` and
`END` is the text representation of binary data, a private key and a
certificate. Therefore, in order to create a certificate file,
* private key must be converted to PEM format
* certificate must be converted to PEM format
* those two should be concatenated into a single file
If the certificate chain in used, a chain file also needs to be
converted into PEM format and appended to the certificate file.
## How SSL works
SSL is a protocol that can encrypt communication between two parties. If third
party observes all messages passed by, it would be very
hard for the third party (though not impossible) to decrypt the communication.
The idea is based on so-called public key encryption. Communicating parties
have two keys: a public key and a private key. A public key is advertised
to everybody, and it is contained in a certificate. A private key is kept
secret. Security algorithm works in a way that anybody can encrypt
a message using public key, and only private key can decrypt it.
This is why web server needs both private key and certificate: private key
is used to decrypt incoming messages, and certificate is used to tell the
public key to the other party. When communication starts, parties exchange
their public keys, and keep private keys to themselves. Man-in-the-middle
who observes the communication is unable to decrypt the messages cause
private keys are required for decryption.
Encryption algorithms are built on top of hard mathematical problem, which
makes it very expensive for man-in-the-middle to compute private keys.
For example, RSA algorithm is based on a mathematical problem of factorization.
It is easy to generate two very large prime numbers `P` and `Q` and make
a product `P * Q`. But given a product, it is very hard to recover these
two prime numbers - this is called factorization.
docs/Usage.md deleted 100644 → 0
View file @ 75aadb3e
# Mongoose User Guide
Mongoose is small and easy to use web server built on top of
mongoose library. It is designed with maximum simplicity in mind. For example,
to share any directory, just drop mongoose executable in that directory,
double-click it (on UNIX, run it from shell) and launch a browser at
[http://localhost:8080](http://localhost:8080) Note that 'localhost' should
be changed to a machine's name if a folder is accessed from other computer.
On Windows and Mac, Mongoose iconifies itself to the system tray when started.
Right-click on the icon to pop up a menu, where it is possible to stop
mongoose, or configure it.
On UNIX, `mongoose` is a command line utility. Running `mongoose` in
terminal, optionally followed by configuration parameters
(`mongoose [OPTIONS]`) or configuration file name
(`mongoose [config_file_name]`) starts the
web server:
$ mongoose -document_root /var/www # Running mongoose with cmdline options
$ mongoose /etc/my_config.txt # Running mongoose with config file
$ mongoose # Running with no parameters. This will
# serve current directory on port 8080
Mongoose does not detach from terminal. Pressing `Ctrl-C` keys
stops the server.
When started, mongoose first searches for the configuration file.
If configuration file is specified explicitly in the command line, then
specified configuration file is used.
Otherwise, mongoose would search for file `mongoose.conf` in the same directory
where binary is located, and use it. Configuration file can be absent.
Configuration file is a sequence of lines, each line containing
command line argument name and it's value. Empty lines and lines beginning
with `#` are ignored. Here is the example of `mongoose.conf` file:
# This is a comment
document_root C:\www
listening_port 80
ssl_certificate C:\mongoose\ssl_cert.pem
Command line arguments are highest priority and can override
configuration file settings. For example, if `mongoose.conf` has line
`document_root /var/www`, and mongoose has been started as
`mongoose -document_root /etc`, then `/etc` directory will be used as
document root.
Note that configuration options on the command line must start with `-`,
and their names are the same as in the config file. Exampli gratia,
the following two setups are equivalent:
$ mongoose -listening_port 1234 -document_root /var/www
$ cat > mongoose.conf
listening_ports 1234
document_root /var/www
^D
$ mongoose
Mongoose can also be used to modify `.htpasswd` passwords file:
$ mongoose -A .htpasswd mydomain.com user_name user_password
Unlike other web servers, mongoose does not require CGI scripts be located in
a special directory. CGI scripts can be anywhere. CGI (and SSI) files are
recognized by the file name pattern. Mongoose uses shell-like glob
patterns. Pattern match starts at the beginning of the string, so essentially
patterns are prefix patterns. Syntax is as follows:
** Matches everything
* Matches everything but slash character, '/'
? Matches any character
$ Matches the end of the string
| Matches if pattern on the left side or the right side matches.
All other characters in the pattern match themselves. Examples:
# Pattern Meaning
**.cgi$ Any string that ends with .cgi
/foo Any string that begins with /foo
**a$|**b$ Any string that ends with a or b
To restrict CGI files only to `/cgi-bin/` directory, use this setting:
$ mongoose -cgi_pattern /cgi-bin/*.cgi # Emulate /cgi-bin/ restriction
scripts/embed_binary_files.pl deleted 100644 → 0
View file @ 75aadb3e
# This program is used to embed arbitrary data into a C binary. It takes
# a list of files as an input, and produces a .c data file that contains
# contents of all these files as collection of char arrays.
#
# Usage: perl <this_file> <file1> [file2, ...] > embedded_data.c
foreach my $i (0 .. $#ARGV) {
open FD, '<:raw', $ARGV[$i] or die "Cannot open $ARGV[$i]: $!\n";
printf("static const unsigned char v%d[] = {", $i);
my $byte;
my $j = 0;
while (read(FD, $byte, 1)) {
if (($j % 12) == 0) {
print "\n";
}
printf ' %#04x,', ord($byte);
$j++;
}
print " 0x00\n};\n";
close FD;
}
print <<EOS;
#include <stddef.h>
#include <string.h>
static const struct embedded_file {
const char *name;
const unsigned char *data;
size_t size;
} embedded_files[] = {
EOS
foreach my $i (0 .. $#ARGV) {
print " {\"$ARGV[$i]\", v$i, sizeof(v$i) - 1},\n";
}
print <<EOS;
{NULL, NULL, 0}
};
const char *find_embedded_file(const char *name, size_t *size) {
const struct embedded_file *p;
for (p = embedded_files; p->name != NULL; p++) {
if (!strcmp(p->name, name)) {
if (size != NULL) { *size = p->size; }
return (const char *) p->data;
}
}
return NULL;
}
EOS
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment