<?xml version="1.0" encoding="utf-8"?>
<Product xmlns='http://code.google.com/p/open-zwave/'>
	<!-- Configuration Parameters -->
	<CommandClass id="112">
		<Value type="byte" index="1" genre="config" label="Basic Set Level" units="%" min="0" max="99" value="99">
			<Help>
				Defines the level in the Basic Set event sent to group 2 when the sensor is triggered.  Default is 99 (full brightness for a Z-Wave dimmer). 0 disables.
			</Help>
		</Value>
		<Value type="byte" index="2" genre="config" label="Temperature On Trigger" units="degrees" min="-20" max="99" value="30">
			<Help>
				Temperature level to trigger when a ON command is sent out. 99 will clear the value.
			</Help>
		</Value>
		<Value type="byte" index="3" genre="config" label="Temperature Off Trigger" units="degrees" min="-20" max="99" value="20">
			<Help>
				Temperature level to trigger when an OFF command is sent out. 99 will clear the value.
			</Help>
		</Value>
		<Value type="byte" index="4" genre="config" label="Humidity On Trigger" units="%" min="20" max="99" value="50">
			<Help>
				Humidity level to trigger when a ON command is sent out. 99 will clear the value.
			</Help>
		</Value>
		<Value type="byte" index="5" genre="config" label="Humidity Off Trigger" units="%" min="20" max="99" value="40">
			<Help>
				Humidity level to trigger when a OFF command is sent out. 99 will clear the value.
			</Help>
		</Value>
		<Value type="short" index="6" genre="config" label="Auto Report Time" units="minutes" min="0" max="1439" value="0">
			<Help>
				Sets the auto report time interval. 0 disables.
			</Help>
		</Value>
		<Value type="byte" index="7" genre="config" label="Auto Report Temperature" units="degrees" min="0" max="70" value="0">
			<Help>
				Sets the auto report temperature trigger interval. 0 disables.
			</Help>
		</Value>
		<Value type="byte" index="8" genre="config" label="Auto Report Humidity" units="%" min="5" max="70" value="0">
			<Help>
				Sets the auto report humidity trigger interval. 0 disables.
			</Help>
		</Value>
	</CommandClass>

	<!-- COMMAND_CLASS_ASSOCIATION. Groups -->
	<CommandClass id="133">
		<Associations num_groups="2">
			<Group index="1" max_associations="1" label="Reports" auto="true" />
			<Group index="2" max_associations="3" label="Basic" auto="true" />
		</Associations>
	</CommandClass>
	<CommandClass id="96" mapping="endpoints" />
</Product>